Find experienced local fencing contractors in East Melbourne

require new garden gate to be installed

Hi I have bamboo screen panel in garden 4 bamboo stick come out need to fix

My dog has been digging my backyard up. Abit damaged now because of the rain and looking to get it fixed asap. Looks a lot worst now in person. Send me your offers

Add 2 garden gates (1 large and 1 small), remove a

Install approx 40m wire mesh fence. Materials supplied.

Need to extend/cover the back yard fence to meet the council height requirement of 180cm. I will provide the Eden 1.8 x 3m Charcoal PVC Garden Screening With Capping from Bunnings. Just need a frame put behind and attach this to existing fence with the length of 11.98 meters. - Due date: Flexible

We are updating Landscape in our yard and need some different fence and gate see attached. We need fence supply and installation - Due date: Flexible

We have just built a front fence but our existing side fence doesn't go all the way to make it secure for our dog. Need to extend the fence by a couple planks. Don't have any planks will need to buy.

I need 8 poles installed in my garden. They don’t need to be as thick as fencing posts but need to be secure.?4 is these need to be 2 metres tall and 4 of them need to be 1.8 metres tall.

Garden gate on paling fence with a steel-frame. Looking for supply and install of access lock to 2 gates. Both gates are slightly sticky at their top edges and will need to be sanded down to close smoothly.

The garden gate was falling down

Cat netting + Fence extension

Looking for innovative flexible rubber padding on the bottom of the gate to fill the gape due to slope We have a escape artist Husky dog to stop sneaking or running away.

I require 2 x powder coated (Black) galvanised post as shown in the attached images. These posts will.be used to attached netting for golf practice. Posts will require some form of steel eyelets/brackets along front of upright post and under thr top post to allow fixing of wire or net 3000mm (h) x 2500 (w) Require 2x 500mm (h) base tubes (to be concreted i to ground) for main post to slide into to allow post to swivel.

Need a fence built for our staffy who has strong bites. Please come to consult about material and labour needed

Project: Indoor Pet Shop Safety Gate Fence** Location: Balwyn North Safety Gate Dimensions: - Length: 150cm - Height: 120cm Material Options: 1. Wood 2. Iron Details: Please refer to the attached design drawings for specific requirements. Quotation Requirements: 1. Cost breakdown for wood and iron options. 2. Estimated delivery time. 3. Any additional recommendations for the proposed materials. Thank you. - Due date: Before Friday, 5 January 2024

Hi I am looking for someone to quote ,who can install gate, motor and custom fabricate the gate frame (swing gates). 1. Swing gate (6.9 m) 3.45m x 1.0 m high ( 2 frames).Powder coated & painted. 2. Single Pedestrian gate - 1.2 wide x 1.0 high.Powder coated & painted. 3.Motor x 2 ( one on each side) installation Hope to here from you soon. - Due date: Flexible

We need someone to pet proof our backyard (install cat fence toppers and mesh in fence gaps). Would require someone to bring their own equipment, fence toppers and meshing. - Due date: Before Friday, 29 September 2023

Need a pool fence certified - Due date: Flexible

I need a fence built so i can keep my two puppies down the side.. - Due date: Flexible

Hi I need the dog panel picked up from a factory I'm bayswater and delivered to North warrandyte. Also a 600 mm star picket slammer! - Due date: Needs to be done on comjng Monday March 2023 or today.

Dig and install chicken wire to fence to stop dogs from escaping. - Due date: Flexible

Three scratching posts needing recarpeting

I am moving into a rental property and need a basic gate/fence to enclose the back yard for my dogs. Nothing fancy, just practical. I am flexible with price!!!!! - Due date: Before Thursday, 3rd Mar 2022

Need a fence to go over a drive way for my dog. Must have a gate as well.

