Find experienced local roofers in Manly Vale

Bathroom Tiling, Screed & Waterproofing House- Ground Floor - Approx 3.5 x 3m 1.9m to two sides of the shower. Rest of the bathroom only 1.5m high tiling 1. Surface Preparation & Screeding • Substrate Prep: Clean and prime the concrete slab to ensure maximum adhesion. • Screed Installation: Supply and install a sand and cement screed bed to the entire floor area (approx. 10.5m²). • Grading/Falls: Screed must be expertly graded to ensure a consistent fall toward the floor waste and shower waste (minimum 1:60 fall in shower and 1:100 in the general floor area). • Curing: Allow sufficient drying time for the screed before the application of waterproofing membranes. 2. Waterproofing (AS 3740) • Supply and install a certified waterproofing system. Waterproofing to be done x2 - UNDER and OVER screed. • Application: Full floor area (over the new screed and into puddle flanges), shower recesses (to 1.8m), and all wall/floor junctions. • Bond Breakers: Install bond breakers/silicone to all internal corners and transitions. • Compliance: Tiler to provide a Waterproofing Certificate / Form 16 upon completion. 3. Tiling Installation • Floor Tiling: Install Owner-Supplied tiles to the floor. • Shower Walls: Install Owner-Supplied tiles to two (2) shower walls to a height of 1.8m. • Main Walls: Install Owner-Supplied tiles to the remaining bathroom perimeter to a height of 1.5m. • Layout: All tiles to be laid with consistent grout lines (size to be confirmed by Owner). 4. Grouting & Finishing • Grout: Apply grout to all joints (color to be confirmed by Owner). • Silicone: Apply high-quality, mold-resistant silicone to all internal corners, junctions, and base of shower. • Trims: Supply and install aluminum or brass edge trims to all exposed tile edges and doorways. 5. Material Responsibilities by Tiler except Tiles

Gutter clean for top storey of house. Easily accessible from front which is 1 storey up, back is 3 storeys up. Foam gutter guard installed in gutters and needs to be cleaned

need the roof and gutters cleaned - Due date: Flexible

2 story house needs gutters cleaned and pigeon nests removed from underneath solar panels. - Due date: Flexible

Want to have laserlite panels intalled above my balcony. Timber frame already there. Rough size is 4m x 3m. Inspection for measurements needed and included in the budget. Level 1 unit. Manly Vale

Flat roof repairs (just above 1 room)- Inspect, quote & repair ASAP. - Due date: Before Tuesday, 31 January 2023

Remove sagging section of ceiling and leaving approx 200mm from the cornices. Check existing timber patterns and ad new support and Re sheet section of ceiling with 10mm plasterboard. Set and sand all joints ready to paint. Apply one coat of sealer to the new plaster work. Apply two coats of paint to the entire ceiling and cornices only. Protect floors and furniture with drop sheets. Clean up work area and dispose of all rubbish. About 5m x 2.5m - Due date: Flexible

Looking for a quote to repaint / spray paint the roof panel of a 2007 Toyota Yaris (3 door hatch). Colour code 209. Happy to come to a garage / site around Sydney's Northern Beaches (e.g. Brookvale). Please only want people with auto body repair experience. - Due date: Flexible

Hi there. Looking for someone to clean the gutters on my house please. Can be flexible on days. I have a ladder but it’s old so suggest you’d bring one yourself. Photos show access and floor plan. Gutters are just down the two long side of the house.

Replace 1 leaking roof tile on pitched roof and clean roof gutters approximately 13 x 8m. As soon as possible - Due date: ASAP