Find trusted local electricians in Canberra Central

Read the electricty meter after collecting keys from Strata

Installation of a 15a PowerPoint. New garage and internal switchboard recently installed. Just need a 15a PowerPoint installed next to it.

I have a light box signage and it needs to be installed outside the shop ceiling

I have two matching outdoor wall lights that require repair. Both lights have developed the same fault: the large metal shade/lamp-holder section has separated from the smaller upper bell attached to the gooseneck arm. The original metal fittings, shades and glass covers are all in good condition and I want to retain the existing lights rather than replace them. From inspection, the issue appears to be with the internal E27 lamp-holder/mounting assembly. The plastic lamp-holder and/or the hardware that mechanically connects it to the mounting bracket inside the upper bell appears to have failed with age. I’m looking for a licensed electrician who can: * Repair 2 identical fittings. * Inspect the existing E27 lamp-holder and internal mounting arrangement. * Replace the lamp-holder and/or threaded nipple, retaining hardware or mounting components as required. * Mechanically secure the large shade back to the upper bell so the fitting is properly supported. * Reconnect/terminate the existing wiring correctly. * Check that the conductors have not been damaged or strained. * Refit the existing glass covers and bulbs. * Ensure the fittings remain suitable/weather-protected for outdoor use. * Test both lights for safe operation once completed. Important: I would strongly prefer to preserve the existing metal shades, gooseneck arms, wall plates and glass, as the lights match the architecture of the house. The failed internal components appear relatively standard, so I expect suitable replacement E27 lamp-holders/mounting hardware can be sourced rather than replacing the entire light fitting. Photos attached show: 1. the failed fittings and exposed mounting hardware; 2. the lamp-holder assembly; 3. an intact matching light showing how the completed fitting should sit. Happy for the electrician to either supply the required parts or advise what needs to be purchased. Please include/indicate parts separately from labour if possible.

Looking for a fully licensed and insured electrician to install an EV wall charger on a fixed project basis at my property in Canberra & Surrounding areas. Project Details: • Charger Model: • Charger Supply: I have already purchased and supplied the unit. • Phase Type: Single-Phase / Three-Phase • Mounting Location: Inside the garage / On an external brick wall • Switchboard Distance: The main meter box/switchboard is approximately [e.g., 5 metres / 15 metres] away from the mounting spot. • Cable Path What the Project Scope Covers: 1. Securely mounting the EV charger unit. 2. Running a dedicated 32A circuit from the main switchboard to the charger with appropriate RCBO/RCD protection. 3. Testing, commissioning, and configuring smart/load-balancing settings (if applicable). 4. Supply of all necessary cabling, conduits, and electrical consumables. 5. Providing an official electrical Certificate of Compliance (e.g., CCEW in NSW) upon completion. Requirements: • Must be a registered, licensed electrician (please provide your licence number in your offer). • Prior experience with EV charger installations is highly preferred. • Compliance with AS/NZS 3000 electrical standards. Please provide your fixed-price & Extras for the total project, including your earliest availability.

Hi, I’m looking for a licensed electrician to help with a few small jobs at my apartment: 1. The light on my ceiling fan is not working. The fan itself works fine. I replaced the globe, but the light still doesn’t turn on, so I’d like you to check the connection and fix it if needed. 2. Replace the globes in two lights in the living room with brighter globes. I already have the globes. 3. Check two other light globes and let me know whether they are energy-efficient/LED. I already have all the replacement globes. Must be a licensed electrician.

Looking for a licensed electrician to install and connect a new oven at my home. The old oven has already been removed and disposed of, so only the new oven needs to be installed and connected. Please bring your own tools and let me know your quote and availability.

I would like a light bar installed on the top of my car doesn't have to be perfect preferably a 32 inch to 40 inch light bar

Lamp switch is broken and lamp needs rewiring.

I need services of an electrician. I have unexplained consumption of around 15,000–16,000 kWh/year from the grid despite 10 kW solar and a battery. Existing system: 9.99 kWp Trina PV, Sungrow SG-10KTL-MT three-phase inverter and 9.6 kWh Neovolt battery. Household consumption approximately 20–22 MWh/year. I already have two years of 5-minute smart-meter data. Please install circuit-level energy loggers for at least 7 days to identify the source of unusually high electricity consumption with the actual CSV/data supplied to me afterward. Monitoring of: 1. all three incoming phases / total house consumption 2. HOT WATER 3. POOL 1 and POOL 2 4. AIR CON and 3-phase AIR CON 5. hydronic heating electrical supply/pumps, if separately identifiable 6. solar/battery circuit if useful 7. ideally one channel covering the remaining general power load. 8. kWh per circuit, power versus time 9. the raw CSV/exported data This post is for initial consult on phone and then you can tell me the cost of data collection. I have attached photo of switchboard at my home.

In my apartment, my main bathroom and ensuite share an inline ducted exhaust. In the main bathroom the exhaust fan runs when the light comes on. In the ensuite, the lights are no longer triggering the fan to come on. Hoping this can be fixed.

Electrical outlet not working. I have a replacement but need someone to change it who is qualified / know what they are doing

I need 11 bayonet light fittings replaced with LED down lights and 1 dimmer switch for the master bedroom. Install only. Lights and dimmer switch will be supplied.

Smoke alarm is beeping. Need to remove batteries ASAP. Ability to stand on a chair or small ladder required.

Need a qualified sparkie to fit a Delta smart double touch switch. This will swap out a typical double switch for a toilet light and fan for a delta smart switch (bought from Bunnings. https://share.google/rS4iXqqqL0GGXaFe1 ) that will put the fan on a timer.

Downlight in kitchen not working after changing the bulb.

Removing several power points from 2 walls in a office.

Need lightbulbs and downlights replaced

A couple of electrician based tasks required around the house - installation of a new light fitting in the living room (3 independent lights to be hung together similar to first pic) - replaces existing - installation of 6x up/down lights around the deck - new fittings - rewire a standing lamp

Replace power point and rewire . Middle switch is lopsided and is causing Induction hob to switch off