How to clean and sharpen your garden tools

An easy way to maintain or raise the value of your property is to ensure your garden or landscaping is in tip-top shape. You can achieve this with proper and well-maintained garden tools. 

In this guide, you’ll learn proper garden tool maintenance, including how to clean and sharpen your garden tools, how to remove rust, and how to restore your tools’ edges. Read on to see how to get it done sharpish! 

What's the best way to clean garden tools?

The best way to clean your garden tools can be summed up in one word: thoroughly.  If you do light gardening work and your garden tools don’t collect much debris, you may skip some of the steps. 

Before you start cleaning your tools, prepare the necessary cleaning equipment and lubricating oils. Note that you can find these materials at most hardware stores or your favorite grocery. Here’s what you’ll need:

  • Safety gloves

  • Tools

    • Putty knife or trowel

    • Garden hose

    • Screwdriver, spanner or other appropriate disassembly tools

    • Wire wool or wire brush

    • Sand block or sandpaper

  • Cleaning materials

    • Dish soap or detergent

    • Rubbing alcohol or diluted bleach

    • Linseed oil

    • Machine oil

    • Old towel or rag

    • Bucket for cleaning

  • Storage materials 

    • Bucket for storage 

    • Sand

How do I clean my garden tools?

This guide shows you how to clean your garden tools or even clean your old garden tools if you haven’t done so yet. 

If you do light gardening work and your garden tools don’t collect much debris, you may skip some steps. Cleaning methods vary depending on how much dirt or debris is on your tools. Don’t forget to wear safety gloves while you work!


Step 1: Remove soil and debris

Garden tools dirty with soil and debris

Follow these steps to remove debris from your tools: 

  • Use a putty knife or trowel to scrape off heavy layers of dirt. Scrape off as much of this as possible.

  • You may use a sharp (pun not intended) blast from your garden hose to loosen stubborn dirt. 

  • Alternate between these two methods to remove all the soil and debris from your garden tools. 

  • For stubborn dirt, mix dish soap or a strong detergent with a bucket of water and give your tools a good scrub. 

  • Wipe the cleaned tools dry with an old towel or rag; Don’t leave your tools to air-dry as this can cause rust.  


Step 2: Remove the sap

Garden shears with sap from pruning tree branches

Your tools may have plant sap and insect residue on their working surfaces after a day of working on your garden. Plant sap can have bacteria, so always disinfect your garden tools’ blades or tines to avoid spreading bacteria or plant diseases to healthy plants. 

Once you’ve removed soil and debris from your garden tool, spray on a generous amount of rubbing alcohol or diluted bleach on its working surfaces, pivot areas, and handles. Leave the disinfectant to partially evaporate, then wipe the tool dry with a rag or old towel.


Step 3: Do a partial disassembly

Garden shears disassembled to get ready for cleaning and sharpening

This step is necessary to remove dirt or rust in hidden spots. 

  • Refer to the manufacturer’s instructions on how to disassemble your garden tools with a screwdriver, spanner or hex tool; Don’t use your bare hands as you risk misaligning the parts and damaging the bolt threads. 

  • Apply a spot of machine oil or lubricant on the pivots of your garden tools if rust makes disassembly difficult. 


If you don’t see any rust after disassembling and inspecting the parts, simply apply a bit of machine oil and rub all the surfaces down with an old towel or rag. Then, put the pieces back together. In this case, you can skip the next step and proceed with step 5.


Step 4: Remove rust

Rusty garden shovel due for rust removal and cleaning

Now that your garden tool is partially disassembled, remove surface rust with a wire brush or wire wool. You may have to run the wire brush several times over all the surfaces. Apply firm pressure and never do this without wearing safety gloves. Remember: You’re running your hand over sharp edges!

 Note: If your garden tool is encrusted with a thick layer of rust, don’t consign it to the rubbish bin! Instead, prepare the following materials to remove rust: 

  • Shallow pan or bucket

  • Baking soda

  • Water

  • White vinegar


This process is effective for cleaning most handheld, unpowered tools. What’s more, this guide is useful for knowing how to clean rusty hedge clippers. Follow these steps to clean heavy rust from your garden tools: 


  1. Fill a small pan or bucket with about 4 tablespoons of vinegar mixed with 2 liters of water. 

  2. Immerse the rusty tool in the mixture and leave it for at least 12 hours. 

  3. Retrieve the tool and use a wire brush to scrape away the layer of rust, which should come off easily.

  4. After removing the rust, prepare another 2 liters of water with 5 tablespoons of baking soda.

  5. The baking soda should form a paste. Rub some paste on the rusty surfaces, and leave the tool immersed in the water for at least an hour.

  6. Retrieve the tool and scrape off any residue with the wire brush, wipe it dry and reassemble the tool. 

Your garden tool should come out looking like it was newly purchased!


Step 5: Sanding and protecting the handles

Roll of sandpaper for sanding wooden garden tool handles

Note: You can skip this step if the tool handles are made of plastic or other synthetic material.

Now that your garden tool is clean and dry, use a medium-grit sandpaper or sand block (you can find them at DIY centres) to sand your garden tool’s handles. After sanding the handles, apply a spot of linseed oil to provide a protective layer to repel water and moisture. Leave the oil to set for a few minutes, then wipe off the excess. 


Step 6: Store tools properly

Clean garden tools stored in a metal bucket

Having a shed for your garden tools is ideal, but you’ll still need a proper container for them.


  • Prepare a bucket filled almost to the top with sand; This can be fine or coarse plastering sand. 

  • Apply a spot of machine oil on the pivot points and sharp edges of each garden tool. You may also pour some machine oil or lubricant onto the sand until it reaches a damp consistency.

  • Store small garden tools with their tines and working edges in the sand. 


