Find experienced local carpenters in Carlton

Fill a short form and get free quotes from local carpenters in minutes

4.5

Excellent rating - 4.5/5 (9200+ reviews)

A range of carpentry for all your needs

  • Cabinet making
  • Custom shelving
  • Wood repair
  • Custom made furniture
  • Deck sanding
  • … or anything else
It only takes 2 minutes. And it’s free.
Up to 50% cheaper than franchise dealers
Up to 50% cheaper than franchise dealers
No job too big or too small
No job too big or too small
Free insurance coverage
Free insurance coverage
Secure cashless payments
Secure cashless payments
Same day / next day service available
Same day / next day service available

Best rated carpenters near me

Recent Carpentry reviews in Carlton

"If you want a job done properly, go with Matt. He went above and beyond to install my benchtop ensuring all cabinetry was level. He is a craftsman and a legend. Cheers Matt!"

Custom build and install laminate benchtop

$200

"Task as described "

Cabinet Maker

$100

"Michael provided an excellent service. He was on time and completed a difficult job quickly and efficiently. He had all the correct tools and was friendly and professional. I would highly recommend Michael. "

Affix shelving to alcoves.

$160

"Peter did a fabulous job with quick and precise communication, a friendly nature and yet always professional. Really appreciate your help with this task Peter, thank you! "

Restore outdoor timber dining table and benches

$600

"I would definitely recommend Gerard, he was very friendly, professional, and extremely efficient! The quality of his work is exceptional!"

Adding additional shelves to an existing closet.

$300

"Remon was the consummate professional. He kept persisting until he found a solution, and I’m very happy with the outcome. I wouldn’t hesitate to hire him again."

Built-in microwave

$100

What's the average cost of a carpenter in Carlton

$160 - $350

low

$160

median

$250

high

$350

Low, median and high bar chart distribuiton

Average reviews for Carpentry Services in Carlton

based on 24 reviews

5

24
0
0
0
0

What is Airtasker?

1

Post your task

Post your task

Tell us what you need, it's FREE to post.

2

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

3

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500
Airtasker has over 36 carpenters in Carlton, with an average rating of 5.0 stars from 24 reviews. Get in touch with carpenters such as Rajesh B, Damian D, and Ibrahim A today to get a wide variety of Carpentry jobs done.
Don't live in Carlton? We also have carpenters available in South Melbourne and Southbank available today.

Recent Carpentry tasks in Carlton

Assemble garden shed

$400

Carlton VIC, Australia

9th Nov 2022

Assemble a ABSCO bin cover ( model 2308WBCK) in to front garden - all parts have been unpacked in readiness, and I have all tools required, but I lack the time and skill . I estimate a skilled tradesman would take 4 hrs, a team of two would take 2 hrs ( preferred) - Due date: Needs to be done on Thursday, 10 November 2022

Excellent workmanship - fast accurate and considerate

Kitchen cabinet remodel to fit a dishwasher

$150

Carlton VIC, Australia

11th Sep 2022

I've bought a new dishwasher and I need my existing kitchen cabinet to be modified in order to fit it in. It is a standard 600mm cabinet with one shelf and one drawer. The shelf will need to be removed and the door of the drawer will need to be cut to length. The dishwasher is due to be installed on Friday September 16. I have taken pictures and measurements of my existing cabinet. (https://www.appliancesonline.com.au/public/manuals/DD60SCW9-Fisher---Paykel-Installation-Guide.pdf)

Carpenter/handyman needed to repair a timber window frame

$400

Carlton VIC 3053, Australia

8th Jun 2022

One of the timber frames for a small window on the property require fixing due to old age. Handy man, carpenter and or glazier will be required. - Due date: Flexible

Assemble DIY irrigation kit for small garden

$60

Carlton VIC, Australia

10th May 2022

Hi, I need help to assemble a DIY irrigation kit for a small garden. Supposedly have all the parts but it's beaten me!

Re-stain timber commercial building

$5

St Kilda East Victoria, Australie

31st Mar 2022

I would like to find reliable painter to re-stain the timber in a building please: - Roof top deck - Ground floor external timber structure I have all picture and measurements, material will be provided. I need labour it should take around 7-10 days my budget is 7000$

Restoration of a wooden table surface

$200

Carlton South VIC, Australia

9th Mar 2022

I would like to have the surface of this table sanded and restored. The table dimensions are: W: 90cm L: 213cm.

Caleb was brilliant! Great work and an even better person. I would recommend to anyone!

