Find an experienced flooring expert in Sydney Eastern Suburbs

Install 35-40sqm of click-lock hybrid flooring into 1 open plan room

1. Project Overview Seeking a qualified flooring installer (licensed and insured) to supply and install engineered timber flooring (floating method) across approximately 75 square metres in a commercial strata office in Sydney CBD. Removal and disposal existing carpet. 2. Flooring Product - Product Type: Engineered European Oak Timber - Brand: e.g. Plank Floors – Auber - https://plankfloors.com.au/wp-content/uploads/2022/11/auber-spec-sheet_2022.pdf - Dimensions: 1900mm (L) x 190mm (W) x 15mm (T) - Wear Layer: 4mm - Installation Method: Floating (tongue & groove) over underlay. 3. Site Details - Location: Sydney CBD - Total Area: 75 sqm (across open plan area and boardroom) - Subfloor Type: Concrete slab - Access: Lift access - Furniture/Prep: Site will be cleared prior to install 4. Installation Requirements - Underlay: Provide and install suitable acoustic underlay such as REGUPOL 3mm: https://acoustics.regupol.com.au/products/range/regupol-sonus-multi/regupol-sonus-multi-3/ - Expansion Gap: Leave appropriate expansion gaps along walls/skirting - Trims/Scotia: Include supply and installation of matching trims/scotia as needed - Doors: Undercut doors and jambs as required for clean finish (only 2 doors) - Direction: Lay boards lengthwise down the main axis of the space (unless otherwise advised) 5. Other - Removal and disposal of of existing carpet required All boards and underlay at owners cost.

Lay wooden floors in my apartment

Lay a large mat on top of an existing carpet and stick it down with tape, which I have. Moving light furniture involved.

Install 2 x vinyl stickers. They are in a square format (2m x 2m). Temporary sticker, applied from the outside.

Install approx 50 square metres laminate. 2 bedrooms 1 living room/kitchen Including removal of old laminate (we can use the building’s skip bin as there is currently remedial works on the facade)

We need someone to rip up the carpet (and dispose of it) and install floor boards from Carpet Court in the living area of the apartment. Not the bedrooms, kitchen or bathroom. Please provide a quote.

45sqr area wood laying for granny flat.The wood does not require underlay and thr place is new & flar. Materials are extra. Ready to start any time and we can provide one supporting person ( dimention 1545 x 182 x x5 mm + 1.5EVA Hendrik. It is one bed room with bathroom and dining kitchen combined. One room studio !

3 rooms. One common area. 2 sets of stairs. Remove carpet and install floorboards to all.

We have new flooring to lay. There is existing flooring laid above hardwood floor. We will need to remove the existing and replace with new. Dimensions of new boards: 20cm W, 2cm H, 200cm L (tbc). Approx 140m square total floor space - see floor plan attached. New flooring is wooden tiles. Photos tbc.

I would like someone to lay Floor boards down. Floor Select 8mm 2.13m² Elysian Oak Bevel Edge Supr Laminate on loungeroom floor please. 6.82m x 3.8m is the area of the loungeroom..

Looking for someone experienced in installing floating laminate flooring using the Uniclic system to help with a flooring project in my apartment. Details: ✅ Location: Paddington 2021 ✅ Flooring Area: Approx. 25m² ✅ Flooring Type: Floating laminate with Uniclic installation system (easy to install) ✅ Furniture: The apartment is furnished, so furniture will need to be moved around during the install. I’m happy to help shuffle things as you go or move items into different spaces to make the process easier. Requirements: • Experience with laminate flooring installation (preferably using the Uniclic system) • Own tools and equipment for cutting and fitting the flooring • Ability to work around furniture without needing the entire space cleared • Reliable and efficient with attention to detail Would love someone who can get this done efficiently and neatly. Please let me know your availability, experience, and quote. Thanks!

