Find an experienced flooring expert in Clayton VIC

I’m looking for an experienced flooring installer to install both hardwood flooring and SPC flooring at a residential property. Scope of works: 1️⃣ Hardwood Flooring Area: approx. 60 m² Stairs: 12 steps + 6 winders - manufacturer supplied nose but need to trim to size Board size: 910 x 125 x 18 mm 2️⃣ SPC Flooring Area: approx. 85 m² Board size: 230 x 1570 x 8 mm - Click and lock system Underlayment required to be installed underneath Stairs: 23 steps + 9 winders - Glue with edge trims - Tx t m0b more detailed O4️⃣ O2 Peter 5️⃣🎱6 Yu 92🎱 Installation areas: Ground floor – concrete slab Stairs - steps and winders (where the stairs turn) First floor – floorboards Materials: - Flooring materials and underlayment supplied by owner. - Installer to supply own tools, fixings, adhesives, and consumables Location: - Clayton - Price for reference only. Negotiable cash please. Requirements: - Proven experience with hardwood flooring and SPC flooring installations - Ability to prepare subfloors properly (levelling, moisture checks if required) - Attention to detail for clean cuts, transitions, and finishes - Trim out flooring if corner is not good - Reliable, punctual, and professional Timing: Flexible – can be discussed with the right installer

I have clix floorboards which were pulled up from another house, so in great condition and need them installed over tiles. Flexible with dates. Would require you to visit in person to measure and provide accurate quote.

Need to install carpet and underlay in a 3 bedroom house in Clayton. Existing flooring already removed. Bedroom sizes are below, Master Bedroom: 3.9m x 4.25m (Cupboard 2m x 0.6m) Second Bedroom: 3.34m x 3.14m Third Bedroom: 4.59m x 3.05m

I’m looking for a skilled and reliable flooring installer to complete flooring installation in my home. Price subject to your quote. Please ignore the budget I set here. The job requires attention to detail and proven experience in timber and engineered flooring installation. Scope of Work: - Install 63m² of timber flooring plus 1 stairs glue on floor (Size 910x125x18) - Install 80m² of laminate flooring plus 2 stairs clip floating system (Size 1225x201x12) - O4O2 Peter 586 92🎱 Requirements: - Previous flooring installation experience - Flooring and skirting provided by owner - Strong attention to detail and quality workmanship - Must bring own tools and equipment - Reliable, punctual, and professional

I have three units required engineered flooring and carpet done. I need it done at most affordable costs. I can supply materials from Bunnings and Carpet world Please quote.

Need two rooms carpet and underlay installed. total 9.5 lm. Material at site. - Due date: Before Thursday, November 16, 2023

Need removal of current laminate flooring, slight levelling in some spots, supply (min 7mm) and instal hybrid flooring including scotia. The kitchen and power room must be sectioned off to allow for easy replacement if required and fully waterproofed. Approx 60 sq Installed plus want another 5sq as back up in the garage plus a few more for wastage. It will be everywhere besides the bathroom - Due date: Flexible

Small room 11 square meters and one step. we have selected the floorboard and will purchase when we confirmation from airtasker for suitability. - Due date: Needs to be done on Friday, 21 April 2023

Install approximately 85sqm of laminate flooring in my single level house. I have already removed the current flooring. There was previously floating floors so it shouldn't need too much leveling, if any. I will supply the waterproofing layer, all floor boards plus any skirting boards - Due date: Needs to be done on Monday, 6 March 2023

new amenities block with lunch room, change rooms and toilet area on a new wooden floor - Due date: Before Friday, 18 November 2022

Lay 14 square metres of hybrid planks in a kitchen and bathroom - Due date: Before Wednesday, 19 October 2022

Need carpets replaced for two rooms as the previous carpets got soaked. Willing to pay around $350 per room - Due date: Before Saturday, 20 August 2022

I am seeking an experienced and professional flooring specialist to complete a high-quality refinishing of my indoor solid hardwood flooring and spiral staircase. This project requires proper equipment, attention to detail, and the ability to deliver a smooth, uniform, premium finish. Scope of Work 1. Timber Floor Refinishing (Approx. 40 m²) Sanding & Surface Preparation Fully sand timber floors back to bare wood using professional-grade sanding machinery Precision edge sanding and detailed finishing at corners, skirting boards, and transitions Surface preparation including: • Filling minor gaps where required • Smoothing sanding marks and imperfections • Levelling surface to ensure an even base prior to coating 2. Application of Premium Clear Coatings Apply 2–3 coats of high-quality, non-toxic, water-based clear varnish Light sanding between coats (if required) to achieve a smooth, uniform finish Materials can be supplied by me, or you may provide a quote inclusive of all materials and labour 3. Final Protective Seal Apply a final non-toxic protective sealer for enhanced durability and scratch resistance Ensure a consistent, even, high-quality finish across the entire floor area Maintain and highlight the natural timber grain and tone 4. Spiral Staircase Refinishing (14 Timber Steps) Careful machine or hand sanding of each step, including treads and risers Precision detail finishing on edges, corners, and curved spiral sections Application of matching varnish/stain and final protective sealer Consistent finish to match the main flooring area Extra attention to drip prevention, smooth transitions, and edge accuracy Additional Requirements: Use of dust-minimizing sanding equipment preferred Clean and tidy workspace during and after completion Professional workmanship with consistent coating results Clear communication throughout the process Option for on-site inspection before finalizing the price

Sand and polish floorboards for one bedroom approx 10sqm

Floorboard requires entire sanding and polishing to remove wear and tear scratch marks. Flooring area is approximately 9 x 5 metres. Age of flooring is 17 years old.

floor need to be sanded and stained, lounge, kitchen and hall - Due date: Needs to be done on Wednesday, 20 December 2023

Sanding and polishing of hall and kitchen floor - Due date: Needs to be done on Wednesday, 30 November 2022

Sanding and polishing hardwood floor. Please give me quotes. All ground floor three rooms and lounges plus entry. It has got carpet lying at the moment but we will remove the carpet. - Due date: Flexible after 30/06/2022

I am seeking an experienced and professional flooring specialist to complete a high-quality refinishing of my indoor solid hardwood flooring and spiral staircase. This project requires proper equipment, attention to detail, and the ability to deliver a smooth, uniform, premium finish. Scope of Work 1. Timber Floor Refinishing (Approx. 40 m²) Sanding & Surface Preparation Fully sand timber floors back to bare wood using professional-grade sanding machinery Precision edge sanding and detailed finishing at corners, skirting boards, and transitions Surface preparation including: • Filling minor gaps where required • Smoothing sanding marks and imperfections • Levelling surface to ensure an even base prior to coating 2. Application of Premium Clear Coatings Apply 2–3 coats of high-quality, non-toxic, water-based clear varnish Light sanding between coats (if required) to achieve a smooth, uniform finish Materials can be supplied by me, or you may provide a quote inclusive of all materials and labour 3. Final Protective Seal Apply a final non-toxic protective sealer for enhanced durability and scratch resistance Ensure a consistent, even, high-quality finish across the entire floor area Maintain and highlight the natural timber grain and tone 4. Spiral Staircase Refinishing (14 Timber Steps) Careful machine or hand sanding of each step, including treads and risers Precision detail finishing on edges, corners, and curved spiral sections Application of matching varnish/stain and final protective sealer Consistent finish to match the main flooring area Extra attention to drip prevention, smooth transitions, and edge accuracy Additional Requirements: Use of dust-minimizing sanding equipment preferred Clean and tidy workspace during and after completion Professional workmanship with consistent coating results Clear communication throughout the process Option for on-site inspection before finalizing the price