Find experienced local carpenters in Melbourne

Carpenter needed to remove carpet from 2 bedrooms (original boards underneath 🙏), assist in fixing handles and hinges on 2 sets of bifold doors.

I need a wall-mounted melamine particleboard cabinet in my laundry narrowed so I can stack a 600mm washer-dryer on top of my existing washing machine. The cabinet's side currently protrudes into that space and blocks it. The clear width beside the cabinet is 596mm. A 600mm appliance won't fit, and it needs clearance to slide in and not transmit vibration into the cabinet. I need the clear opening increased to at least 615mm, ideally 640mm — roughly 25–45mm off the cabinet's width. The job as I understand it (tell me if you'd approach it differently): 1. Take the cabinet off the wall (I'll empty it first) 2. Cut down and narrow the cabinet and reseat the side panel 3. Rehang and refix securely (it sits above head height over the appliances) Photos attached showing the cabinet, the gap, and the measurement. In your offer, please tell me: whether my scope is right or you'd do it differently and rough time on site.

I need this bathroom mirror with cabinet installed onto tile https://www.templeandwebster.com.au/Bronte-600mm-Arch-Mirrored-Shaving-Cabinet-TMPL6372.html

Assemble 4 new stainless tables with castors from Brayco stainless equipment, reattach 1 x doors to metal filing cabinet, assemble wire shelves and put up whiteboard. Maybe a couple of other similar tasks. Required today preferably.

LAUNDRY - Tall cabinet - with drawer at bottom and cupboard at top. For washer and dryer Cupboard above sink (mock photo) KITCHEN - Two drawers moved in microwave space so that drawer dishwasher can be discarded and normal sized dishwasher installed (if possible) Cabinets provided by tradie If possible

Would like this bookshelf sanded back and refinished, potentially in a darker wood stain. Then need it secured to the wall. Dimensions approx 230cm x 91cm

Custom Plywood Sunken Bed Frame – Carpenter Wanted Looking for a cabinet maker/carpenter to build a custom low-profile sunken platform bed. I have a specific design in mind and can provide photos/renderings of exactly what I’m after. Details: * Custom-built from quality plywood, preferably birch ply or similar * 20cm-high bed frame * Mattress is approximately 30cm high * Mattress sits recessed into the frame, with the top of the mattress sitting slightly above the platform edge * Wide plywood platform surrounding the mattress * Platform extends much further on the left side to create a large bedside/platform area * Bed positioned close to the wardrobe on the right, with only a small walkway remaining * Plywood panel across the entire rear wall behind the bed * No drawers or unnecessary features — simple, clean and minimal Ready to hire and start

Replace Restaurant Drawer Runners – URGENT We need an experienced cabinet maker / handyman to replace the existing drawer runners at our restaurant in Melbourne CBD. The drawers are constantly sticking and coming off the tracks, so we want to replace the existing runners with strong, heavy-duty runners suitable for daily commercial restaurant use. Job: * Remove existing runners * Supply & install heavy-duty runners * Reinforce fixing points if needed * Align and test all drawers * We want a long-term, stronger solution, not just a repair Please recommend the best runner option, and provide an alternative option if available. Please include: total cost (labour + materials) and your earliest availability. Photos attached. URGENT – looking to get this done ASAP.

Carpenter Required – Replace Damaged/Rotten Door Architrave & Timber Trim Task Description We require an experienced carpenter/handyman to repair and replace damaged timber architrave/trim around an internal doorway. Sections of the existing timber have deteriorated, particularly around the bottom corners and along the lower/side sections of the door frame. Please refer to the attached photos and measurements. Scope of works: * Remove the damaged/rotted sections of existing timber architrave/trim. * Supply and install replacement timber of a matching or closest available profile and dimensions. * Check the surrounding timber to ensure all deteriorated material is removed. * Cut and join replacement sections neatly into the existing architrave. * Fill nail holes, gaps and joins. * Sand and prepare repaired areas. * Caulk where required for a clean finish. * Prime and paint the new/repaired timber white to match the existing finish. * Remove and dispose of all damaged timber and waste. * Leave the work area clean and tidy. The attached photographs include measurements of the affected areas; however, the successful Tasker should confirm all dimensions on site before purchasing/cutting materials. We are looking for a neat, professional repair rather than a temporary patch.

Timber courtyard door at an apartment in Richmond has become tight and is sticking/rubbing against the frame, particularly around the latch side. It takes more force than it should to open and close and can make quite a bit of noise when closing. Looking for someone to inspect and adjust the door so it opens and closes smoothly. It may need to be planed/shaved slightly and the exposed timber resealed, or otherwise adjusted as appropriate. Ideally looking to have this done fairly soon as the apartment is about to be made available for a long-term tenant.

1 mirrored bathroom cabinet to be installed

Two floorboards are damaged and need replaced. The replacement boards don't need to perfectly match (this is coming ahead of a later renovation), but a close stain would be great.

Help, my bathroom cabinet has fallen off and is in need of desperate repair.

We are adding carpet to 3 bedrooms and we need someone to shave the bottom of 12 doors (3 bedrooms and 9 wardrobe doors). The doors have been removed and labeled. We need the doors cut onsite which can be done outside or in our garage and then rehung the same day. The house is in Essendon.

A kitchen cabinet door - perspex - about 114cm high (so a bit heavy and bulky) needs to be rehung on 3 existing hinges - we have the fixing screws. The cabinet is above a benchtop. There are two other kitchen cabinet doors where the hinges need adjusting and another hinge on a laundry cupboard that needs to be re-clipped.

I wish to fit a robo vacuum under kitchen sink cabinet. This would require cutting the existing shelves and giving support.

I need a clean circular hole cut into the side of this steel cupboard. I cut a rough hole in it myself to feed the washine machine hose through, but I need a cleaner hole cut in before I move out. The laundry cupboard has one of those slim stainless-steel laundry troughs with a storage cabinet underneath, next to the washing machine. The washing machine will be moved out of the apartment on Friday 7 Aug so I'd like someone to come on Saturday 8 Aug.

Definitely a job geared towards a cabinetmaker. Will need to cut out for a range hold, rail for finger pull, kick boards to be cut to size and scribed to the floor. The oven carcass will also need work with the rail.

Cabinet Modification for Full-Size Dishwasher Installation Looking for a cabinet maker or handyman to modify our existing kitchen cabinetry to fit a standard full-size dishwasher after our current dishdrawer finally died. The job: * modifying the existing cabinet e.g removal of shelf underneath DishDrawer *cutting the cabinetry and kickboard as required to create the opening for a full size or skinny dishwasher (full length) * Ensuring a neat, professional finish ready for dishwasher installation. Measurements are: H: 87cm (floor to black countertop, incl kickboard) W: 59cm (internal cabinet wall to cabinet wall and width of current dishdrawer) D: 56cm (measured to back wall of adjacent sink cupboard) Kickboard H: 10cm

I have a solid timber buffet cabinet that is approximately 5–10 mm too wide to fit into an alcove in my apartment. The cabinet body fits—the issue is the decorative timber moulding around the base. I’ve already started removing part of the moulding (see photos), but the timber is much harder than expected and I’d rather have someone with the right tools finish it cleanly. I’m looking for someone experienced with woodworking/cabinetry who can: * carefully trim/remove the required section of decorative moulding * keep the visible cabinet looking neat * test-fit the cabinet into the alcove * stop once it slides in cleanly The cabinet does not need to be rebuilt or repaired—only the moulding needs trimming. Please bring your own tools (oscillating multi-tool, planer, router, chisels, etc.—whatever you think is most appropriate). I’d love this completed today or tomorrow if possible. Photos attached.