Find a professional fitness equipment installer in West London

I'm purchasing a Bulldog Gear Zero 2 PLUS cable machine, which weighs approximately 250 kg. The machine will arrive fully assembled as one large package, and the courier will only deliver it to the kerbside. I need experienced professionals to: Safely move the 250 kg machine from the kerbside into my home gym. Position it correctly against the wall. Securely mount it to the wall using appropriate heavy-duty fixings. Ensure the machine is stable and safe to use. No assembly is required. Due to the weight, this will likely require multiple people and specialist moving equipment. Please only respond if you have experience moving very heavy equipment and installing wall-mounted gym equipment. I'm flexible on dates, as delivery hasn't been arranged yet. Please provide a quote and confirm how you would safely move the machine. Important Because it weighs 250 kg and is already assembled, I'd strongly recommend hiring professional equipment movers rather than a general handyman working alone.

Technogym kenisis machine set up, just need someone to put front sections together

I have a Strongway 100KG multi-gym It's going into a ground-floor room/office. I need full assembly including the weight stack, cables and pulley system.

Insert 2 blind internal spring pins into a Primal gym rack. Kingston upon Thames, England Hi there! I need a local handyman to help fix a specific, tricky component on an already-assembled Primal Performance V2 Half Rack in Kingston upon Thames. The gym rack is 99% fully built. The only job is fitting the spring pop-pins into the overhead rotating pull-up handles. The Challenge: The overhead steel frame is a completely enclosed box section. To fit the pin, a solid metal locking block has to be pushed in blindly from the back of the handle slider block, lined up perfectly with the internal tracks, and then held steady while the spring-knob head is screwed onto it from the front. What is needed: It requires a bit of patience, a steady hand, and a thin tool or guide wire (like string, a long thin screw, or thin pliers) to prevent the block from slipping inside the enclosed frame.The heavy lifting is completely done; it is just a fiddly alignment job.It shouldn't take more than 15 to 20 minutes for someone with the right approach. Please let me know your availability. Thank you!

link for the product https://www.argos.co.uk/product/6207467?utm_custom6=PLA&deeplink=true&gclsrc=aw.ds&&cmpid=GS001&_$ja=tsid:59157|acid:629-618-1342|cid:20368875273|agid:|tid:|crid:|nw:x|rnd:930183884873562078|dvc:c|adp:|mt:|loc:9046081&utm_source=Google&utm_medium=cpc&utm_campaign=20368875273&utm_term=6207467&utm_content=shopping&utm_custom1=&utm_custom2=629-618-1342&GPDP=true&gad_source=1&gad_campaignid=19672026602&gbraid=0AAAAAD9II9lr6xX7EybyFRuMHcDeLS01F&gclid=CjwKCAjwiL7VBhA-EiwAhZi9EFFGfiN2RdfI12IRpEckjdR5q3Xkf2LwosfQdMs84MX9kkPYfiLjIxoCziYQAvD_BwE

Hi there! I need a local handyman to help fix a specific, tricky component on an already-assembled Primal Performance V2 Half Rack in Kingston upon Thames. The gym rack is 99% fully built and ready to go. The only job is fitting the spring pop-pins into the overhead rotating pull-up handles. The Challenge: The overhead steel frame is a completely enclosed box section. To fit the pin, a solid metal locking block has to be pushed in blindly from the back of the handle slider block, lined up perfectly with the internal tracks, and then held steady while the spring-knob head is screwed onto it from the front. What is needed:It requires a bit of patience, a steady hand, and a thin tool or guide wire (like string, a long thin screw, or thin pliers) to prevent the block from slipping inside the enclosed frame.The heavy lifting is completely done; it is just a fiddly alignment job.It shouldn't take more than 15 to 20 minutes for someone with the right approach. Please let me know your availability. Thank you!

2 Gym mirrors that need to be mounted to in house gym wall.

I have ordered a gym rack and rubber flooring (to put on top of our flooring to create a home gym. I need help setting this up https://mirafit.co.uk/mirafit-m3-folding-wall-rack.html?gad_source=1&gad_campaignid=24134427009&gbraid=0AAAAADKKnjn8-JWKSbYxrD0lF7UBvXTsI&gclid=CjwKCAjwwL_UBhAjEiwAEhuT5CKIf1rfREgZb66XQPYP728iS2iRwSmqROiOqgOKKy3rFv-RZjgzDBoCLE8QAvD_BwE#446=6784&447=5439

Bought a multigym and it’s currently on my driveway need it moved into the gym and assembled asap please

Im planning to use the garage as a gym. I would need followings to be done; 1- put together gym floor mat, the one im planning to buy is; https://www.gym-flooring.com/products/20mm-sprung-pro-gym-flooring-highest-rated-in-uk-heavy-duty 2- put together a squat rack, the one i bought already is; https://www.fitshop.co.uk/bodymax-cf475-power-rack-sebr3428 3- can put together few mirrors, the garage currently is just in bricks, so might need a power drill?

Gym flooring to be laid, including prepping the existing floor. Area is not massive, 5m x 2.7m. I will supply tiles.

I have an order of exercise equipment with the main items being a rep PR 5000 rack and rep Arcadia. Also have some adjustable dumbbells and adjustable bench and a few other smaller items. Need the main ones installed and securely bolted into floor if need be. Installation is in my garage on ground floor.

Assemble Marcy hg3000 multi gym in our garage

Assemble home gym 1/4 already done

The weld has come loose of this pice of equipment. Need it re welding Asap pls

https://www.vulyplay.com/en-GB/monkey-bars/quest-2/medium It’s this

Assembly of brand new gym equipment Marcy HG3000 - multi gym machine

Got a muti gym. Got it completed upto 70%. Need someone that can the cables for me

assembly of a compact multi gym into my shed

Hang a Gym Master pull up bar to an outside wall and a Beastmaster 1000 series hang board to an inside wall.