A male architect working on blue prints of a project build.
A male architect working on blue prints of a project build.

Find an experienced local architect near you

Fill in a short form and get free quotes from experienced local architects

4.3

Excellent rating - 4.3/5 (9300+ reviews)

For your building project

  • Residential architects near you
  • Loft conversion
  • Garage conversion
  • Attic conversion
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated architects near me

Recent Architects reviews

Russell did an excellent job of building our Ikea wardrobes. I would highly recommend him.

Build IKEA wardrobes - 2 x 100cm and 1 x 50cm PAX design

£100

Great professional service I was very impressed with the stunning decoration ideas Highly recommended

Interior design for 2 bedroom flat

£100

Excellent service!

King Size Bed assembled - simple design TODAY

£45

Was prompt, clean , brilliant job.

Building a 3door wardrobe

£40

Juraj's work is professional. He installed a 3 door wardrobe for us. He had familiarized himself with installation manual and ensured the assembly was smooth. He even attended to level the doors to perfection. Thank you Juraj.

Assembling 3door wardrobe which needs to be fitted on the wall

£40

Great job. Friendly guy. 100% recommend Metin.

Locksmith to change unusual designer door handles in Shoreditch

£50

low

£37

median

£99

high

£150

Low, median and high bar chart distribuiton

Average reviews for Architects Services

based on 21 reviews

5

21
0
0
0
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

28+

Tasks successfully completed

2

Average amount of offers per task

51

 mins

Average time to receive offers

Statistics from the most recent tasks on Airtasker over the last 4 years.

Why book a local architect through Airtasker?

There’s nothing like the bliss that comes with planning for your new home. But as much as it’s fun to take everything under your control, it’s wise to work with a professional architect to pull off the project, plus make sure it’s safe, up to code, and visually enticing!

With Airtasker, you can link up with an architect with the right education, skills, and experience to make your vision come to life. This platform can be helpful especially if it’s your first time to have a home (or even a commercial building) designed and you’re unsure where to begin.

Skip the hassle in posting online ads or travelling to architectural firms. In finding a Tasker, you can take the initiative in laying out your budget and schedule. Ratings and reviews are also available to ensure satisfaction. The suitable residential architect near you is just a few clicks away.

Find insured architects

Because of the importance of an architect’s work, it’s vital that they’re fully insured. All tasks on our site are covered for up to $10 million third party liability.

Get the best architects in your area

After each completed task on our site, you’re given the option to rate and review your worker. You’ll be able to easily compare local architects who have completed a project and see what others think of their work.

Don’t break the bank

Building projects are expensive pursuits, however on Airtasker you set the budget. When you post your task, you say how much you’re willing to pay and local architects apply based on that figure.

Easy research

Rather than going out to find and compare architects, Airtasker brings professional designs straight to your inbox.

Top Architects related questions

In the United Kingdom, architects’ professional fees depend on how they want to charge you—percentage or fixed.


They can also charge through a percentage system, asking for 5% to 12% of the house’s total cost. An architect's cost can range from £1,000 to £5,000 and depends on the project you need.


Your project’s complexity, location, Tasker’s experience, and more also greatly affect the final rate.

It is ideal to hire an architect first before a builder. You can also hire them at the same time upon the start of the project. This is to avoid having design plans that will cost more than your allotted construction budget.


When posting on Airtasker, you can ask for a residential architect who has a builder to recommend. Or, you can put up a task for a builder right after you make one for an architect.

An architect focuses on the design, look, and style of a structure. Meanwhile, architectural engineers are more concerned with making sure that the structure is sturdy and meets the needs of its occupants. Back in the day, architects practised both disciplines, but these are sometimes considered separate specialisations today. 


A tasker can be a good mixture of both as well—someone who knows about good design as much as knowing where to place load-bearing walls and electricals.

Technically, yes, you can draw your own architectural plans with the help of some architectural software or drafting tools and paper. However, hiring a professional will offer an entirely different process and experience. For example, working with a residential architect can optimise your space based on your lifestyle and needs, creatively maximise your materials, and help you pick out energy-efficient fixtures. Plus, your residential architect can take on the tedious daily task of coordinating with a contractor.

The duration mainly depends on how intricate your project is. If you’re requesting a simple home design or one that’s meant for a limited commercial space, the job can take two to three weeks. As for the more complex ones, allot at least a month.


If you’re feeling more adventurous—such as involving 3D rendering and a 3D video walkthrough, that can add another two weeks or more to complete. It’s best to discuss your needs to your architect or designer for a better estimate.

To have a better grasp of their service, you can ask these to your residential architect:

  • How much time will I need to commit during the entire process?

