Find experienced local carpenters in Carlton North

I need assembly of an Ikea Pax and Platsa wardrobe. Please note I am somewhat flexible with the date but ideally this or the following Wednesday in the morning. The Pax is 2360 high and 2000mm wide and 600mm deep. See photos for interiors. It needs to be installed in a heritage designed house and we cannot remove the skirtings. This means that it will need to be fixed back to the wall with brackets - wall is masonry. LKQHN7 The Platsa is 2000mm wide, 1810mm high and 570mm deep. Again we cannot remove the skirtings but I understand Platsa can be installed over skirtings. Fixed back to a plasterboard stud wall. This is on first floor up a flight of stairs if this matters. LKQFJK - Due date: Needs to be done on Wednesday, 22 March 2023

Good day! I'm looking for someone who has a polisher for limestone—probably a sanding machine—to scrape the solidified acid stains on a kitchen benchtop. The area is around 2sqm. There are only a few spots to focus on. Will then need to apply a sealant after polishing but that's not required. Thank you in advance! - Due date: Flexible

We have 4 treatment rooms in our new massage business that need Ikea cabinetry installed. They are METOD kitchen cabinets of varying heights. There are 2-3 cupboards in each room. We have the ikea virtual plans for them and all the materials. A couple of pieces were missing when the order was made so you’d need to be familiar so that you could let us know what needs to be sourced. We need it done by the end of Feb and job can start from 15/2. - Due date: Flexible

Need some floating shelves to be made up to size and installed in the areas shown. The bottom shelf should be about 600mm deep to act as a desk to work from. There should be 5 in total on each side (4 shelves and 1 desk) Should be painted white satin Bottom desk can have a bracket to support it as it’s lower. The rest should use the metal dowels for support Brick walls - Due date: Before Friday, 24 February 2023

We need help building a very simple open wardrobe/clothing rack out of birch plywood, with 1x drawer and 1 shelf Similar to the one in the picture but just one rail and without the narrow rail section on the left hand side of the image. Measurements are: 93cm width 40cm depth 160-170cm height - Due date: Flexible

Small deck at rear of single story terrace home that needs to gaps with each boundary wall sealed and stained - Due date: Before Wednesday, 15 February 2023

Need someone to build a shed we have ordered. The shed is ABSCO SPACE SAVER SHED MODEL: 15081SK. Ideally today, but can be flexible with timing. - Due date: Flexible

Timber railing has rotten and needs to be replaced - Due date: Needs to be done on Sunday, 4 December 2022

Removal of cupboard and then putting new shelving for bookcase in cupboard space. Requires carpentry for shelving in the full length and space of the cupboard space. Shelving to be flush with chimney line. Any questions pls let me know. Open to discuss cost - Due date: Before Friday, 2 December 2022

It’s a shed that’s about 1.6m x 1m. It’s a giants shed model shd-flat-3x5. It’s tiny. There is plenty of space to put it together. I will place it after you finish - Due date: Before Friday, 30 September 2022

My garden has tree roots that have pushed the brick paving to be uneven. I would like a small floating deck built so I can put some garden furniture flat without everything being wobbly! - Due date: Flexible

Cutting/machining six millmetres from one side of 20 narrow, loose, boards, each 20mm thick, 38 mm wide & just under five feet long. (est: 30 minutes to one hour?) I guessed $100 but it may be more. - Due date: Flexible

The task is to install ikea kitchen cabinets on wall of kitchen and remove existing shelving and rangehood. We have the cabinets arriving on 15 June, so hoping they can be installed the following weekend. I've attached a picture of the existing wall and the cabinets we have bought that shows how we plan to have them on the wall. We have bought the brackets. I can send through further details if needed.

I have 2 wooden crates to be screwed onto the backyard fence. Will be used to hold pot plants and as steps for a cat. Will need own tools and fasteners and ensure they do not penetrate the other side of the fence on the neighbour’s side. Also need the removal of an old outdoor table. Must be fully insured and know what you are doing.

Looking for an experienced carpenter to install approx 6 skirting boards onto rendered brick walls - ranging from approx 100mm to 400mm. We can order materials, own tools required for installation including masonry drill. Happy to discuss in more detail for a more accurate quote, or can do an hourly rate.

Looking for a skilled cabinet maker who can remove this kitchen cabinet, possibly raise the height of the shelf and remove the cupboard doors. I need to make more space for the fridge. I posted this job late last year but we ran out of time before traveling to see family over Christmas. Due date: ASAP! Please give your availability.

Looking for someone who can remove this kitchen cabinet, possibly raise the height of the shelf and remove the cupboard doors. I need to make more space for the fridge. - Due date: Flexible

Need a skilled cabinetmaker to trim a cabinetry dishwasher cover to fit the new dishwasher. Also, our pantry door has broken, so need a cabinmaker to make a new door and hang it. - Due date: Flexible

Need high quality job for fitted Victorian wardrobe in 1 bedroom or a Victorian terrace I’d like to have them created as per below image

I purchased the wrong size melamine for a project. I need a few cm’s cut off a few different pieces of 16mm thick melamine