Find a professional local carpenter near you

Build howdens counter cabinets just carcus no doors 12 lots available evenings aswell it’s in a shop

I need a skilled carpenter to reduce a fitted wardrobe to fit a smaller room

I have 0.5m squared of wooden floor area that needs fixing of some marks and scratches.

A part of my bed frame is broken, so it needs the wood to be fitted back

We need a custom size skirting board type or “kickboard” under our integrated appliances to prevent mice entering the flat. You’ll have to measure the gap, the distance between the cabinet feet and construct the kickboard Example in first photo (light coloured chipboard)

Design code. WTM6ML Build and configure Attach to stud walls 5 1m and 1 0.5m full height pax units

Qualified and experienced carpenter required to fit in a frame and cabinet door cut to size using birch plywood.

2x cabinets need to be built, a worktop then needs to be attached to the top, and the sink hole cut out. Then some panelled slat facia needs to be attached to the back & sides. There is then another box that needs to be built, we had the wood cut, but have had no time to put it together / paint it black if there is time. Paint would be provided.

IKEA EKET cabinets for 3 to install in my reading room

I would like to have two rectangular openings cut into the back panel of my hi-fi cabinet (photos attached) to allow easier access to cords: • Bottom shelf opening: approx. 410mm wide × 150mm high • Middle shelf opening: approx. 410mm wide × 100mm high The cut edges should be sanded smooth. The cabinet is made of mango wood, and the back panel is about 12mm thick. Please let me know if you can carry out the work on-site at my home in Enfield, or if the cabinet would need to be taken away. I am flexible on timing and happy to work around your availability. Quotes including labour and any necessary materials would be appreciated.

I am in the process of refurbishing a house, and need to replace part of a vertical skirting board.

I have a wood pole that needs to be propped up from underneath. Or a piece of wood on the top. I’m looking for a quick temporary solution. Needs to be done by tomorrow 5pm Thanks

Need support in fitting fittingly furniture. Might need to cut certain pieces as some is slightly longer Essentially a cabinet with some shelves and one drawer to fit into this nook

Looking for a joiner to install banquette seating in kitchen corner, and remove existing breakfast bar. Also to install shelving in living room alcoves. Small residential project but may be more scope for future projects as I am an interior designer. Please see my profile for further details. Please quote below or contact me. Thank you!

Apply good carpentry and furniture manufacturing knowledge to: - take 4 solid oak legs (see photo) - router the top out according to specs at R100mm radius (see specs) - Apply R50mm edge blend to 90 degree edge Designer and business owner with more jobs on the way - looking for a long term partnership with many more high end projects with anyone who has high attention to detail, care and skill for high end furniture prototypes!

Hi, I am looking for someone who can sand and polish a small patch on my wooden table.

We’re looking for a carpenter or maker to help build three chairs based on some attached plans. This is a fun, light-hearted project — the chairs are for casual use around the house or garden, and we’re not being precious about the outcome. We’re imagining a simple build using pine or plywood. They don’t need any fancy finishing — just sanded enough not to be rough to the touch. Raw, honest construction is part of the charm. What we’re looking for: – Source and supply the wood (ply or pine) – Build 3 chairs from the plans – Sand to remove roughness (no paint or finish needed) – Ideally deliver to Tunbridge Wells (or we can arrange collection) We’re open to suggestions or tweaks if they help make the build easier.

Demolish and completely remove from the property a wooden shed. I can then help clean the concrete base and surrounding area before you construct my new shed. It’s a Keter Darwin resin 6x4 tongue and groove easy fast assembly shed with a floor panel. H:205 x W:119 x D:184.5. Combined weight of the panels = 61 kg. I’d also like some old items from the shed taken away such as a couple of hoses, a large garden parasol, etc. Those are the big items, the others don’t weigh much.

I need 1 extra person to help assemble a wooden 6x4 shed and fit a cat flap on it on the same day.

Clean all mold/mildew to bathroom ceiling , scrap off all loose or flaking paint , fill and make good where required , apply stain block and matt emulsion