Find experienced local roofers in Stanmore NSW

Quote for Cladding, capping and flashing to finish and installation of gutters.

We are trying to secure our courtyard from an escaping cat. We have all the equipment needed however it is probably best if the person has their own drill. We need someone to drill holes in aluminum sheet and capping and rivet connections. We estimate 1-2 hours work.

Just help with taking down curtains from a roof mounted track that is 3.6m

I need gutter cleaned for a two storey house.

Need a reliable professional to clean all gutters on a single-storey house. The building inspection identified blocked gutters, so I want a thorough clean and quick visual check of the roof edges. What I need: • Remove all debris from gutters • Clear downpipes • Take photos before and after cleaning • Let me know if you see any rusted sections, lifting sheets, or damaged areas • Dispose of debris (or leave in green bin if easier) Access: Easy access around the house. Standard ladder height is fine.

Need someone that can work on terrace roof grinding down parapets so they can be painted may need two for the day

2 bathrooms- width total is 3.5m and length is 2.1m.

i need a corrugated roof replaced on a backyard shed

Hi, We would need to: 1.Re-seal one leaking join in a gutter. 2.remove & replace a rusted rainwater head.

Existing gutter in Stanmore requires bracing. Can access roof via dormer window on top floor. Roof is quite flat. If meeting on a weekend, I can be there at any time to assist access so that job is completed quickly.

Need an experienced and reliable builder / handyman to: - remove existing awning (frame only) - install a new awning (same size 1200x700) on the roof to protect rain from getting into roof access) - seal all gaps and ensure the new awning is securely mounted to avoid damage due to strong wind - clean up the area upon completion The new awning will be provided (as per photo below) and I will be available to help as instructed during the installation (if required). Work to be done during weekends.

Request for Mitsubishi Split A/C Outdoor Unit Relocation The outdoor unit of a Mitsubishi split A/C system needs to be relocated from its current position on the garage’s outside wall to the roof, directly above its current location (approximately a 1-meter move). Scope of Work: Relocate only the outdoor unit - including provide roof brackets. Patch the existing wall opening (no full repair required). Disconnect and reconnect refrigerant lines, including proper evacuation and recharging with (original) refrigerant as needed. Rewire and ensure all electrical connections comply with safety standards. Pressure test, vacuum, and conduct a full system test to verify proper operation. I will be present during the task to assist if required. - Due date: Flexible

1)Re-hang 10m of guttering along one side of house to correct slope, so water flows to down pipe AND 2) fix break in down pipe. The gutter is approx 3.9m above ground.

I need a chimney stack of bricks in the roof cavity removed. Will need to be removed using a hammer and by hand.

This unit needs to be moved from the outdoor wall to the roof. - Due date: Flexible

Clear the gutters for a 3 bedroom cottage which is 1 storey high at the front and 2 stories high at the rear.

Roof gutter cleaning removing leaves and other dirt

Water infiltration into subfloor.

Need a small piece of grey sandstone (approx 20cm X 20cm X 13cm) to be supplied and inserted in a road gutter (around a sewerage pipe) to match existing gutter to meet DA approval. The existing concrete will be removed prior.

Remove an old waterproofing strip on the side of a building for about 5 metres. It is peeling off easily. Vacuum and clean the crack between footpath and building and apply a waterproofing ACRYLMERIC SILICONE WATER REPELLENT and waterproof stretchy silicone.