Book an affordable sliding door repair service in NSW

My bathroom sliding door won’t fully close - it will close 90% of the way, and then gets stuck and won’t move for the last 10%.

I’ve got an aluminium sliding door with a Doric locking system that isn’t closing or latching properly. The lock turns, but the hook doesn’t seem to line up with the striker plate, so the door won’t lock securely. What I think might be needed (but I’m open to advice): * Check alignment of the striker plate and lock * Adjust or re-seat the mechanism * Make sure the door is running square and closes smoothly * Replace parts if required (happy to cover parts separately) Photos attached for reference. Looking for someone who has experience with sliding door locks, particularly aluminium doors with Doric hardware.

I have a bathroom pocket/cavity sliding door that has come off its overhead track (see photos). I've tried to re-seat it myself without success. There's a wooden trim piece running along the side of the track mechanism that appears to be glued (not just screwed) to the door frame — I attempted to remove the screws but the trim won't budge, which is likely blocking access to the roller/track assembly. This might be a quick fix for someone experienced with sliding/cavity doors, but could also need a bit of carpentry work if the trim has to be carefully freed or replaced. Happy to increase the budget after an onsite look if more work is required. What's needed: -- Assess why the door has come off the track -- Free/remove the glued trim piece without damaging the frame (if needed) -- Re-hang the door and adjust rollers so it slides smoothly Reinstall or replace trim as needed Photos attached showing the door, the track mechanism, and the trim piece.

Have an internal sliding door has come off runner

We have 2 sliding doors that did not sliding properly. One of them is the toilet door which got some rack damage. While another door might be the problem with the upper track issue. I would need this fix before the new paint can be done. Please refer to the photo attached. Prefer on weekend or in the morning/evening on weekday.

Bathroom has a wooden sliding door. Need to replace track so it can move freely

Sliding Door Repair Sliding cavity door has come off its track. The door became stuck and had to be moved, causing it to come out of place. Looking for someone experienced with cavity sliding doors to: * Reinstall the door into the track * Replace rollers or hardware if required * Ensure the door slides smoothly again Photos attached. Please quote including any parts if needed.

Sliding door is working but it is getting stuck from one side towards the back after closing it

One sliding window is a little stiff but can still open. May be others once there is a inspection on the other windows

3 stack sliding door, the first stack doesnt slide properly ,gams

Replace Wheels on 3 Sliding built in wardrobes(6 Doors Total) Task Description I need someone to repair the sliding mechanism on three built-in wardrobes. The roller doors are currently stiff and not sliding well, so they need new wheels and materials to slide smoothly again. Here are the specific job requirements: • Fix three built-in wardrobes with two doors each, totaling six sliding doors. • Remove the doors and replace all existing wheels or rollers with new ones. • Clean and check the tracks to ensure the new hardware glides perfectly. • Provide an all-inclusive quote that covers both your labor and the cost of the replacement wheels for all 3 built ins.

I have 3 built in wardrobes, the roller doors are not sliding well. Need new wheels so that they slide better

Sliding bathroom door, runner is broken and comes off track

Fix my sliding door as it doesn’t slide smoothly needs wheel replacement on one side and the top glass is loose from the frame.

Bathroom door has came off the tracks still moves back and forth but the slide is stuff. Door has got moisture in at the bottom will need about 10mm taken off

Sliding door is jamming and getting stuck at certain points. Have tried to lift onto slider but failing. Need someone who can put it back on slider. No signs of visible damage but I’m not familiar with these things.

Need someone to put the door back on will need to take off one of the exterior aluminium frames prior as it won’t fit through. Square screw fitting required.

The sliding door needs fixing of my bathroom. It has come off rails

Need a handyman to fix our Double sliding doors, 1 has come off and rollers have fallen out. Other door works ok but is a bit tight at the end when closing. Both doors need servicing so they work well. I think I have the parts here- 2 sets of 2 rollers

The sliding door doesn’t roll well. It gets stuck and requires weight to move it all of the way. It could be the wheels or the track, I’m not sure. The door is also seems a little difficult to get out of the frame, I can’t manage to do it.