Find experienced local tradies in Box Hill NSW

i have 3 holes on the roof where the light points were taken out

I need the hole to be fixed and pained with no sign remained, I have the paint. The dimension of the hole is about 12x8cm more less.

Need a licensed electrician to set up power for a wall-mounted digital display (Cozyla 24” calendar, 12V DC / 3A / 36W) where an old HiLook intercom is being removed. Current situation: the intercom ran on a 12V DC supply with a spare Cat cable in the wall. That supply is only rated ~0.8A, so it’s too small for the new screen. Two possible approaches — happy for you to advise which is best on site: 1. Install a concealed power point (GPO) or fused spur in the wall cavity behind the screen so I can plug in the display’s own 12V adapter, or 2. If practical, trace and upgrade the existing 12V supply to a properly rated one. Either way, the wiring needs to be tidy and the outlet/adapter concealed behind the display. There’s an existing wall recess and cabling to work with.

Fix a hole in plasterboard roughly 10x10cm. Only filling is needed, I can do the final sanding and painting.

Need three power points to hang the tvs. Ones is downstairs. The other two upstairs with easy access to the roof.

I want to install 2 Awning outside on the brick.

Install 2 x Awning outside on the brick wall.

Hang round mirror weighing 25kg with an approximate dimension of 128x128cm to a gyprock wall.

Need to render the side of my alfresco. After the screeding and tiling was done - We need to render the side of the tiling to be flat and painted over. The length of the patch is about 7.5m and the thickness of it - is about 7-12cm

Square set gybrock following the installation of the sliding door. See photos

The wall broken and needs fixing in 3 diff places. Price is negotiable. Do not go by what is entered on the post.

Need to render wall outside 7m x70cm

Need to hang tv in room but power is kn the other side of room, there’s a man hole to access everything .

Hang up mirror on the wall - bring all necessary studs and equipment (20kg mirror)

Hi, I’m looking for a quote to repair a gyprock wall. There are several small outward bulges caused by impact (no cracks, paint intact). The house is about 4 years old. I can send photos. Location: Box Hill, NSW Thanks.

Professional Renderer required to some patching works. Material is present on site to match the existing paint.

The gyprock around stair case has cut to adjust the screws. Now the gyprock needs to be patched - one side is gyprock and the one portion of stair is blue board. I have both gyp and blue board pieces that can be used.

Few holes in the dry wall needs fixed.

Small damage to dry wall. Gyprock needs to fill

Need someone to patch and sand couple of small wall edges and some minor patching around the house