Hybrid flooring installation for hall way area (5sqm), 1 door shaving required. Materials including scotia and trims all provided

Theres 5sqm of laminate that needs to be installed for the under stair area of my apartment. Also the scotias for the rest of the apartment (47sqm) havent been installed, so need that done. For one area will need to carve the scotia to allow a wire to pass vertically upward. See photos

Need someone to install floorboards into my 3 bedroom apartment I already have bought the floorboards they are the ones without any adhesive just the click in ones you will need your own tools as I have got all the floor boards

Lay 130x19mm Blackbutt floorboards to 83m2 Sand floor boards and seal with water based sealant then finish with semi-gloss You will be laying 60% over existing pine timber floorboards, 35% over new yellow tongue and the residual over existing tile/concrete

Small concrete floor understairs storage room. I have the floorboards and underlay but need person to install and have tools to cut floorboards when required. If left over floorboards ,will pay same again to lay in another room

Lay approx 45m5 timber floorboards Timber will need to be glued and nailed - 90% over existing hardwood floors, remainder over small tiled area Approx 1m2 will also need levelling/underpinning Approx 5m2 needs raising to be same level as rest of floor so will need timbers and yellow tongue or similar

Lay 35 square meters of hybid laminate flooring planks over tiles in a kitchen area

I'm hosting an event on Sat evening. I wish to move furniture from my living room downstairs to my garage. Then lay carpet tiles on living room floor (I already have the carpet tiles) and assemble a dancefloor (I have this as well). Not a large area - about 40 sqm. At least a two-person job. Do not apply for the job if you are not a two-person team (or more). Probably suite removalist type work.

I need floor boards sanded back and polished. The room is approx 10m by 5m

Sanding ,polishing,seal of 75m2 floorboards with satin water-based finish. This is the hallway/living and bedrooms. And 11m2 pull up vinyl tiles and refit with hybrid floorboards. The 11mr is over 2 area- the sunroom and small kitchen. Preferred start next week.

Need someone to clean a timber floor in a small restaurant

Sand and fix floorboards. Then polish. Minimum dust

Wooden floor polished and refurbished.

Real Timber Floorboards sanding and polish.

Approx 35sqm. See photos

Hi All, I’m looking to get some old carpet torn up and removed with floorboards polished to match the living room.

Need to sand back wooden floorboards and repolish as a result of dog urine stains

Sanding and polishing parquet flooring 1 bedroom apartment

Need a floor polishing in Matraville. Flexible on dates but needs to be before the 4th of December. Please send pictures of previous jobs you have done.

Remove carpet Stain floorboard underneath Polish 2 bedrooms of 6x4m and 3x4m Floorboards are in good condition - photo of room prior to carpet being laid included Also photo of floorboards on level below to show desired look to match

Sand and polish hardwood floors Level 5 apartment access by lift Floorplan attached for sq m size. Floorboards are only in lounge/kitchen and bedroom, not bathroom.

Sand back and then polish these floorboards . Wanting to lighten them as much as possible. May need a few coats of polish. Sanding must be done on a weekend and polishing must be done on the following weekend. You must have your own supplies and tools.

I’d need help with polishing a 280 x 35 cm area of my wooden floor to match with the rest of the floor (per picture).

Hi there, we need a small area of flooring to be sanded and polished to get rid of circular mark scuffing from a desk chair on the flooring. Thanks, Dev.

Sand and polish floor boards (90sqm in total

Polish the hardwood floor

Sand and polish wooden floor boards One room 3.4m by 4m

Wax and polish wood floorboards main living space and corridor

Remove wall-to-wall carpet and sand, finish, varnish wooden floors underneath. Two rooms (connected)

We have old lino floors in our kitchen which we want to remove and get back to the wood floor underneath. There is a rubber underlay under the lino which is stuck down. We aren’t removing our kitchen cabinets etc, so it’s really only a 12-15m2 space that needs to be completed. The floor will need to be sanded and refinished. I’ve also included a picture of another room where we had the floor refinished. The wood in the kitchen is the same as this.

We are re-doing our kitchen and have removed the floor tiles. There is original timber flooring through most of the kitchen, with some protruding nails. There is a small area (2sqm) with no existing flooring, but there are structural beam supports. Total kitchen area is approx 2mx4m. Looking for someone to sand and refinish the existing timber floors, and patch the existing hole in the floor. Open to suggestions around materials for the patch - could be laminate or timber - to match existing floor as much as possible. - Due date: Before Tuesday, 8 November 2022