Find experienced local fencing contractors in Surrey Hills

Hi, I need an experienced handyman / fencer to replace 1 rotted front gate post and re-hang the existing heritage gate. Scope of work: 1. Dig out the old rotten timber post and break/remove the existing concrete footing. *Note: Careful hand-digging is required as there is an NBN/Telstra lead-in conduit nearby (BYDA plan attached in photos).* 2. Supply and install a new Heavy Duty Galvanised Post Stirrup (e.g. Pryda Full Stirrup / High Wind anchor) set in fresh Rapid Set concrete to prevent future rot. 3. Supply and fit a new matching timber post (100x100mm or 125x125mm with a Pyramid post cap to match the left post). 4. Re-hang and align the existing wooden gate with proper heavy-duty hinges/latch so it opens smoothly. 5. Rubbish disposal: Take away the old concrete waste and rotten timber debris. All materials (Pryda stirrup, timber post, post cap, rapid set concrete, heavy duty bolts) and tools to be supplied by the tasker. Please provide a quote for the full job including materials and waste removal. If you can also supply/build a new lightweight matching Federation cross gate, please mention your option and separate quote in your offer. Thanks!

Remove the colorbone fence ( 4.75m ) to be replaced with the timber fence ( 4.25m ), and take the old timber fence away.

Install a gate on side of house. Provide gate- steel frame and structure. Dig footings and install including lockable function so secure. I have added an image of the type of gate I need. Please quote for the whole job not excluding materials- full costed job

Build gates (timber slates on a frame) want it good quality.

We’re installing a front yard balustrade and gate and need a steel post installed to support and stabilise the structure. Scope: - Supply and install 1 x steel post - Post size: 100mm x 100mm (dressed smooth) - Install depth: 400–500mm below ground level (concreted in) - Finished height: 1500mm above ground level - Ensure post is level, plumb, and suitable for fixing a balustrade/gate to Notes: - Task includes sourcing materials (post + concrete) - Easy access to the install location

Add an end post to the fence and shave off a bit of the gate post so the gate opens and closes without obstruction

Small portion of metal fence to be cut or removed. Refer photos. Should be a quick job for someone with the right equipment to saw through metal. 10 small poles and one slightly larger post.

I have a Highgrove frameless pool fence and need the glass resealed/re attached into the bracket on the ground and a replacement clip supplied by you if possible to join the corner together. Happy to FaceTime and show anyone what needs to be done but I’ve attached a couple of photos as well. At present the weight of the door which is attached to the next panel is forcing the Glass to fall towards the ground so resecuring the base will hopefully re-stabilise the pool fence. Thickness of glass appears to be different on each side of the corner.

Hi, I need a handyman or fencing contractor to repair a damaged section of my timber boundary fence. The vertical timber paling has split and separated, leaving a gap. It’s roughly one fence panel affected.

Replace timber fence. Left side (1.26m wide X 1.84m high) Right side (3m wide X 1.65m high)

I need a handyman to strengthen and reinforce a timber fence that becomes unstable and shakes (area between two red lines )red when it’s windy. The fence itself is intact but needs bracing or reinforcement to make it sturdier and secure.

Fence on the side of the property fell down. Seeking a handy man to put them back up and stabilize it.

We are looking to install new fencing and an automated gate.

7m front fence requires 7 cross beams replaced, fence stabilised, capped and painted black

We have a swinging fence but would like it to slide instead so we can get both cars in and shut the gate - doesn’t have to be automated and can use existing gates if possible

Supply deliver and install one glass pool fence panel size 1200 X 1600 X 12. Panel is replacing an existing panel which broke and has been removed. Original spigots and fixings already in place and will be suitable for remounting. Glass must comply with relevant Australian Standard per photograph attached.

Hi there need someone to help me to install timber fencing.

Wooden fence needs repairing. It has started leaning outwards towards next door's property. 4 fence posts leaning outwards.

Gate post needs removing and then replacing - will involve disassembling gate and part of the attached fence to remove and then replace the post and reattach gate and fence. Gate post is heritage style and replacement will need to be sourced from suitable supplier which I can arrange myself if required. Budget quoted is just a guide for labour only and I am happy to negotiate.

I need a quote of removal n replacement 6m of 1800mm fence palings of pine fencing. 1 post also needs removal n replacement Note plinths do not need replacement. Pls also provide a quote of additional 1m of paling removal.n replacement as up to an additonal 4m of palings have moved in some spots n may also need replacement Thanks