Hello I need a few modifications to comply with certificate 4. Modify the pool gate to be self-closing from any position including resting on the latch. 5. Spacing of the vertical bars is more than 100mm. Please provide Perspex on the outside of the pool fence or make the gaps less than 100mm by re arranging the vertical bars or provide chicken mesh which has less than 13mm aperture and secure it with the fence with screws/bolts. 6. Gap between the fence post and vertical bars on pool gate is more than 100mm. Please provide timber or solid materials to reduce the gap less than 100mm. 7. Outside of the pool fence on the north east side has climbable objects (electrical point) within 1200 mm quarter circle measured from the top of the fence. Please relocate the electrical point or 60-degree shield may be fashioned out of aluminium, stainless steel or polycarbonate. The shield makes the top surface of the power point too steep for a small child to gain a foothold. 8. The lower horizontal member of the fence to the upper horizontal member is less than 900mm. Please provide Perspex/Particle board/Solid material so that the distance is more than 900mm. 9. Adjust the effective height of the pool barrier at the at the west side from 1180 to a minimum 1200mm by removing the soil 500mm from pool barrier on the approaching side or readjust the panel height so that it is 1200mm from existing ground. If you choose to readjust the height of the fence, please make sure gap underneath cannot be more than 100mm

Require colorbond fencing for my house

new colourboud fence 17mts With 600mm retaining wall under fence

I need a quote for a colour bond fence wide roughly 7.5-8 meters height roughly 2.25

15 meters long timber fence needs to be replaced. Colorbond fence prefered.

Looking to build 7*2.8m colour bond pargola, closed from 3 side and gate. Please put your offer for labour cost. See atttached photos of the site. Needs this to be done asap if possible before 26th

Remove old timber fence Replace with 1.8 m high and 18 m long colour bond fence

Need to take off old fence and need to install colour bond fence and a wooden slab needs to be changed as per 2 nd picture ( not the part of the fence).

Want to install a new driveway entry gate .

Approx 8-9m colourbond fence including 1x gate I hope to make it to 2.5m high also existing perimeter fence (timber) needs repair. Note for new colourbond post hole can be prepared myself as digger on site.

Existing colorbond fence dividing two town houses fell due to recent weather event. Needs to be put back up and fixed in place.

Need approx 15-20m of fencing done at a height of 1500mm including a gate. This is to enclose a front Patio area once concreting/decking is complete in June. Please send me quotes. Material to be Aluminium Slats or Colour-bond

Remove existing fence and gates and replace with new colorbond. - Due date: Flexible

Build new colourbond side fence - Due date: Needs to be done on Thursday, 2 November 2023

R/O colorbond panel + gates & supports, for concreting. Then reinstate panel + gate & supports after concreting - Due date: Before Friday, 3 November 2023

Please provide a quote for a 2meter high colorbond fence gate. The total front opening is 7.5meters, the gate width would be 5-6 meter colorbond fence gate. - Due date: Before Monday, 16 October 2023

I have an old timber fence that has definietly seen better days. total length needed is 43.7 metres, at a height of 1950mm. I am open to timber or colourbond, so please quote either one. I am looking for a cheaper quote, as the neighbour does not want to spend too much. Thank you - Due date: Flexible

Looking to install Colorbond fence in the front of the property - 1.8m. Because of height requirements will need help for council permits as well. Pls don’t respond to the post if you can’t help with permits. Frontage Length - 17m (including space for driveway). - Due date: Flexible

Looking to get a colorbond fence between neighbour and my property. Length 37m, and height approx. 2m -2.2m. There is a slight slope in the land, so will need timber sleepers. Also, will need to instal supporting poles between panels. Previous timber fence needs to be taken down and taken away. - Due date: Flexible

rebuild a 24m colorbond fence , 2.1m height - Due date: Flexible

Existing wooden fencing is damaged and needs to be replaced with colourbond 2.1 m high across approximately 15m and old fence to be disposed. This is a stright fence and has no corners. Provide colour bond options. - Due date: Flexible