Find experienced local carpenters in North Curl Curl

Use blackbutt timber which I will purchase (145mm x 30mm), to construct: 1. A ballustrade for a standard height set of internal stairs 2. A capping for a "dwarf wall" For the ballustrade- there is already a thin piece (30mm x 30mm) of blackbutt attached to the gyprocked stud wall wall that has an LED strip fitted under it (see pics 1-3). The thicker piece will be screwed onto this, centred so that the top part sits up approx 50mm creating a handrail compliant with the BCA, and the lower part overlaps the LED by about 50mm. Sufficient screws should be used (I can purchase beforehand) and rebated and ideally filled with wood plugs which you will make from the blackbutt offcuts. The ballustrade will require 3 joints- two are 2-dimensional involving about a 15 degree angle, one is 3-dimensional involving approx 15 degree angle on one plane, combined with a 90 degree angle as it's in the corner. I don't require a mitre joint- I think a butt joint may work better. For the capping on the dwarf wall- this is much simpler, as it just involves 2 mitre joins. Wall is about 4m long and already gyprocked, with top left bare- see pic 4 which shows the surface they will be attached to (blue timber framing). I'd also like wood plugs for the screws on this one please. I'd like the wood rounded off on the edges, but no sanding or oiling/ laquering is required, as I can do this, however I'm happy to take advice- it may be easier to do the back of the ballustrade before it's attached to the wall. I can add pictures tonight.

I need to make a one meter long frame at a certain angle to pass council laws 66 degrees along an edge. If you know carpentry this should be easy enough but need to make at the right angles. I can send pictures of what I want

Custom small tall white shelf to fit a very particular nook in my house

Design additional cabinet to fill space above current kitchen cabinets Make cabinet Install cabinet Cabinets already in kitchen are glossy white with border edge I believe flat wall cabinets

A stainless shelf put up outside on the wooded fence.

I need a qualified carpenter to adjust and rehang this door to reopen inwards instead of outwards. Includes replace/reuse existing jamb as required. I am getting an outward-opening screen door installed in the existing jamb.

Alter current cabinets to allow new sink to fit, Build platform for new sink to sit on, Install sink underneath bench-top and secure - Due date: Needs to be done on Wednesday, 2 November 2022

We installed a dishwasher but need the drawers made smaller to fit back in.