Hire a professional washing machine services in Central London

the washing machine cable is broken needs to be replaced

We need two jobs done please: 1) drill a coat hooks to the wall; 2) drill washing machine door on. See pics. Thanks

Replace the door seal for washing machine

Cooker and washing machine installation. There is a washing machine and cooker already in place therefore essentially replacing the current ones with new ones.

Need filter removed cleaned and reinstated. It's stuck

My washing machine has started making a really loud noise during the spin cycle. It was working fine before, so something's changed. I'd like an experienced engineer to come take a look, figure out what's causing it, and fix it or if bigger problem let me know what's involved in fixing it (parts, cost, etc.).

Hoover H-WASH 300 washing machine showing E03/E20 drainage error. Water was manually drained from the pump/filter area, but I did not fully remove the filter because it was difficult to refit previously. Looking for someone experienced with washing machine repairs to inspect the drain filter, pump and drain hose, and advise/repair if a part is needed.

Aeg washing machine has stopped draining

Washing Machine not running - F9 and E2 flashing

Hi, I need someone to remove a broken integrated washing machine and prepare the space for a replacement freestanding washing machine. The existing machine is an integrated Candy washing machine fitted under the kitchen worktop. Appliance installers have advised that they cannot remove the integrated unit themselves and have asked me to arrange this before they can install the new machine. The job would include: • Disconnecting and removing the existing integrated washing machine. • Checking the clearance under the worktop and removing or adjusting any trim, panel, bracket, or fitting above the machine if required to allow a standard freestanding washing machine to fit. • Taking away and disposing of the old machine. • Leaving the water, waste, and electrical connections ready for the new appliance installer. I can provide photos of the current setup below. Please let me know if this is something you can do and provide a quote if possible. Thank you.

My Hotpoint washing machine has f05 showing and it’s not draining. I need it fixed today is possible, please.

Looking for a plumber to install a proper cold water feed valve for a washing machine. There is an existing cold water pipe in place, but it does not currently have a standard threaded outlet suitable for a washing machine hose. The job is to fit a suitable isolation valve with a 3/4" threaded connection. The waste pipe is already in place. Access is straightforward (see photo).

Washing machine belt recently replaced but moving out of position and causing a rubber smell, need someone to diagnose and fix.

Washing machine drain requires unblocking by specialist (currently causing leak into downstairs flat ). Flat is in London bridge

Received a new washing machine in my new flat need help to install it.

I need a section of the skirting board in the kitchen cut out to be able to remove the washing machine which is currently integrated so we can install a freestanding one. need the sides where it has been cut left neatly and not rough.

Washing machine leaking, unsure why

Washing machine SMEG WDI14 C7

help to Carry new washing machine next door about 30 yards and and then up to the first floor, and then help to install correctly