Find professional window and door services in Pyrmont

Door handle needs to be replaced. Open to quotes.

One set of existing glass sliding doors, 4.7m wide x 3m high to be removed and disposed of. The door has 6 leafs in total , each approx 800mm wide. One fixed leaf and two sliders to each side. The unit is half a level up above street level, so can potentially take the individual door leafs out through the window straight out to the street level. I need this to be done on the 24th October. The doors are in good condition and can be re-used.

Remove screw from window frame. I have tried but seems seized there.

Need to replace the bathroom door. Door width 715mm n length 2015mm door replacement including lock and color

Replace old sliding shower door

Require sliding door to be installed for a small bathroom. I have a painted and ready hollow door and a wall mount runner/pelmet. Door will be similar to a barn door in that there is no cavity. I dont think the job will be complicated for someone handy, but i'd like it done well. I've checked the runner fits above narrow gap above the frame and other logical items. Door frame - The current door frame is old school metal. - Open to suggestions, but a good solution seems to be to fill in the door jamb so it's flush, then add a 5mm x 40mm trim around the inside wall to frame it (have the door sitting flush against the frame when closed and running 5mm off the wall). I can: - repair any minor damage to plaster or wall paint that occurs in the process. - paint the frame after the door is installed. If the pelmet allows approx 2cm extra space when completly open, I should be able to do this and put a rubber stopper on the runner later. Door Install - Wall mount "forerunner pelmet". The wall is cement/brick. I can supply hammer drill, plugs and screws. - I think a 10mm spacer will be required behind it. - The pelmet will need to be cut shorter, so will require a grinder. I have a hand saw. - The pelmet will need to be installed with the door attached, i can help hold the door if required. I have measurements and sketches of how it should fit. Work required in 2 or so wks.

Hi! I’ve purchased a 2040x720mm internal door from Bunnings (pre-paid, ready for pickup). I need someone to pick it up and deliver it to my place in Pyrmont, then install it in place of the old one. The door only needs the handle hole drilled, using the old door as a template. The existing hinges can be reused — same positions, no adjustments needed. No cutting or planing required — just pickup, drilling, and installation. I’m available any weekday after 5:30pm, or any time on Thursday. Let me know your price and availability — thanks!

Fix or repaint scratched door, offers please

To save space need do change 3 doors do adding door . Door is 2.5cm thick and the current gap inside is only 2.5cm . I can accept internal track or barn door solution but the vent wall part not sure if it’s strong enough . please offer pricing and solution

Timber from Bunnings or similar, cut to size, sand edges, apply varnish to all sides and allow to dry. Remove and replace the five slats once varnish is complete and dry.

***CAR/UTE REQUIRED (Vehicle to fit a door inside for transport) **PRICE - just for labour cost - I'd pay for the door itself/bring receipt. I need someone who has experience/knows how to replace a door (internal door, hollow core I believe), to replace my current bathroom door with a new one. I've got a battered in hole damaged, so believe replacing the entire door the easiest way without seeing noticeable signs of repair. I'd want to keep the existing door handle and towel rack holders (all attached pictures), so would be unscrewing those, drilling/putting those back ideally the same way as before onto the new door, and installing the door. I think current door has 2 hinges. I've had a look and found what I think would be an okay match on Bunnings. I've measured my current door and the measurements are approximately: 2000 mm x 715 mm x 33 mm. There's different sizes for the Bunnings door I thought would be fine, but closest match I can see is the: 2040 mm x 720 mm x 35 mm. Unsure if anything then needs to be cut down, or it may be the same/very similar door they have used here. Link: https://www.bunnings.com.au/hume-doors-timber-720-x-2040-x-35mm-internal-door-primed-mdf-flush-h1_p2012188 I'd need you to drive to the Bunnings, pick up the new door as well, as I don't own a car.

I’m looking to repair a sliding mirror door that broke. The dimensions are approximately 225cm x 80cm. Could you please provide a quote for replacing the mirror and any relevant details, such as timeframes and costs?

Bedroom door handle needs force to open. Shower door does not close properly

Need to attach a plate to a door that has been damaged. See photos for before and after. The plate is with me it just needs to be attached you may need glue but I can supply that really all you have to do is remove the door handle and place it on properly

Need someone experience replacing the broken wheels under glass sliding doors

Hello, I need a fly screen to be installed on one of my windows.

Require handyman to replace fly screens on two sliding doors

Task Title: Seal a Window Joint to Prevent Water Leakage Description: I need a professional or experienced handyman to apply silicone to a window joint in my apartment located in Pyrmont. The goal is to seal the joint properly to prevent water from dripping into the property. Details: Location: Pyrmont, NSW Task: Apply silicone to the affected window joint. Purpose: Prevent water from leaking through the joint. Requirements: Must have experience with silicone sealing. Bring your own high-quality silicone and necessary tools. Ensure a clean and professional finish. Access and Timing: Flexible with timing—let me know your availability to arrange access. Budget: Open to quotes, including labor and materials. Let me know if you have any questions or require more details about the task!

Sliding door to bathroom seems to have slipped off hinge and now has a lot of resistance when opening. Need help to place this back onto the hinge to slide correctly.

VW Tiguan left side doors need repairs. See pictures. - Due date: Flexible