Find professional garden shed repair in NSW

Need to assemble garden shed…no need to drill..its easy shed assembly

Need to install garden shed at back of the house

Need to built a garden shed 3x3 size. The base need to be concereted. Shed will be provided. Also need to assemble and install it.

Construct EasyShed flat packed small garden shed and install on pre laid concrete slabs

Construction of a small garden shed 2x2m

I need a 6m x 3m Garden Shed erected on an existing concrete slab.

Removal of old 2 x 2 garden shed and the 2 x 2 concrete slab made larger to accommodate a standard 2.5 x 2.5 garden shed.

Looking for someone experienced to assemble a Plantcraft Steel Garden Shed in my backyard. Shed details: • Size: 2.38m (W) x 1.31m (D) x 1.82m (H) • Colour: Black • Material: Steel • Brand new in packaging Job requirements: • Full assembly of the shed • Ensure it is level, secure, and properly installed • Experience with flat-pack sheds or similar structures preferred • Must bring your own tools

Dismantle and dispose of metal shed Approximately 1.5 m wide x 2 m high

Looking for someone to assemble a small flat-pack metal garden shed (robot lawn mower shelter). Approx size: 97cm (L) x 92cm (W) x 63cm (H) All parts and instructions provided Needs to be assembled outdoors in backyard Ground is flat and ready This is a small unit but has multiple panels and screws, so experience with similar sheds or flat-pack builds is preferred. Requirements: Must bring your own tools (drill, screwdriver, etc.) Experience assembling metal sheds or flat-pack items Take care to align panels properly and ensure it’s sturdy

Remove old garden shed and Install a new shed in the backyard

Garden shed demolition of a small old shed Take away all rubbish including the whole old shed Take away all rubbish inside the old shed so that is nothing left behind We need someone that will be careful with rubbish removal as we just refurbished the entire pathway in the front yard we do not want this damaged please

Garden shed double doors need fixing. The doors are not fitting properly and are currently not bolted in place. It’s a double-door shed and we already have all the tools required for the job. Looking for someone who can come and properly align and secure the doors.

We need garden shed to be built outside on concrete slab the shed model is below https://easyshed.com.au/products/gable-slider-garden-shed-3m-w-x-1-5m-d-classic?srsltid=AfmBOoonZ7TO7KCFBGCG3uULE4_1p_-ZKGR5XqklQlz62MJHwjNcKj6S

Task Description: Looking for a reliable person to assemble a new Keter Darwin 6x4 plastic garden shed. The work is located in. Video : http://www.youtube.com/watch?v=dfq4rz80Mgg Key Requirements & Steps (Detailed Scope of Work): Step 1: Land Preparation (Critical): Step 2: Shed Base Assembly: Connect the two-part plastic base and secure it with the initial screws once the ground is level. Step 3: Panel Installation: Slot in the ~20 plastic panels, including corners and back pieces. Step 4: Roof Assembly: Assemble the two-piece roof with the strengthening bar and center joining strip. This part requires perseverance and detail to ensure it is watertight. Step 5: Door & Hardware: Install the two doors, including the hinges and the locking mechanism, which can be a bit fiddly and requires manual assembly. Correct ground leveling is essential to prevent doors from misaligning. Step 6: Fixings: There are hundreds of screws involved in this build to fully secure the joints and the base. Keter Storage Shed Shelf Kit × 1 needs to be installed inside at the end Tools Needed: Shovel/Rake/Levelling tool (for land prep). Electric Drill/Driver (highly recommended due to the large number of screws). A ladder for reaching the roof panels. Additional Details: Location: [ Austral/Sydney NSW 2179] Timing: Flexible, but would prefer completion in a single session, given the sequential nature of the ground-to-shed build. Pro-tip from the video for the Tasker: If you find the hinge holes difficult to line up, try driving a "pilot" screw in and back out first to clear the path. Please also ensure the outer door trims are perfectly aligned so the doors shut correctly.

Put up a new garden shed up

Looking for experienced, reliable Taskers to assemble a large garden shed approximately 3.62m Wide x 3.57m Deep x 1.95m High This is definitely a two-person job. Details: • All shed components are on site • Instructions included • Brand/model: stratco handy mate • Location: Blackheath • Base: concrete slab Scope of work: • Full assembly of shed (walls, roof, doors) • Ensure structure is square and level • Secure/anchor to base • Clean up and remove packaging Requirements: • Must have experience assembling larger sheds • Must bring own tools • Attention to detail is important – want it done properly and securely Please quote a flat rate for the full job. Flexible with dates but would like completed within the next week.

Dismantle and remove garden shed and contents. Access via side gate. Located in Nowra

Need 2 garden sheds assembled tomm (between 1030am and 1pm) It’s a 2 person job (I will be around moving stuff - so can lend a hand to position panels)

I have a small metal garden shed that needs building. Its 0.72mW x 2.1mD x 1.8mW. It has full instructions and a build video.