Find experienced local fencing contractors in Brighton VIC

3 gates in total - wooden driveway gates with metal frame. Note posts either side of gate will stay so its just painting these. The driveway gates attached to remote control motor and metal arms which will also stay , ie no need to be replaced, but new gates do need ro be reattached / fitted to arms that connect to motor. Gates are wooden with a steel strip support frame which you can see in pictures. Second gate is entry/ walkway down garden path. Again the posts on either side are fine. Gate itself is rotten/ also has a letterbox. 3rd gate is a small gate that separates path from deck. We need gates built installed and painted. And all waste incl old gates disposed of/ femovedrDriveway gates 1405mm x 1520 height (x 2) . Pedestrian gate 1405mm x 1520 height. Small gate 1225mm x 1310 height

The fence is slanted and I would like the 3 fence posts repaired.

Build a new timber fence between our house and neighboring properties, with the fence being 3.2m high and approximately 10m wide, painted a charcoal colour

3.6posts. 2.8high fence 41m side 15.5 back Access

Need 31m of high paling fence plus trellis done the old fence also needs to be taken away

I need my glass pool gate adjusted so it closes properly.

I need two black panels added to my front aluminium fence for privacy. See photos of how I want the black panels to look and also a photo of our existing open aluminium fence panels. To clarify, I will keep the existing aluminium open panels, but require a flat black panel to be attached behind the aluminium open panels for privacy. Approximate measurements of the flat panels required are 980mm high x 2270mm wide. I'm flexible on timing.

Im looking for timber fencing installer. Around 100m

Replace existing lattice above pailing gate to match adjacent pailing fence and insert shoring panel at base of fence (to stop soil pouring out)

Need to make pool safe boundary fence to our side of existing paling boundary fence which has structural metal columns bolted to concrete base. Would like timber batons and may require a timber backing painted black to match existing fence. Need capping on top to prevent leaves falling inside Please provide quote. Must use materials and paint suitable for external use. Last two images are some Inspiration. Open to suggestions. Need it done i need next few days. 6.7 m x 2.6 to top of concrete Minus materials for fence where bbq is Bbq area is 1.5 h x 2.7 w

Replace a timber fence 2.6M wide x 1.8m high. Refer to pics

48m2 fence Iron and cement columns Need sliding gate and PA gate aswell

Repairs to a fence Repairs to a lock on the outside gate Repairs to a roller door

Please install a parcel box in existing brick fence - you need to cut through the bricks. It is double brick. Flexible with time. The parcel box I bought is attached. Plus a guide I found but I can’t do it myself.

Glass pool fence not closing properly

To attach rails pine 70x50 to fence as shown in photo extended along a 3.8m expanse (to provide pine) and then attach pre-made screens (same as those in the photo) to this pine

Need to have two currently unpainted paling fences painted. Total distance is approx 100 linear metres (45m on one side and 55m on other). Fences are around 6ft tall. New colour to be monument. We are building a new house and site is currently under construction by builders so need to liaise on timings for access.

The 2 welded hinges snapped so now the fence gate is not sitting on any hinges and cannot open or close.

Replace temporary fence with basic 2m high X 12m fence front of vacant land

I need somebody who can use a nail gun and listen to simple instructions. 30ph