Make it a habit to jab your tools into the sand bucket after using and cleaning your garden tools to prevent rust. For larger tools like shovels, hang them on a rack in your garden shed. 

Note that you can hire someone to install a garden shed if you don’t have one. 

How do I sharpen garden tools?

A man sharpening garden pruning shears

Part of proper garden tool maintenance is knowing how to sharpen garden tools. Note that this is a general guide for sharpening most hand-operated and non-powered garden tools. 

To sharpen your garden tools, prepare these items: 

  • Lubricant or oil

  • Bench vice

  • Whetstone or sharpening stone for garden tools (coarse and fine-grade)

  • Twin diamond file

  • Wire brush or wire wool

  • Water

  • Old rag or towel


Here’s how to sharpen garden tools.


Step 1: Clean the garden tool.

Prepare your garden tool for sharpening by removing rust and debris from its working surfaces. Then, remove sap by running a wire brush or wire wool on the working edges. Feel for any stickiness on the blades; If you don’t feel anything sticky, the residue is gone.


Step 2. Secure your garden tool.

Secure your garden tool on a bench vice with its blades facing upwards. When sharpening a hoe or shovel, position the tool with the bevelled side facing you. You can also use your hands, but make sure they’re dry to ensure a firm grip.


Step 3: Sharpen the blade. 

Wet your coarse whetstone and sharpen the blade with light and slow strokes. You can also use an electric garden tool sharpener. 

  • Make sure to hold the sharpening tool at the same angle as the tool’s sharp edge, usually 20 to 30 degrees. 

  • Make several strokes on the tool’s blade with the coarse whetstone, then switch to the finer grade. 

  • When using a whetstone, apply a few drops of water on the blade in-between grinding.

  • When using a whetstone, apply a few drops of water on the blade in-between grinding.


Step 4. Repeat the process until the blade looks sharp.

With light pressure, run the opposite side of the tool’s blade on the whetstone to remove burrs. 

Continue sharpening until the tool passes the “paper test:”

  • Test the sharpness of your blade by cutting a piece of paper; Be careful not to run your fingers on the blade! You’ll know the blade is sharp enough if the cuts on the paper are consistently clean and have no jagged edges.  

Then, carefully wipe the tool’s blade dry with an old towel or rag as needed, then apply a spot of oil or lubricant before storage.


Note: You will have to use the diamond file to grind on a new edge for tools that have nicks or lost their sharp edge. 

  • Make a new edge by grinding on the formerly-sharp edges at an angle of 20 to 30 degrees. 

  • Apply firm but slow strokes. Then, stop when you see a smooth, clean line on the metal.

  • Proceed with the sharpening process.   

Maintain your garden tools with the help of an expert.

With the right tools, patience, and some elbow grease, you can keep your garden lush and healthy. What’s more, you can reduce the upkeep costs of your landscaping. Properly cleaning and sharpening your garden tools is key. With the information and tips in this guide, you can keep your garden tools in working order.

But suppose you find it tedious or don’t have the time to maintain your garden tools. In that case, you can always book a garden tool sharpening service on Airtasker. You can also find someone who can help you with many other gardening-related tasks. Put up a task and get help from a specialist via Airtasker today!

FAQs on caring for garden tools

Most natural oils like linseed oil, walnut oil, or coconut oil are effective in cleaning gardening tools, as long as the oil is quick-drying. Machine oils are also a good option. Whichever type you choose, make sure to give special attention to the wood handles of your garden tool when applying the oil. Apply the oil at room temperature whenever possible, and don’t saturate the tool, so the oil dries within a reasonable time.

Yes, but using olive oil on your garden tools comes with precautions. Unlike other natural oils like linseed, olive oil doesn’t dry as quickly. To avoid the olive oil turning rancid and creating a sticky coating on your garden tools (particularly on the wood handles), apply a thin coating then wipe off any excess oil with an old rag or cloth.

Clean your garden tools after every use and wipe them dry. Rust can develop on your tools, especially if you work on moist soil. You should also disinfect your garden tools after cleaning them. Plant sap that gets onto your tools can harbour many plant diseases. You can avoid infecting healthy plants by disinfecting your garden tools with diluted bleach or rubbing alcohol.

Yes! Disposing of garden tools - even those heavily encrusted with rust - can be wasteful and impractical. Unless your garden tools have had their surfaces or moving parts rusted away to the point of making them unusable, don’t throw them away. With the right equipment, effort and a little patience, most rusty garden tools can be restored to proper working order; some tools may even come out looking like new.

Most natural oils like linseed oil, walnut oil, or coconut oil are effective in cleaning gardening tools, as long as the oil is quick-drying. Machine oils are also a good option. Whichever type you choose, make sure to give special attention to the wood handles of your garden tool when applying the oil. Apply the oil at room temperature whenever possible, and don’t saturate the tool, so the oil dries within a reasonable time.

Clean your garden tools after every use and wipe them dry. Rust can develop on your tools, especially if you work on moist soil. You should also disinfect your garden tools after cleaning them. Plant sap that gets onto your tools can harbour many plant diseases. You can avoid infecting healthy plants by disinfecting your garden tools with diluted bleach or rubbing alcohol.

Yes, but using olive oil on your garden tools comes with precautions. Unlike other natural oils like linseed, olive oil doesn’t dry as quickly. To avoid the olive oil turning rancid and creating a sticky coating on your garden tools (particularly on the wood handles), apply a thin coating then wipe off any excess oil with an old rag or cloth.

Yes! Disposing of garden tools - even those heavily encrusted with rust - can be wasteful and impractical. Unless your garden tools have had their surfaces or moving parts rusted away to the point of making them unusable, don’t throw them away. With the right equipment, effort and a little patience, most rusty garden tools can be restored to proper working order; some tools may even come out looking like new.