Find a professional gate installation in Malvern VIC

A trench 550 mm deep to take an electric cable from the house to the electric gate. 6 meters long

Replace Front Picket Fence & Install Gate – Malvern Location: Malvern, VIC Job Type: Supply & install front picket fence + single gate Budget: Open to quotes Scope of Works I’m looking for an experienced fencing contractor to remove and replace the existing front fence with a new timber picket fence, including a pedestrian gate. Fence details: • Approx. 5.4 metres along street frontage • 2 metres high timber picket fence • 3-rail construction • Includes 200 x 50 timber sleeper at base (thicker sleeper required as plinth) • Posts to be installed behind the sleeper • Fence to be installed in concrete footings Gate: • 1 x single pedestrian gate • Steel frame • Steel latch post • Gate hinged off fence post (left side) Other details: • Letterbox will be supplied by owner, contractor to install (TBC) • Fence line is clear, however any trees/plants to be cleared prior by owner • Existing fence will need to be demolished and removed • There is concrete at the fence line – breaking concrete may be required (please note if this is included/excluded in your quote) What I’m Looking For • Experience with timber picket fences • Ability to supply materials or work with supplied materials (please specify) • Clean, professional finish suitable for a front façade / street appeal

The metal part that connects the gate to the post has snapped.

Fitting of gate lock to front gate. Please see attached pictures. Some cutting of wood panelling and drilling will be required to fit the device.

Re-attach gate blown off in the wind and attached latch.

Looking for someone to build a gate down the side on the house. 1.8m neigh and 1.5m wide.

Replace broken hinges on metal gate frame as per attached photos. Quote should cover cost of new replacement hinges if needed.

Require a tv tilting wall mount in a room to be installed and a retractable baby gate to be installed at the bottom of the stairs.

Need to cut 1 inch off the bottom of our paling gate so that it does not scrape against the ground. Needs to be done neatly without splinters/cracking. Also minor repair to re-screw in gate latch so that it closes cleanly.

Gate continues to slip causing lock and latch to be misaligned.

LOOKING FOR QUOTES (work done in a couple of weeks) Supply and install new side gate with walls with top to protect gate and timber walls. Remove old broken timber sides and gate from side of house. Build new timber frame with timber paneling on side of house and on side of fence. Build new gate, gate to be a metal frame with with same style timber paneling on it. Fit new lockable door handle on gate. Lock to be a key lock. All timber to be treated pine and timber paneling will have a primer over it. Get frame secure to house and fence. Dimensions Fence 150cm W, 205cm H. Standard size door (190*85cm)

Side gate post needs adjustment. Potentially remove and replace postz Side post has shifted which causes issue with gate latch - Due date: Needs to be done on Tuesday, 6 February 2024

The fence and gate/door between the house and fence needs to replaced. Looking for quotes for labour and parts

The brick fence that the iron fence is bolted to has moved slightly so that now the gate doesn't close properly and doesn't lock. I've had a look and I think the easiest fix would be to remove the old bolts, place spacers between the iron fence and the brick wall, adjust so that the gate closes properly and can be locked and insert new bolts.

Require a new side gate and lock to side enterence. Wiring is out to gate but the gate will need a stricker plate.

Metal gate no longer closes. It hits the upright.

Side gate post needs adjustment Side post has shifted which causes issue with gate latch. It is now off centre. - ASAP

Replace the latch on my front gate

We have a fence at our house and want to convert part of the existing fence into a gate with a lock in it. On the other side of our house is a park. We have no materials/equipment. There is a mitre 10 near us so once you see the fence and start the job you could source a lock from there. I’ve added picture of: 1. Our fence from the house side 2. Our fence from the park side 3. Our neighbours fence WITH a gate (we would like the same style) Available any time over the coming days if that suits

Hello, needing help installing a child security gate by the staircase, thanks.