Find trusted insulation contractors near you

Hi, I need an experienced and licensed air conditioning technician to visit my property in Mackay to inspect and fix an aircon leak to prevent water leaking into the ceiling. Scope of work: 1. Locate and fix the leak (inspect internal drain tray/line and roof/wall pipework). 2. Re-insulate the FULL length of the roof ceiling pipework with proper insulation and UV-resistant tape/duct cover to completely prevent ceiling condensation and leaks. 3. Test and confirm the air conditioner is working properly and cooling effectively. 4. If the leak is caused by a blocked drain or dirty internal unit that requires a clean, please advise on-site and give me a call. Requirements: - Experienced/qualified aircon technician - Supply all required materials (insulation foam, UV tape, basic fixings). - Provide completion photos and video to make sure all work are done This aircon is a stand alone aircon. Give me your quote

Ceiling area is approx 140m2. Tiled roof, around 40 degree pitch. We have the insulation material already, just needs to be installed to cover over existing batts.straight forward "L" floor plan. Standard hard wood pitched and braced roof frame. No a/c ducts. No down lights. Minimal electricals. Existing batts are very old. The insulation material is designed to loose lay over existing material. You'll need your own tools required. Ladder can be arranged. tiled roof. Manhole access to roof cavity.

Hi! Reinstatement of 1.5 m² of internal façade wall lining following completed mould remediation. Supply and install insulation matching existing specification, reinstate plasterboard, tape and finish ready for painting, and reinstall approx 2.5 m of skirting (we have already bought the skirting for under the window). No demolition or structural work required. This is an apartment in a larger building. On site parking available, lift available. Separate air-tasker jobs not included (but check-out our other post about this) : 1- Carpet re-instatement (we saved the carpet that was new that now needs re-laying) 2- repaint (primer and paint supplied)

Roof whirlybird was blown away by the insane storm yesterday in Sydney, which opened up a hole on my roof and get free flow rain water straight to the pink batts on the attic. Hole has been covered and insulations has soaked up all the water that need to be removed and replaced. (potentially dry up?) Not the entire roof space but just a 1mx2m size area. Not sure with the price quote but just throwing a figure here.

R5 insulation suuplied and installed for ceiling total 20.1 sq mtrs.

We need our shed insulated. Roof, one side wall. Front and back, very small area. Side wall is about 9m x 2.1m, roof is about 9m x 2.5m.

Install of underfloor insulation, 105 square meters worth. We will supply the insulation.

Install insulation in garage ceiling on Monday 26th October, before 2pm. I have 4 bags of insulation. Price is for install only. The area is approx 6x6m

I’m looking for an experienced carpenter / plasterer or ceiling renovation contractor to install a new insulated plasterboard ceiling in my existing single garage in Malvern East. Garage details: * Approx. 3.5m × 6.1m (21m²) * Existing corrugated metal roof with exposed timber beams * No existing plasterboard ceiling * Roof has been inspected and repaired, with no active leaks identified * Electrical rough-in has already been completed for 6 LED downlights Scope of work: 1. Inspect the existing timber beams, particularly one partially deteriorated section near the rear window. Advise whether additional timber reinforcement is required and provide a separate price if necessary. 2. Supply and install suitable ceiling framing/battens as required. 3. Supply and install ceiling insulation, including an appropriate condensation-management solution for the existing metal roof. 4. Supply and install plasterboard ceiling across approximately 21m². 5. Complete all plasterboard jointing, stopping and sanding, ready for painting. 6. Construct a suitable bulkhead/boxing around the front roller door area and close fixed gaps where appropriate, while maintaining full roller door operation and service access. 7. Allow for the 6 pre-wired LED downlight positions. Optional extra: * Weather sealing around the roller door, including top and side brush seals, if experienced with garage doors. Important: * The electrician will return to complete the LED downlight installation. * Please include labour and materials in your quote. * Please specify whether timber reinforcement, insulation, bulkhead and sealing are included or priced separately. * Photos of the existing garage are available. Looking for someone experienced who can manage the complete ceiling installation from framing through to a paint-ready finish.

