Find experienced local carpenters in Caulfield North

Attach 1 wooden panel above dishwasher and 1 kickboard underneath.

I’m after an experience cabinet maker, carpenter or builder to mount a TV cabinet on to a wall. Cabinet is approx 2.5m long. Brackets were supplied with the cabinet. We can assist with lifting if required.

Custom fragrance cabinet – make and install Looking for an experienced cabinetmaker to create and securely wall-mount a fragrance cabinet based on the attached reference. Arched design with a burgundy marble surround, glass door, glass shelves and brass hardware. I can supply the marble surface material. Dimensions and remaining materials to be discussed. Please quote for fabrication and installation.

Hi, it's a small area cleaning and restaining deck! -move three succulent plants to garage (1 metre away) -deck wash/clean -mould and tannin removal if needed -light sand (not a full restoration) -two coats of quality decking oil or stain -clean up

Have you worked on mortised timber sliding door before? I need an experienced carpenter/repairer to replace two rollers on old Timber Sliding door. You need to take out the old worn out rollers, then visit local Bunnings and get the new rollers with the right size, etc.

Looking for an experienced carpenter or handyman to inspect and repair water-damaged timber fascia and barge boards on the front of a two-storey townhouse. Some sections have peeling paint and possible timber rot. Please advise whether repairs with epoxy are suitable or if sections need replacing. Job to include painting . Quotation required

The timber plinth (base board) running along the bottom of my horizontal slat fence has come loose and is lying on the ground along the footpath — roughly a 2–3 metre section near the corner pillar. It needs to be reattached securely to the fence posts/rails, or replaced with a new board if the timber is too weathered to reuse.

Polish stained timber floors in a small area where there are light scuff marks dinning chairs

Install a wooden sliding room divider between the entrance and lounge area. The divider should be 1 meter wide and 2.3 meters tall. The material is provided, but you will need to bring your own tools. If possible, please note a preferred installation time. Let me know if you need any additional info.

I need to increase the opening height from 1780mm to approximately 1860mm to fit a Hitachi refrigerator (1833mm high). Looking to retain the existing cabinet doors if possible. Please let me know: * Your experience with similar jobs * An estimated cost * Your availability on 11 July Thanks!

Needs a Carpenter to create a proper heat seal.

2x bedroom needs new wardrobe style Looking for a creative carpenter to demolish the previous wardrobe and replace with new ones. Ive attached the image of how I like the wardrobe to be. 2x small bedrooms 2.8 x 2.8 and 2.8 x 2.3- finding a good smart wardrobe space and styles. Looking for full length, with some drawer and oak material in and out.

Wood cupboard repairs. Repair door hinges, new piano hinge, repair anchor wood piece add holding arm or chain to support. Repair bottom door to close properly

leaking kitchen taps have damaged the cabinet, and cabinet needs to be repaired

Would like to place a door on the space to cover it up and turn it into a broom cupboard of sorts. Would need to supply and colour match to the rest of the cabinetry. I don’t know the colour otherwise I would do it myself, I need someone who is able to colour match. If a colour match isn’t possible and you have other ideas on how to make the space usable and less of an eyesore open to that as well (eg shelving etc). Price negotiable happy for anything fair and reasonable

Deck to be psinted around the pool approx 80 sq metres I have all the materials

Connect hinges to cabinet door

We would like to install LED strip lights in our timber handrails rails. We need to remove the handrails and have them routed to install that light and diffuser. Need experienced carpenter to be able to do the job either on site or takeaway and return.

This bed was just purchased that isn’t level. It’s a couch/bed if someone is able to make it level please

I need two wooden tops cut to fit a computer table spot and below the tv. Also have 3 doors made to cover 3 spots, as shown in pictures.