  • How can I help?

  • Have you worked with projects (and budgets) similar to mine?

  • What are the issues or challenges of my project?

  • Can you give me a rough timeline of the project?

  • Do you have a recommended contractor or builder?

  • Can you help make my building more eco-friendly or reduce the environmental impact of the construction project?

Apart from a degree in architecture, the requisite licence and experience, look for an experienced architect with an attractive portfolio. Try not to choose an architect whose style may clash with yours, unless they are open-minded. They should have a balance of creativity and a rational mind to accept criticism. Excellent problem-solving skills—that can help them adapt to any unexpected issues and keep the project moving—are also good to have.

In checking the floor plan, consider your daily activities. Does the plan provide efficient flow and convenience? For example, does the floor plan make it easy for you to park your car, take groceries into your kitchen, then prepare a meal? Is it easy to move through your living room and dining area? If any of these seem difficult to do with your current floor plan, ask your residential architect or designer to help you make the appropriate changes.

What do architects do?

A range of architectural services are at your fingertips, thanks to Airtasker. Ensure that you achieve the quality and beauty of a property you’re about to have, whether it’s a commercial space or your own home. 


Some architects help you manage your project’s different stages and requirements, from inception to completion. The process typically includes the consultation, design development, finalising permits and zoning concerns, and production of construction documents. 


Dive deeper into the service here:


Architectural rendering and visualisation

Your architect guides you from the ground up. They can help you  design your home or commercial space, which includes making a 3D rendering of your design. 


The Tasker can work on making your design aligned to your needs and tastes while following building codes, safety standards, and industry best practises. Some can even provide you with a 3D video where you can walk through the design—you can take a peek into how it might look after construction. Then if you’re a realtor, you can make the 3D rendering viewable online for potential clients to view.


Building designers

Need to put your design down on paper for reference and documentation purposes? You can work with a building designer. This is also an ideal step if you are already an architect or have engaged local architects.


The building designer can offer an accurate architect drawing and schematics of your design that comply with building codes, safety standards, and state regulations.


Residential architects

Whether it’s for building single-family homes, high-end homes, flats, condominiums, apartment buildings, or townhouses, residential architects near you are convenient to connect with on Airtasker. These speciality architects can propose designs that match your needs, tastes, and budget while abiding by building codes and regulations.


A residential architect may even specialise in certain kinds of design like colonial, contemporary, and more. 


Interior architects

If your home or commercial building’s basic structure and design are already ready, you can link up with an interior architect. They can design your property’s walls, doors, windows and fixtures. Note that an interior architect is the more technical architect who handles the design layout and installation of electricals, plumbing, heating and cooling systems.


Your architect can also recommend the appropriate materials and techniques for installing each system. You can hire an interior designer to beautify the space after their work is done.


Home renovations

If you’re looking to making changes in your home, there are architects who can lend a hand in renovating and refurbishing. These jobs include loft conversion, garage conversion, basement conversion, and house extensions. Depending on the nature of your renovations, your architect might help you get someone to lay new foundations, put up new walls and do site cleanup.


Floor planning

A floor plan can determine how your walls, rooms, fixtures, and other physical features contribute to flow and how they look in your design. A good floor plan aligns with your needs and tastes, maximises your space, and follows building codes, safety regulations, and best practises.

Recent Architects tasks

Bedroom interior design

£10

Oxhey, Hertfordshire

7th Sep 2025

Would like ideas for layout new bed desk wardrobe mirror etc for the bedroom room makeover complete transformation

Wall Painting with Colour-Block Design + Repairs, TV Removal & Repaint

£300

Shephall, Hertfordshire

6th Sep 2025

Hi there, I’m looking for a skilled painter/decorator to help refresh a bedroom with a feature wall design and a full repaint. Scope of work: • Recreate a colour-block design (large arch/semi-circle feature wall, see reference image). • Background in terracotta/clay. • Arch shape in sage green. • Repaint the rest of the walls in fresh white for a clean finish. • Add a half-painted sage green section on the right-side wall, continuing up to the door. • Fill and repair all existing holes in the wall to create a smooth surface before painting. • Remove a wall-mounted television and make good the wall where it was fixed. • Ensure clean, sharp paint lines and a professional finish. What I’ll provide: • Paint colours (terracotta/clay, sage green, and white). • Reference images for exact design and placement. What you’ll need to bring: • Painting tools, rollers, brushes, tape, filler, sandpaper, etc. • Expertise in neat shapes/lines and colour-blocking. Room details: • Standard bedroom size. • Feature wall approx. 230cm wide. Looking for someone with experience in decorative/feature wall painting who can deliver a crisp, professional finish. Thanks!