Supply and install ceiling insulation top up to total R4. Currently there is a thin layer approximately R1 of cellulose loose fill over the house. Home is in a single-storey free-standing townhouse, three bedrooms (200 m sq).

We are looking for removal of old insulation (small bag style) vaccumm of roof space and installation of new batts (we have batts supplied). Job in Safety Bay (Rockingham) approx 110m2. Are you interested in this kind of job? What are your rates and availability. Thanks, Nancy.

Need someone that is qualified to put insulation into the celing of our home. Size is 3 bedroom 1 bathroom. The other room had no ceiling to put it into.

Remove (only) roof insulation from a small 3 bedroom home in Ivanhoe on Saturday morning. Ceiling has been removed in kitchen so easy to use to drop insulation on the kitchen floor and then place outside for rubbish collection. Only partially insulated with some patches of no insulation in ceiling.

Here's a ready-to-post Airtasker listing: Title: Remove & dispose of ceiling insulation + gyprock debris — 6x6m room Budget: $300 Location: [Your suburb] To be done: This weekend (Sat/Sun) Description: The ceiling in a 6x6m (approx 36m²) room has been pulled down and I need all the debris removed and taken away. This includes loose ceiling insulation (currently spread across the whole floor) and gyprock/plasterboard sheeting. What's involved: Bag up and clear all loose insulation from the floor (it's piled fairly thick throughout the room) Remove and stack all gyprock/plasterboard debris Load everything and take it away for disposal Please note: Tasker to arrange own truck/trailer and cover all tip/disposal fees — please include these in your quote. Ground-floor access, room is easy to walk into. Framing, wiring and brick walls stay — it's just the debris on the floor to clear (see photo). The room will need a general sweep-out once the bulk is gone. Please bring your own tools, bags, PPE (dust masks/gloves recommended — old insulation can be dusty) and anything needed to load out safely. Let me know your availability for this weekend when you quote.

Installation of five bags of ceiling insulation. The ceiling insulation bats are already in the roof (ready for installation) but need to be professionally installed by somebody that knows what they’re doing. Access is limited but there is ceiling insulation currently in the hardest to reach locations. I would estimate there’s probably a few hours work involved for someone that knows what they’re doing.

I need a fit and motivated Tasker to crawl under my house on stumps and shift some dirt to the side.The spray foam insulation guy has completed 70% of the subfloor, but needs a narrow crawl space cleared in the last 30% tight corner so he can fit through to finish the job.$50 an hour

Install R2.5 polyester insulation under the floor of a 2 bedroom weatherboard house (approx 85sqm) (will provide insulation, staple gun, coveralls, dust mask and sheet to lie on if you need)

I’ve already installed over half the subfloor insulation in my home (134m2) and need someone to complete the job (approx 65m2). The product is a recycled polyester batt (soft, no itch, no PPE needed) that simply tucks up between the joists and staples into the timber, very straightforward once you’ve done a few. The work involves: • Cutting rolls to length (width is pre-sized, length cuts only) • Tucking batts snugly up under the floorboards • Stapling into timber joists to secure Important: There is fragile ducted heating pipework under the house. You’ll need to work carefully around this and not rush. This is the main requirement, someone methodical who won’t damage the ducting. It’s not difficult but it is a little tedious and dirty under there. All equipment is provided: • Knee pads • 2 x staple guns • Head torch • Scissors/blade for • Protective eyewear and mask (for dust) •I used a bike helmet to protect my head which you are welcome to use but if you have a hard hat that would be better. You’re welcome to bring your own gear if you prefer. The insulation rolls are on-site and ready to go. I’ll show you what’s been done already so you can match the approach. Product reference and install method: https://youtu.be/-rIyo6bh9A4?si=hNoCcayYgbWn_9LT Please only apply if you’re comfortable working in a crawl space and can commit to careful, unhurried work. Happy to answer any questions.

Install attic insulation. I'll supply the batts