Find a professional The Range hanging and mounting service in Leytonstone.

E11 - Leytonstone close to Leyton Tube I have a Venetian blind above my staircase that needs hanging. I have a stepladder available and the kit I bought from Amazon comes with screws / parts.

Hi, I’ve bought a GORNATION Large Outdoor wall-mounted pull-up bar that I need professionally installed on an exterior brick wall in Leytonstone, E11. It’s for calisthenics, including pull-ups, muscle-ups and other dynamic movements, so I need it installed as a proper load-bearing fixing, not just general wall mounting.

Undermount kitchen sink is currently out. I need it resealed, clipped back up under the worktop, and the waste reconnected. Please include all parts in your quote but I think you only need some silicone! What’s involved: • Remove remaining old silicone from the sink rim and the underside of the worktop probably with methylated spirits or something similar (previous installer used an excess — I’ve already scraped off most of it) • Reseal and refit the sink, tighten the undermount clips • Reconnect the trap and the 40mm waste pipe (multifit coupling already bought) • Test for leaks Sealant is supplied — I have CT1 and a small bit of UniBond Bath & Kitchen left (not enough) which you can also use. I’d guess 1–2 hours. Please tell me how you’d approach the old sealant removal, since a bad prep job is what caused this in the first place.

Change 6 smoke alarms which are hard wired and install 4 new smoke alarms using the ceiling light connection just next to the light connection no chasing etc

2 x decorative wall lights to be hung on wall (no electrical wiring needed) 1 x mirror to be hung on wall Radiator console table legs need to be screwed in. Console table screwed onto wall.

Hang 3 framed pictures on wall in flat. We don’t have a drill or hooks.

I have a TV mount on the wall from the previous tenant, and I believe my TV fits there. However, all the screws and accessories need to be provided, and of course, the TV needs to be mounted on the wall.

Hang a mirror 80cm x 80cm - needs screws and raw plugs and a drill which I dont have

I have a 3 meter clothes rail that needs drilling into a foundation wall (so you will need an electric drill and maybe wall plugs) you will also need a ladder as this is to be hung above our chest of crawers. Thank you!

Have a new toilet seat. Need the old one removed and the new one installed.

I have a bathroom sink that's mounted on the wall. It's very heavy and started to hang off of the wall, and just got worse after someone leaned on it. I need it refixed to the wall in a way that's secure and safe.

Mount a 40 inch tv on a bedroom wall and tighten a loose bedframe

Changing 2 plug sockets Changing 2 light switches Putting up a pendant light Taking a look at a faulty floor lamp (I have all the replacement bits)

65 inch tv and I do have the wall bracket, the perfume stand to be installed on bedroom wall- it is just a case

Removing 2 x hallway lights and fitting new lights

I have some wires which need to be removed from the wall. I also need 2 sets of plug sockets installing in order to mount a TV on the chimney breast.

I want to add ceiling roses and change the ceiling light fittings 2x bedrooms.

Hang curtains in bedroom. Need to provide own tools as well as longer screws and wall plugs

I would for a 55” tv to be mounted on the wall.

Need to change the bathroom tap in the bathroom sink. Have new tap purchased. Unable to remove old tap. Water supply has already been isolated. I need help removing an existing mono mixer tap from my bathroom basin. The issue is the retaining/back nut underneath the basin — it sits deep inside the ceramic recess and access is very tight due to the basin design and pipe positioning. The flexi hoses have been disconnected. The main challenge is loosening/removing the old retaining mechanism so the tap can be lifted out. You will likely need: • A basin tap back nut spanner / box spanner • Experience working in tight under-basin spaces