Build ikea wardrobe design code WCWQ3Z

£50

Mill Hill, Greater London, NW7

3rd Sep 2025

Build ikea pax wardrobe for child’s bedroom and build in

Desk design & build

£500

Woodford, Greater London

3rd Sep 2025

To design & build a desk with drawers etc for a teenagers bedroom.

IKEA PAX wardrobe assembly: design WGYN87

£50

Ancoats, Greater Manchester

2nd Sep 2025

I need somebody to assemble my new PAX wardrobe from IKEA. Design code: WGYN87

Looking for Interior Design Agencies

£10

Elephant And Castle, Greater London, SE1

31st Aug 2025

Looking for Interior Design Agencies to work with.

Neiden bed frame, Pax/Grimo wardrobe, Havsta storage and Malm 3drawsX2

£100

Shepway, Kent

30th Aug 2025

Neiden single Bed Frame Malm 3 chest of draws X 2 Pax/Grimo wardrobe Havsta Storage

Interior Design

£100

Tulse Hill, Greater London

27th Aug 2025

Hi, looking for an interior designer to chose a carpet/runner to go with this hallway colour style and some affordable artwork for walls and some hallway furniture. It is a communal hallway to 6 flats. Also possible work inside one of the flats to advise on best next steps/preparation for renting/sale

Interior design

£200

Tulse Hill, Greater London

27th Aug 2025

Repaie/renovate stairs ready for a runner to be laid.

Adhesive plastic 3D wall panels in child's bedroom

£100

Hackney Marsh, Greater London

27th Aug 2025

To install 3D wall panels on a childs wall approx 7-10 sqm Panels already arrived Need adhesive, but can order with guidance on size required Panels example: https://www.amazon.co.uk/dp/B0DG82K5L8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Install washing machine and dryer.stack ,place on the designated area

£100

Springfields, Staffordshire

20th Aug 2025

Install new washing machine and dryer

Fit some blinds - [email protected]

£10

St George's, Greater Manchester

18th Aug 2025

fit one set of blinds to property in manchester, then more work to follow

Office interior design

£50

Slough, Berkshire, SL1

16th Aug 2025

I have a 3 meter by 3 meter office I would like to design with new furniture.

Bathroom design work and Kitchen

£125

St Ann's, Nottinghamshire

16th Aug 2025

I’m looking for an experienced contractor to add finishing touches and ensure all cuts are to size and fits perfectly. Please note I’ll like to see links to your website. Please note agreed materials ahead of time I am happy to purchase myself Bathroom - [ ] Pipework covering, cut seamlessly according to size (including square cuts and rounded where toilet is) - [ ] Pipework covering where necessary seal off (around toilet area) - [ ] Grey trim B&Q around tile edges (all sides in bathroom) - [ ] To decide - whether tile to ceiling edges are finished off with grey trim or white “glue like substance” Kitchen - Remove kitchen unit that is faulty - Paint new kitchen unit with draws - Install 1 new kitchen unit

Quote Request – Wall Design & Panel Installation (BB3)

£300

Eccleshill, Lancashire

11th Aug 2025

Hi, I’m looking to get a quote for wall design and wall panel installation in my living room (BB3 3SW area). I’ve attached photos of my current home along with a reference photo of my dream design for your reference. Please let me know your estimated cost and availability.

Need help with interior design

£5

Beddington Corner, Greater London

11th Aug 2025

I want interior design for my house in terms of wall art and ornaments/vases

CAD design for outdoor kitchen

£200

Burscough, Lancashire

6th Aug 2025

Lookign for someone to do a CAD design, for lazer cutting of an outdoor kitchen

Pax wardrobe making design code is W3D4NG

£200

Ben Rhydding, West Yorkshire

4th Aug 2025

Pax wardrobe making 2 m wide

Clone an existing gear into CAD for 3D Printing

£30

Northwood, Greater London, HA6

19th Apr 2025

I have a robot vacuum cleaner with a gear that keeps breaking — unfortunately, the manufacturer only sells the entire motor + gearbox as one unit, which is costly. This is the second time this gear has failed, and I'd like to avoid buying the whole assembly again just for one broken piece. Instead, I’d like to replicate the gear in CAD so I can 3D print replacements as needed. I'm a complete beginner when it comes to CAD, so I'm looking for someone to help me with modeling this part accurately. I can provide clear photos of the broken gear and anything else you need — I’ll just need your guidance on how to take accurate measurements or any other info you need to get the job done.

Great! Very happy with everything.