Find affordable Tradies for any job in Castle Hill

Main door swollen hard to close.Sliding awning door comes off all the time

Replace awning vinyl material on a jayco 17ft expanda

Awning is 3 metres wide and extends out 2.5 metres . It is a Instahut product. Frame is aluminium. It comes with all fittings

The pivot arm has come away from the brick wall as the screws have broken and fallen out. The wall anchors are still in the wall, so will need to be removed and replaced. The screws are missing as well. Both of these will need to be supplied. The awning is on the second floor, but there is easy access from the bedroom through the window. Someone is usually at home most days, so flexible with times and days.

I have a hole in my drywall that needs to be fix ASAP don’t worry about the paint just the wall

I need someone urgently to remove an aluminium roof from a veranda (which is elevated ) and then discard at tip or somewhere. T The roof is fixed on by bolts to the facia and is supported by metal posts which will need to be cut as well. This will require a couple of pple to do this job. The roof is approx 6m*3m

Need someone to Install a folding arm awning (supply and install). If you can provide a quote.

I need a balustrade constructed in Steel or Aluminium. It has to be low maintenance, easily cleaned and stain resistant. Please reply with an estimate quote and its essential that a start time and an estimate of time it will take to deliver and install. I have just placed an exploratory budget for now. I have attached photos: The step tread is 26cm. The balustrade will in the middle: starting from the tiled deck to the lowest step.

Required as shown in the photos - 7 steps - 1m landing - 9 steps - 2m landing Stainless steel with wire, Approx 7.6m total length. The area will be made completely ready. You just need to measure, manufacture, deliver and install. Showing a few images of what’s required as a guideline, but open to suggestions. Moreover, there is an additional front pergola and back pergola balustrade to do once this is finished comprising of another 15-20m

Require mounting of awning and brackets to brick work above window height. Ladder available. Refer attached pictures. Flexible on dates.

Hi, Looking for an experienced painter to repaint our verandah ceiling and 2 internal garage walls over the weekend at some point. 1 x verandah ceiling. Already plastered so just a prime and paint needed - see photo 2 x garage walls - see photo Plus some touch up areas around the home. Paint can be supplied if required.

Install an awning into brick wall. [Content Moderated]

Hi, I'm looking for a handy person to help remove some old, ugly looking awnings from the front of my house. There are four of them (two hanging from bedroom windows and two hanging from the balcony ceiling edge). They've probably been there from the 90s (possibly earlier). Would like to remove them completely. No tip trip necessary as we'll dispose of it ourselves. Thanks.

To be mounted on the wall

I have a registered box trailer 6x4 and would like walls built with metal sheets and a back door. Walls need to be 1 metre to 1.2 metres high. I have attached a picture that I want it to look like (I want the walls a little higher than this picture). NOTE: I do not need a roof. I do not need painted. NEED: 3 sides, 1 back door, approx 1 metre high. I am quoting $100 to set the job up on here. I will up the price once a quote has been accepted and agreed.

Strong wind unscrewed the awning on first level of the house. The awning has to be screwed back & the fabric to be realigned. The awning is located outside a bedroom on the 2nd level.

A 3x6m wall to be cladded with thin bricks as photos. I also need to lay a sound proofing layer of thin panels underneath.

I will attach an image of exactly what we are after - we were going to do it ourselves but need it done fast so looking for a professional to build and install for us.

Hi in need of outdoor non slip tiles to be supplied and installed. Approx 5sqm with stairs Not sure on cost?

Installing a 300cm X 60 cm Canopy awning at the shop front door. Product Detail is http://www.canopy4u.com.au/the-frazer-outdoor-window-awning-cover-2000-x-600mm-sunsheet-cover-414.html