Book a trusted oven repair and installation expert in Melbourne

Originally the cabinetry was built for a freestanding oven. But I had an issue with the oven and ended up swapping to a cooktop and seperate oven. A carcass has been built for the oven to sit in but I need the gaps finished off. It’s the gap at the top, kicker at the bottom and the sides. I have the materials left over from the original cabinet maker. If I don’t have enough there is additional panels in the fridge area which might need to removed to use. The cabinetry I have isn’t available anymore.

Repair my glass oven door that has fallen off and replace inner rubber oven seal that's worn Westinghouse Bolognase electric oven

I have a large Ramalhos deck oven that the 3 decks need to be dismantled for removal off the premises. I can arrange the removal, but need the 3 decks and stand dismantled.

We can organise 3 units in our block to have jobs done same day to save you transport time and call out fees. Downlight not working, maybe need to change fuse, and new oven light not working

Task: Replace the thermostat in a built-in Smeg oven (model SA561X-9). Issue: The oven overheats – it’s set to 90–100°C but reaches over 210°C (tested with an internal thermometer). Most likely the thermostat is faulty and needs replacement. Details: Built-in unit (requires sliding out from cabinet) Top panel needs to be removed to access thermostat Standard wall plug power Located in Alphington, accessible parking You can quote: With just labour, and I’ll supply the part OR include both labour and the thermostat in your quote (Please specify if your quote includes the part or not – I can supply it if needed.) Preferred timing: [Insert your preferred date/time or say "flexible within the next few days"] Must have: Experience with ovens or appliance repair Own tools Preferably a licensed electrician or experienced technician Please respond with: Your availability Whether your quote includes the part Any relevant experience

Hi, this is my Blanco oven, which seems to have an electrical short. The issue happened when I tried to remove the top rack that was inserted the wrong way — it got stuck on the heating element and caused some damage. • 1st photo: Oven when it was still working • Next 2 photos: After the damage (oven not working) I’m looking for an experienced and reliable technician who can repair it safely and check for any electrical issues. My budget is A$120–A$160, and I’m located in Melbourne CBD. Available times: • Thursday, 30 Oct 2025 – between 10:00 AM – 4:00 PM • Monday, 3 Nov 2025 – between 8:00 AM – 4:00 PM Thank you Kan

Smeg oven door taken off - strong springs to get pins back in. Need help with reattaching pins and placing door. Relatively quick job

I need to plug in the combi oven at my cafe. Note: the oven does not have apower cord or plug pre installation, so need that as well.

I have taken apart my oven door to clean in between the glass and cannot correctly put it back together again 🤦🏻‍♀️ as part of an end of lease clean Issue is that I’ve screwed everything back in as best I can, with the metal rods that are meant to secure the inner glass layer, but the inner glass layer isn’t properly secured. I’m thinking it’s something I’ve done wrong with screwing in the metal rods the wrong way and so it means they can’t secure the glass- I just can’t figure it out, but am thinking it would be quite simple for someone who has cleaned an oven or two in their time!

Licensed electrician to install hard-wired oven and replace two porch lights Job summary Looking for a licensed electrician to complete a few small residential jobs. Tasks • Oven: – Unplug and remove current Westinghouse wall oven ( plug in model ). – Remove the wall outlet and hard-wire the replacement Westinghouse oven (240 V, 4.5 kW, ~19 A) to the existing dedicated oven circuit. – Supply short length of 75 °C heat-rated cable and fittings as needed. – Test and issue compliance certificate. • Porch lights: – Replace two existing light fittings (one ceiling mount, one low wall/path light). – Wiring already in place; just remove and install new fixtures. – Fixtures provided Location: North Melbourne Timing: Mon/Tue or Fridays, anytime from 8am to 5pm. Please quote for labour and small materials. Licensed electrician only.

Two knobs on my over are pushed in and need fixing. Also one light in the exhaust fan

After some assistance to have a gas oven disconnected before the electric oven is put in. Oven is free standing gas - if you can take it as well, that’s great. Not essential though!

* Replace an old Bellini BOT608X-F oven with a Miele Steam Oven ( DGC 7250). Model requires 16A. The plug is in place. I have attached a picture of the Switchboard. * Install an outdoor double plug on the brick wall for the hot water system. There is a plug indoor close to the unit.

Miele oven stopped working

I’m in Moonee Ponds and I need a new oven/stove connected and the old one disposed of by a qualified electrician.

Here is the photos of kitchen, have separate line for oven and rangehood already. need to finish up circuit connection for induction cooktop(see photos for progress). Please note you will need to supply cooktop safety switch that can be integrated into existing power point seamlessly without needing extra holes for seamless look - refer to photos for placement. New appliance are Bosch- here are serial numbers for reference if needed Oven: Bosch – HBG976MB1A - line exists Cooktop: Bosch – PVS631HC1E - finish line connection(pre drilled holes) Rangehood: Bosch – DBB67AM60A - line exists Also will need LED lights installed in cabinets(have two of them for each side of range hood) to be connected to the power point on top. Have LED channel as well)

Hardwire oven. New oven, with wire ready to connect.

Hi - I am getting the floors re-done and need an electrician to disconnect the oven this week. At the time of installation, the previous electrician needed chain it to the wall for manufacturer warranty purposes, so it will need to be disconnected there too. Happy to answer any questions. Many thanks.

Inside panel of tempered glass in oven smashed. Need a new panel installed

Install only required by qualified electrician to fit 60cm new electric oven. Required on Wednesday July 9. Old oven has already been removed. Make and model below. South Melbourne home. https://www.appliancesonline.com.au/product/emilia-60cm-stainless-steel-electric-multifunction-oven-emf69e/?origin=product-search&kwd=&gad_source=1&gad_campaignid=185901768&gclid=EAIaIQobChMIq-O4t8qQjgMV4KlmAh14FSXbEAQYASABEgKdHfD_BwE