Hire a professional washing machine services in Central London

I had a new washing machine delivered to be installed but due to the way the old one was installed the company couldn’t install (it needs someone who is able to deal with the cabinetry around it and put it back together once it’s successfully been remover and the new one in place). The washing machine doesn’t need to be got rid of if not possible.

I need my washing machine installed

I am having my floor replaced. I need a washing machine to be disconnected, lifted (not dragged) into another room and then lifted back and re-plumbed a few days later.

The cut off valve for the washing machine leaks water when you try to turn it off. Probably seized from the hard water. Needs replacing before I change the washing machine.

New washing machine was installed but is not draining when we ran a test cycle. To fix drainage please!

Washing machine in a rented flat in Streatham (SW16) is leaking from the back when it drains. It runs and washes fine, but water is escaping during the drain/pump-out, and it has come through the ceiling into the communal hallway below, so it's urgent. The machine is currently out of use. Machine: Beko WTK84011W, 8kg, 1400 spin, white (freestanding, bought from Currys in April 2024). Looking for a washing machine repair engineer or experienced handyman to: - Diagnose the leak (possible blocked filter/drain pump, loose or split drain hose, or waste/standpipe connection) - Fix it on the spot if possible, or quote for parts and a return visit - Check for any obvious water damage around the machine and let me know what you find I'm the landlord, and I'm overseas, so the tenants will let you in. Please send photos of the problem and of the fix when done. Happy to pay a call-out/diagnosis fee if the machine turns out not to be worth repairing.

Washing machine in a rented flat in Streatham (SW16) is leaking from the back when it drains. It runs and washes fine, but water is escaping during the drain/pump-out, and it has come through the ceiling into the communal hallway below, so it's urgent. The machine is currently out of use. Machine: Beko WTK84011W, 8kg, 1400 spin, white (freestanding, bought from Currys in April 2024). Looking for a washing machine repair engineer or experienced handyman to: - Diagnose the leak (possible blocked filter/drain pump, loose or split drain hose, or waste/standpipe connection) - Fix it on the spot if possible, or quote for parts and a return visit - Check for any obvious water damage around the machine and let me know what you find I'm the landlord, and I'm overseas, so the tenants will let you in. Please send photos of the problem and of the fix when done. Happy to pay a call-out/diagnosis fee if the machine turns out not to be worth repairing.

To unblock a drain pipe. As washing machine water is coming out of the bath.

Hi, I need an experienced appliance technician to fix my Hoover H-Wash 300 washing machine (purchased in July 2023). • Issue: Last night it stopped mid-cycle with an E08 error code. Today, it powers on and the door opens fine, but the drum won't spin at all but does not show the E08 error . • Location: Golders Green / NW11 • Budget: £75 (Labour only). If any parts are required, I will pay for the parts separately.

The washing machine macerator is in cellar and is overflowing into cellar causing standing water - will need emptied and then use drain cleaner in bathroom sink which appears blocked

I need a new seal fitted on a hot point washing machine. I’ve already bought the seal, I just need it fitted.

I’ve recently had a new Hoover integrated washing machine installed (model HBWS 484DMBW5-80) and need my existing kitchen cupboard door fitted to it. The new washing machine has hinge mounting points in slightly different positions from the previous machine, so the existing hinge holes in the cupboard door may need to be repaired and new holes drilled. I have the manufacturer’s installation template, hinges, screws and other fittings. The job involves: * Checking the existing and new hinge positions. * Repairing the existing hinge holes if necessary. * Drilling new hinge recesses if required. * Fitting and aligning the cupboard door with the surrounding kitchen units. Ideally looking for someone experienced with integrated appliance doors or kitchen cabinetry who has the appropriate tools. Photos included showing the existing door and new washing machine.

Washing/drying machine has stopped spinning. Need inspection, diagnosis and potential repair if possible. Price for inspection/ diagnosis. Repair done separately if possible.

Needs 2 man team. Remove internal door from hinges (unscrew) Carry down 5 steps new washing machine to basement and connect (no plumbing necessary) Re-screw door back on needs 2 people to carry washing machine 5 steps down, everything ready to install new parts needed.

* A suitable hole/core drilled through the external wall behind/near the washing machine. * New waste pipework installed from the washing machine through the external wall. * The pipe to run externally to the existing drain/gully, which is approximately 0.5 metres from the washing machine. * All necessary additional waste pipe, fittings, bends, connectors and fixings supplied and installed. * Correct fall on the new waste pipe so that it drains properly.

It’s a small job, I’m looking for an appliance repair technician to fix my Hoover washing machine (model DXOA 48C3B/1-80). It switches on, but the door is stuck locked and won’t open. Location: Wandsworth, London SW18. Please include your availability and estimated cost

Washing machine seems to be blocked as it has filled with water while washing sheets. Needing someone to come and help drain it please. Needs to be before lunch time Sunday.

The door on our Hotpoint WTF 722 washing machine is jammed and won't open. We need someone to attend today urgently and safely open the door without damaging the machine. Please include your availability and price.

Hi, I need someone to remove a broken integrated washing machine and prepare the space for a replacement freestanding washing machine. The existing machine is an integrated Candy washing machine fitted under the kitchen worktop. Appliance installers have advised that they cannot remove the integrated unit themselves and have asked me to arrange this before they can install the new machine. The job would include: • Disconnecting and removing the existing integrated washing machine. • Checking the clearance under the worktop and removing or adjusting any trim, panel, bracket, or fitting above the machine if required to allow a standard freestanding washing machine to fit. • Taking away and disposing of the old machine. • Leaving the water, waste, and electrical connections ready for the new appliance installer. I can provide photos of the current setup below. Please let me know if this is something you can do and provide a quote if possible. Thank you.

My Hotpoint washing machine has f05 showing and it’s not draining. I need it fixed today is possible, please.