Find experienced local carpenters in Balaclava VIC

Adding timber trims to a door- the wood is bent and cannot be glued. I require someone with a nail gun to affixe 8 pieces of trim to a door

Please note: Work required in MAY. I am undertaking a renovation and the Kitchen cabinetary is being reused at another house. The job is to carefully defit the cabinets so they are preserved for refit. There is: 1 x Island with 2 x 3 drawers, wooden benchtop needs to be cut at the edge of the drawers as it wraps around a corner 2 x Floor cabinets with 3 drawers - wooden benchtop to be kept 2 x Glass fronted overhead cabinets

I have a wall mounted bathroom cabinet and the left hand cabinet door needs to be replaced (due to chipped glass). I have the replacement cabinet door that needs to be installed. Looking for someone to: * Remove left hand cabinet door * Install and align the new replacement cabinet door * Attach hinges (using existing hinges available) * Ensure door opens/closes smoothly and sits level This is a standard bathroom vanity cabinet. Please bring your own tools in case minor adjustments or drilling are required.

We’re looking for someone experienced with IKEA kitchen cabinets to assemble 4 x METOD base units this Saturday. The units are: * 1 x METOD base cabinet with shelves & 2 doors * 1 x METOD / MAXIMERA base cabinet with shelves, drawer & 2 doors * 2 x METOD / MAXIMERA base cabinets with 3 drawers (standard 3-drawer units) What’s required: * Full assembly of all cabinet carcasses * Install all internal hardware, runners, hinges, etc. * The drawer fronts and door fronts are currently off being painted, so you don’t need to fit the visible fronts Once assembled, the cabinets need to be bolted together into a single block (I’ll show you the configuration on the day) All cabinets are brand new and on site, with clear space to work. This is a straightforward job for someone familiar with IKEA kitchens. Please note: The timber floor in the apartment is a few days into curing. There are carpeted areas where the cabinets can be assembled comfortably. For any work on the timber floor (bolting together and general movement), please ensure shoes are clean or wear socks for that part. Thanks for taking care with this.

We need to install 4 wooden peg boards from Willow and George. This will be done on a drywall.

Hi, I’m looking for someone who can help to do a simple wood cutting. I have a plywood need to be cut into round. I can travel to your studio. Cutting details: I have 274cm x 90cm rectangle plywood, need to be cut into: 2 x 75cm diameter round 1 x 60cm diameter round 1 x 50cm diameter round

MUST BE TODAY I urgently need an experienced licensed carpenter to do some minor repairs and the odd board replacement in balaclava 3183. I’ve put some images. Basically need some pine slivers added to small chunks of board missing. Some just 2-3mm deep some small be the whole depth. The cost I’ve put is an hourly rate. In your quote please let me know your hourly rate if it is different to this after this first hour.

Looking for a Cabinet Maker We’ve recently updated our basin area, and now we need a clean, simple cabinet to finish the space behind the basins. Looking for someone who can create a modern, minimal design that complements a salon environment — sleek, functional, and well-finished. Also i want same thing to match in the front area. If you’re a cabinet maker who loves clean design and attention to detail, please get in touch! I will buy whatever you need to use before hand.

Cabinets in bedroom and lounge room in murrumbeena

Must be a licensed carpenter. Repair wood on French doors and replace wood ledge

Need someone to repair a water stained floor in two locations in the house. Possibly just needs sanding and wax as just surface level. Doesn’t have to be perfect just to improve appearance.

Need a carpenter / handyman to build 2 x freestanding wood panel displays in plywood. Each to be approx 2200mm high x 900mm wide ( 2200 cut in half for easy transporting), See attached image for example. Each panel to have arch on one side only. Budget includes materials. Required by 10 June. Pickup or delivery to Balaclava / St Kilda East.

Need a cabinet base raised in my kitchen so my fridge will fit as it's too tall. Wanting a carpenter that can do a neat and tidy job

Require a carpenter to install 2 x timber hand rails onto our staircase. running approx where the red line is in the photos.We have an elderly person moving in, and requires the handrail for mobility. The lengths are 1400mm & 1500mm. 2 wall brackets each. Must supply your own tools and stud finder.

Three hardwood timber shelves from ‘The Timber Line’ to install into a timber framed, Gyprock-walled room. All hardware supplied with received kit (pre-cut threaded rod and metal sleeves). Instructions in images below. Two shelves are ~800mm, and one ~1000mm long. Looking to get done between Friday 14th and Friday 21st March. Job is for our soon-to-be newborn’s nursery, so needing a super good job on this.😊

We have a cupboard under the stairs we need to fix or replace the doors. There is also other jobs that we need quote for which suits a Cabinet Maker skill.

Rotten bottom wood panel on side gate needs replacing (not painting) as well as repair to wood on the eaves of external roofing where insulation has become visible (painting not required).

Needing someone who can make changes to an existing kitchen and prepare a space to install a washing machine. You would have to see the space and quote for time and materials.

Remove the laundry cupboard door and help lift a standard sized clothes dryer on top of a washer and reinstall the cupboard door. Due to space limitations the door needs to be removed first before dryer can be placed inside.

I need a cabinetmaker to move this cutout along to the right so the sink is centred in the cabinet. Left hand side gap to be patched and strongly reattached.