Find a professional kitchen sink installation service in VIC

Under kitchen sink to be removed and install new shelf and middle shelf. Possibly check for any pipe leaks.

kitchen tap is broken and there is a small leak at the bottom of the sink

Loose faucet base in kitchen

Need help with replacing a kitchen sink & mixer

Unblocking kitchen sink pipe/drainage. I’m not able to run the water in my kitchen sink for very long before the drain blocks up and starts to overflow. When I run my dishwasher, the sink also overflows and is pretty gross.

The plumbing under the kitchen sink need to be redone. Recently bought my first home. The plumbing under the kitchen sink is a home job and is leaking at a T junction. Need it to be redone. Leaking from the cold water not the hot.

My kitchen sink tap has become loose and needs to tightened at the bench top.

1. Plumber to disconnect old gas stove & kitchen sink this coming Friday. 2. Then Install new sink and tapware on new bench installed by chippy on Saturday (while chippy will be installing cab/bench for new stove and oven. 3. Reconnect gas to new stove once stove is installed.

I need a licensed plumber to remove my existing kitchen sink mixer (see photos) and install a new Caroma Elements Husk Sink Mixer (brand new in box). The current mixer is a square chrome tap, and the new one is a gooseneck retractable spray tap. Access under the sink is good (see last photo). Hot and cold flex hoses are visible and accessible. ⸻ Details: • Location: Bentleigh, VIC • Task: Remove old tap and install new Caroma Husk sink mixer • Requirements: Licensed plumber • Preferred Date/Time: Flexible, ideally this week or weekend • Parking: Easy on-site parking available

Need to fix the leaking under kitchen sink and bathroom....i have attached the photos.. Please give ur quote...its in wyndham vale..

Hi, We would like this tap installed into our kitchen sink https://www.reece.com.au/product/mizu-drift-pull-out-gooseneck-sink-mixer-curve-2-2265803? query=Mizu

Existing kitchen sink tap needs to be replaced with the new one.

The kitchen pull-out sink mixer was installed recently; however, it is missing few bits such as the base and O-ring (see attached photos). I have the parts, just need them installed.

The hose from my kitchen sink is broken when it’s on the hot water it works but when I turn into cold water, it starts a leak and nearly flooded my kitchen

I have purchased a water filter https://bwtaustralia.com.au/product-items/bestmax-premium/ With this head unit, https://www.bwt-wam.com/en/products/connection-technology/bwt-besthead/ I’ve connected it with some push fit connectors to step down from 1/2” to 3/8” and back up, but I seem to be getting a leak here where the it steps back up to 1/2. The leak is not as bad as pictured in the photo. I added teflon tape which helps, but there is still a very small leak. I feel as though I’m pretty close, but also happy for someone to overhaul the plastic push fit for braided stainless steel and brass connections which might actually be a better fit.

The The metal plug/strainer assembly (the part that sits in the sink hole and acts as both a filter and a push-down stopper) has detached from the drain pipe beneath the sink. It appears the issue is a missing nut or fastener. I can see the thread/bolt from the plug assembly hanging down below the sink, and I can see the pipe with the corresponding hole, but the piece that secures them together is gone. How to Fix It (As I See It) This should be a straightforward job for someone with basic tools and confidence: Obtain a suitable nut/fastener to fit the existing bolt/thread. Unscrew/detach the immediate section of the drain pipe below the sink Properly seat and secure the metal plug assembly onto the sink hole from above. Fasten it securely to the pipe thread from below using the new nut. Reattach the rest of the drain pipe and ensure everything is tight and sealed (a quick water test would be ideal). I believe this is a simple handyman or maintenance fix and does not require a licensed plumber. I just want someone confident to do the job properly so I don't have leaks.

Current kitchen sink mixer faulty . Needs to be removed and replaced with new tap. (Already purchased). Will be a quick job for experienced plumber.

Need to swap a kitchen sink . It would need cutting the board a bit for adjustment . The current sink is 1.06m * 0.48m . It’s wooden board top . The new sink is 1080mm * 500mm. See photos .

Remove and replace caulking around kitchen sink and benchtop. The existing caulking has deteriorated and has areas of mildew - looking to replace it with an anti mould silicone caulk.

Kitchen sink leaks underneath - need fixing or tightening. Please send your offer