Find experienced local roofers in South East Perth

Routine before winter clean of gutters of house - single story (including attached patio and shed) building is approx rectangular approx 30-35m by 10-15m dimensions . You will probably need to go on the roof to do some sections. Please also take before and after pictures of the work done.

Please quote for one hour labour only. The residential property has a metal tin roof and is in Riverton 6148 Looking for a licensed Roof Plumber (WA) to inspect and carry out the following works to an existing metal roof. Work Requirements 1. Roof Fixings Replace rusted or deteriorated roof screws. Install new Class 4 rated roofing screws with neoprene washers. 2. Overflow Issue Inspect and rectify gutter overflow during rain. Adjust fall, clear blockages, or repair outlet as required. 3. Gutters & Downpipes Inspect for leaks, corrosion, and alignment. Repair or replace damaged sections as needed. 4. Roof Sheet Replacement Remove and replace one damaged roof sheet. Match existing profile and colour as close as possible.

Need help for a One off gutter cleaning

Roof is leaking and needs to be repaired

Sealing minor leakages (two spots) on a two storey colour bond roof.

Replacing slot gutters, with standard gutters 10m (Supply & Install)

I want to add a roof over the balcony on my house. The new balcony roof will need to be tied into the existing house roof.

Due to truck back it hit my roof corner and I want it to be fixed ASAP

Gutter clean small job removing leaves and sticks equipment supplied

I am wanting my gutters cleaned on my premises, single story 4 x 1 home in ferndale

Install rangehood ducting into cermaic tiled roof on single storey house

House at 10 mockeridge circuit needs gutters cleaned

Painting Job - 3 x 2 patio interior roof Interior patio roof, posts and beams painting job – approx. 3m x 2m. Seeking a qualified painter. All materials supplied. Clean down with Selleys Sugar Soap wipes and apply 3 coats of exterior paint.

Gutters of 3x2 single story home to be cleaned.

I need a muller type pvc air vent supplied and installed to my aluminium ute canopy roof for ventilation. They can be purchased from several suppliers in Perth including dunn and watson, bull motor bodies etc. Requires holesaw/pop rivets & sealer for installation.

Installing a kings rooftop tent onto a car

Roof is currently experiencing water ingress during windy rain due to deteriorated gable ends and barge boards. This task is to complete a professional inspection and provide a quote which will ensure the scope prevents any future leaks in the roof. What I had as previous scope details for reference only if helpful: - Close in two gable ends (east and west) using weather-proof cladding. - Install new flashing at the gable-to-tile junctions, installed under lifted tiles with correct lap (no surface-mounting). - Seal all new cladding joints, edges, fixings and penetrations with exterior-grade polyurethane. - Paint the gable face/barge/fascia after the work – plain white colour. - Re-seal and paint barge boards/fascias. - Chimney: clean and reseal flashing/penetrations, including lifting tiles to inspect the under-tile soakers/back-tray; quote separately if re-flash is required. - Install 2 whirly-birds on the tiled roof to provide ventilation, including proper flashing and seal around base. Property is rented so I'll help to coordinate with property manager for access (internal & roof). Conditions I'll need please: - You have your own public liability insurance. - I need a tax invoice on completion. - Work must cause no damage to existing roof tiles. - Before and after photos required please. I am open to other ideas or methods to achieve the same result - refer to attached photos.

NBN technicians advised that a conduit is required for the NBN box to be installed in a specific room. It needs to be run through the roof or along the wall. Possible 10m

I have the shade sail ready to go, set up on 3/4 points. Just need the last point attached via the D shackle and then to my roof. Everything is there ready to go. Should be less than a 30 second job. Unfortunately the only ladder I have just isn’t quite tall enough to reach the loop on the roof. Ideally if someone can come today.

A section of my roof trim has come off during the recent storm. I need someone who can fix this section exposed to look like the correct finish in the second image.