Repair a stain in floorboards. Price negotiable

$750

Carlton VIC, Australia

27th Jan 2022

Stain in floorboards needs repair. Have not had this done before so looking for comparison quotes

Cabinet maker/ joiner

$150

Carlton VIC, Australia

13th Oct 2022

New shop opening, I need a cabinetmaker or joiner who can assemble a flat pack counter and set of drawers. Can be any time of day, early or late. - Due date: Before Wednesday, 19 October 2022

Install Screen on Balcony

$1,100

Carlton VIC, Australia

6th Sep 2022

Install the wooden screen in the photo on the balcony. Balcony: 361 cm wide. Note: Wooden vertical pieces come separately and need to be attached/assembled Due date: Before Sunday, 18 September 2022

Install aluminum panels onto wall, remove stainless steel panels

$500

Carlton VIC, Australia

6th Jun 2022

Tear down 3 existing stainless steel panels from wall in commercial kitchen. Install three 2440x1220mm aluminum composite panels. Will likely need Glue Tec 7 and patting down with a mallet plus countersunk screws. Will provide materials needed. Must be done Monday 13 June, which is a public holiday. - Due date: Needs to be done on Monday, 13 June 2022

Need a carpenter or joiner to install kitchen cabinets.

$2,000

Carlton VIC 3053, Australia

16th Apr 2022

We are wanting kitchen cabinets installed and levelled. Approximately 7 upper cabinets and 9 base cabinets. Some plastering of walls also potentially needed. If you are able to provide an approximate quote or get in touch. - Due date: Flexible

Awesome job. So happy with the process and how the kitchen has come together. True luck in finding Frank and his team George and Joe at such short notice through airtasker. They were on the ball and such a great team to work with. My partner says true gentlemen. Problems and pressure points all discussed and solved effectively. Would highly recommend Frank to install your kitchen and we hope to hire them again in the future.

Need a cabinet maker or handyman

$200

Carlton, Victoria, Australia

26th Mar 2022

A small door and possibly one shelf under the kitchen bench. It had a mini fridge in that space and that space in now empty. Want to use it for storage. No pics - will try to post. Thank you.

This young man did not have any reviews. But very happy that he accepted the task. Talented cabinet maker. Very happy with the work. Took particular care of the aesthetics and matched the handles with the existing cabinet - had it looking just right. Would engage him again. Cleaned up after the work too.

Restoration of a wooden chair

$100

Carlton South VIC, Australia

23rd Feb 2022

I have a wooden chair that was damaged during transit and for which I require the top half of the back rest to be be reattached.

Frame build for outdoor bbq

$200

Carlton VIC, Australia

18th Nov 2022

Hello! We’re wanting the frame built please for an outdoor built in bbq bench. Approx 160cm wide x 80cm depth - Due date: Before Wednesday, 23 November 2022

Framework for a built in bbq area

$200

Carlton VIC, Australia

26th Sep 2022

Hello! e need the framework built please for a built it outdoor bbq, approx 1.5m x 0,5m - Due date: Before Monday, 3 October 2022

Deliver and install 4 pieces of ply onto a wall

$125

Carlton VIC, Australia

29th Jun 2022

Collect 4 x plywood sheets from Oakleigh South VIC 3167 and take to the Royal Exhibition Building in Carlton. Plus wood sheets to be drilled onto a small back wall for a stand for a trade fair. See attached images. The sheets sizes are 2 x 2.4m x 1m 2 x 2.4m x 0.5m The stand is small. Attached images. Thank you - Due date: Needs to be done on Tuesday, 26 July 2022

Build outdoor stairs or ramp for dogs

$1,200

Carlton VIC 3053, Australia

13th May 2022

My 11 year old dog has arthritis in his back hips and can no longer jump up the ~72cm into the raised garden bed. I would like a ramp or stairs built that meets the following reqs: *Made of materials that will survive being outside in sun and rain for many years. Would prefer pay extra and have a nicer timber than treated pine *free standing *Appropriately stable & sturdy. (Dog weighs 35 kg) *Gentle incline as he is already sometimes having trouble on regular human staircases. (~25 degree angle) I have seen companies selling prefab stair kits in Melbourne so if that is cost efficient then lets use one. - Due date: Flexible

Fix a broken floorboard in our shop

$50

Carlton VIC, Australia

7th Apr 2022

We have a cracked floorboard in our shop. I am no expert, but I believe the floorboards are made of pine and they are 14cm wide. Need someone to remove the broken part of the floorboard and replace it. I had it inspected by a professional floorboarder who said it would be an easy job for anyone with basic carpentry skills. - Due date: Flexible

Remove stain from uniform

$30

Carlton VIC 3053, Australia

14th Mar 2022

ink stains all over uniform - Due date: Before Thursday, 17 March 2022

Restoration of wooden table leg

$150

Carlton South VIC, Australia

23rd Feb 2022

I have a wooden table that needs one of the legs to be rejoined due a split in the wood that happened during transit. It also feels like it might require some support. I have tried to show the problems in the attached photos.