Find an experienced plumber in Balwyn North

I need a licensed plumber to remove my existing top-mounted kitchen sink and mixer tap and install a new sink and tap, which I will supply. The job includes: Remove the existing double-bowl sink and tap Install and securely seal the new sink Install the new mixer tap Reconnect the hot and cold water and waste plumbing, including any minor adjustments or fittings required Test everything and ensure there are no leaks Remove and dispose of the old sink and tap The benchtop is black stone and the existing cut-out may need to be enlarged or shaved slightly to fit the new sink. Please only offer if you have suitable stone-cutting equipment and can undertake this safely, using proper dust extraction or water suppression. Photos of the existing sink, benchtop and plumbing underneath are attached. I will also provide the new sink dimensions and cut-out template. Please confirm in your offer: That you’re a licensed plumber Whether your price includes any required cut-out adjustment Whether removal of the old sink and standard fittings/consumables are included Located in Balwyn North. Preferebce for Friday 24th in afternoon or Saturday 25th July

I’m looking for a licensed plumber or experienced handyman to repair a leaking bathroom tap. Issue: * Wall-mounted bathroom bathtub tap. * The tap does not leak when turned off. * Water leaks from around the tap handle/body when the tap is switched on. * It is likely a worn O-ring, spindle seal, or tap cartridge, but please diagnose and repair as needed. * Please bring any common replacement parts if possible. See the attached photo for the tap style. Preferred Time: Flexible – anytime in the next few days. Please Include: * Estimated cost of parts (if required)

My water company called me and said that we may have a water leak. I need a plumber who can help find whether there is a leak, and if yes where the leak is.

I need a leak fixed under kitchen sink

I need someone to reconnect a washing machine inlet hose from the current tap to the cold water tap. The washing machine hose appears to have been connected to the hot water tap instead of the cold tap. I tried to loosen the plastic connector but it is very tight, and I do not want to force it and risk damaging the tap or pipework. The job is under the laundry cabinet. It should be quick for someone experienced with washing machine connections or basic plumbing. Please bring suitable tools/grips and check for leaks after reconnecting.

I have an outdoor Rheem gas storage hot water system (approximately 9 years old). For the past few weeks, all hot water taps in the house have only been producing lukewarm water. The gas cooktop is working normally, so the gas supply appears to be fine. Looking for a licensed plumber/gasfitter to inspect and repair the system. Please advise if you can diagnose the issue and provide a quote for repair.

Installation the toilet , sealed with grey silicone. Just 15 minutes could finished the job

The the drain blocked, and the toilet water come out. By the way , when you finished the job, the toilet drain still blocked, I won’t pay, because this is the second time, I put the offer on airtask

Kitchen tap has very low water pressure on both hot and cold. Brand new tap already installed, so the issue is not the tap. Both isolation valves under the sink seem faulty and spin freely. Need a plumber to inspect and replace the valves. Balwyn North.

Looking for a VBA licensed plumber to alter existing residential pipework. I need our water meter moved just under 60cm so that it sits closer to our front fence line.As part of this job, the existing garden tap needs to be separated from the main meter assembly, piped over, and securely mounted flush directly onto the fence line itself.Job details:Distance: Under 60cm shift for the meter, bringing it closer to the fence.Tap placement: Extended and mounted flush onto the adjacent fence.Ground type: Soft garden soil / dirt only. Very easy, straightforward dig with a standard spade. No concrete, asphalt, or pavers to cut through.Scope: Turn off water main, dig out soft soil to expose current pipework, extend/modify pipe, relocate the meter closer to the fence, run a separate line to mount the tap on the fence, and leak test. I am happy to shovel the dirt back into the trench myself once you are done.Photos: Attached photos show the current meter setup, the fence line, and the target location.m Requirements: Must be a VBA licensed plumber (please provide your license number with your offer).Must bring all own tools, pipe fittings, and wall/fence mounting brackets.

I need my fixed dishwasher moved to get behind it then moved back again and fixed. Also need my heat pump dryer moved so can get to back and swap to internal drainage

The drain pipes are blocked , the toilet refresh was slow, and the out side check point has some water running to the ground

Hi, I need someone to attend the property and fix the shower floor waste/drain area. Scope * Supply and install a new suitable floor waste cap/grate if required * Check the shower drain to make sure there is no blockage (no overflow at the moment, might be a bit hair in the drain) * Clear any minor blockage if found * Clean the area after the job is completed The shower drain cap/grate was damaged. Please bring suitable replacement. Please quote including labour and any standard floor waste cap/grate. Extra parts can be discussed before installation.

Need a licensed plumber to fix a leaking bathroom basin tap at a rental property. Tap is a Dorf Kytin quarter-turn twin lever basin. The replacement part required is the Easytap TZ2052CON spindle, listed as suitable for this tap. https://plumbingsales.com.au/easy-tap-tz2052con-spindles.html Price is for the full job including: - Liaise with rental agent to arrange access - Supply & replace both tap spindles (x2 Easytap TZ2052CON) - Disposal of old spindles - Test for correct operation upon completion of works Looking to have this done within the next 1–2 weeks.

Hi, I need an experienced plumber or handy person to install a Norris Glassmate commercial glasswasher in my bar area. Tasks include: Plumbing: Connect the water inlet hose and drain hose to the existing plumbing system under the sink (next to the Rinnai hot water tank, as shown in photos). Cabinet Modification: You will likely need to drill/cut a hole through the side panel of the wooden cabinet to feed the hoses and power cord through. Power & Testing: Plug the machine into the power outlet and run a quick test cycle to ensure there are no leaks and it operates correctly. Please bring your own tools, including a hole saw for the cabinet and plumbing tools. If any minor plumbing splitters/extensions are needed, I can reimburse you based on receipts, or please let me know in advance. Please see the attached photos of the machine connections and the installation site under the sink. Looking forward to your offers!

Was trying to make replace tap plastic cover as old one broke, think I broke the spindle and now water won’t stop running (when water on) and can’t screw parts either way. Need this fixed and new plastic cover replaced. Available after 11am

We have a leaking faucet in our bathroom. The tap is not shutting off fully, and there is a constant drip even when turned off. We need help to fix/replace the washer or tap mechanism if needed.

I have a blocked toilet. I tried to plunger it but no success, tried with a plunger and with a mop. The toilet is on the second level of the residential house.

Replace an existing shower head with a new one very basic single arm Unblock toilet

Toilet leaking from the waste pipe (Flange???) it doesn't go into the floor but comes off from the side of the toilet and into the wall. The join from the porcelain to the PVC pipe is where the leak is, I believe it just needs to be re sealed with silicon.