Find a drywall repair professional near you

accidentally drilled a screw into a power cable inside a stud wall, which initially caused the circuit to trip. I have already cut open the drywall to locate the issue, so the damaged wire is fully exposed and ready for fix (see photos). power is currently back on after removing the screw, but we switched off now to fix the wire insulation. We need electrician to repair the damaged section (likely with a junction box ) and safety test the circuit. Thanks

install a metal curtain on drywall in bedroom

Looking for an experienced installer to supply and install two child safety gates — one at the top of stairs and one at the bottom. Staircase has drywall on one side and glass balustrades on the other, so the solution must be suitable for glass (no drilling into glass panels). Gate requirements: • Retractable mesh safety gates • One-hand operation • No bottom bar / no tripping hazard (floor-flush design) • Suitable and safe for stair use (installer to confirm suitability) • Appropriate for toddler use Scope: • Vendor to supply gates, hardware, brackets, posts, spacers, and fixings • Professional installation with clean finish • Installer to measure on site and confirm suitability before install • Gates to be secure, level, and safe Please include in your response: 1. Gate brand/model you propose supplying 2. Experience installing with glass balustrades 3. Mounting method for drywall + glass 4. Total price (supply + install) 5. Availability Photos and measurements available on request.

Ripped paint off wall in one room, multiple small patches. And one small hole in wall. Need as seamless paint over as possible

Patch and paint small hole in drywall Hole: approx 20x20cm Standard drywall/gyprock We have the paint No need multiple visit I can paint once it dries

The bracket of a roller blind has been pulled out twice due to winding the blind up and down. The holes that the bracket screws into have become large and have started to crumble. We would like to reinforce that part of the drywall so that the screws can stay in place.

Temporary cosmetic patch and paint of roof drywall from leak ( leak is fixed) before Xmas. We have the necessary paint. Fuller drywall job to be completed in 2026. Low ceiling with easy access. Key for scale

Light fitting has come out of the drywall ceiling. New exhaust fan/light needed and re-fitting as screws no longer hold. Has previously been attempted by previous owners with no more nails to no success.

The bed knocked the wall on moving and put a small hole in the drywall. Needs repair before I vacate the rental.

Need 6-7 small torn drywall patches repaired

I have a hole in my drywall in the living room that I need patched up

Repair 2 X small holes in internal wall (residential). No painting required. We still have cut out pieces if needed.

Garage interior roof drywall repair. New hot water flue required drywalll to be cut and removed. It is fire resistant drywall. Job is to repair. and grout to paint finish. Actual painting can be included or excluded. Dimensions: width of repair 470mm, length 8m

I have a small dent in a wall that needs to be repaired (about golf ball size) and a couple small dings in the wall from moving furniture. Hoping someone that knows what they’re doing can patch them up for me before I move out.

Hi there, we have about 10-15 minor holes in our rental drywall left from art hooks. Hope to have these repaired and then paint the wall.

Mount new IKEA besta tv cabinet to dry wall and mount TV. The TV is a Samsung 65 inch the Frame. Cabling to be flushed into the wall if possible.

Fix the two holes in drywall, one large on small, ready for painting

The damaged area is around 2ft x 1ft. Need it repaired asap. Help can be given.

Demo and replace section of drywall that my dogs have eaten Drywall is about 1cm thick, area to be replaced is approx 1m2. Will need own tools and supply the drywall No need to redo render Anytime on weekends or after 4pm weekdays

I need a small inspection cut made in my drywall/plasterboard to check for possible moisture/mould inside the wall cavity. Cut should be around 10–15cm square (enough to inspect behind the wall). Tasker will need to locate wall studs first to ensure the cavity section chosen is not on/near a stud. No need to patch/repair afterwards (just the cut and leave the off-cut piece).