Find an experienced plumber in Castle Hill NSW

The toiltet is leaking , Attached some photos

1- Fix leakage of a laundry tab. 2- Fix leakage of a toilet. Leaks from the tank to the toilet.

I need someone to help replacing the old water tap to a new one. Have to be after 4:30pm on a weekday.

The first photo shows the shower faucet in the bathroom. This faucet needs to have the hot and cold water control replaced. In addition, there is a water hammer issue with this faucet. Every time it is used, there is water hammer noise/interference. The second photo shows the bathroom sink faucet. The current faucet keeps running, and the internal components have aged, so it would be better to replace the entire unit. The third photo shows the kitchen faucet. The current faucet slowly leaks from the top, and the internal components have aged, so it would be better to replace the entire unit as well.

I need a plumber to replace the leaking garden taps . I already bought the garden taps, so labour only.

Shower is leaking. Need a fix i.e. replacing both taps' cartridges or if possible the seals. The taps are pretty awkward type. Also I want to replace the shower column and head.

Need fridge connected for water and ice. Brand new laundry needing washer and dryer connected to exist outlets

Scope of works 1. Add tap to existing cold water pipe next to hot water unit externally 2. Install only cistern inlet valve to toilet - cistern. Inlet valve I will provide 3. Install s-trap and stop cocks to 2 sinks and also 2 x mixer taps- 1 for kitchen and 1 for vanity, you will need to get s-trap we already have the stop cocks. You will need 1 stop cock so the washing machine and mixer can connect to it we have the others, also need to extend the pipe as it is flush with the bottom shelf of the kitchen. 4. Install washing machine

Please QUOTE for labour only for the following. The tradie carrying out the work must be licensed by NSW Fair Trading. 1) Install NEW shower pan 1200mm x 900mm (waste drain at centre) on top of existing tiled shower floor 1200mm x 900mm (existing waste drain just off-centre) 2) The new shower pan is to achieve the necessary slope to drain the waste to the floor drain. 3) Reposition the existing floor waste pipe so that waste from the new shower pan flows directly into it. 4) Remove existing step at shower entry, and build step 40mm high 5) Remove and dispose of all waste generated I will supply the new shower pan 1200 x 900mm with a centre waste outlet NOTE: The existing waste drain of the existing tiled shower floor is slightly off-centre. There is already a new waterproof membrane underneath the existing tiled shower floor. Customer review of your work to be included.

Garden tap is leaking and dripping

Take the hot-water system off the off-peak circuit and put it on the normal house power. Then we add a timer so it only runs in the middle of the day. When it runs, it automatically uses solar first, then battery, then grid. That way almost all of our hot water comes from the sun.

My kitchen sink (Unit in an apartment complex) is blocked and water is draining quite slowly. Checked the S bend beneath the sink and blockage isn’t there: seems to be beyond that point. Need a plumber to help clear the blockage.

It looks pretty straight forward but we broke our old seat and need to fix a new one.

Hi, I’d like to renew some of my bathroom and shower equipments and looking for a certified plumber with insurance to assist. The work consist of: - remove the old toilet, and install the new one - replace two showers and their taps - replace two taps I’ll purchase the taps, showers and toilet. You’ll need to have all the other necessary tools and materials. Old toilet and showers must be disposed by you. I’ve included photo of the old parts, and new ones which you could find on bathroom directs. Please let me know your proposed price.

There is a leak on my toilet cistern that happens only when I flush the toilet.

Hi, I have 3 jobs I need to get done: Job #1 - I need to replace my current kitchen mixer tap with the new one I have purchased. I have a 32cm clearance from the undersink to the shelf which may not be enough for the gravity ball thing. Therefore I MIGHT need you to cut a hole in the shelf to open up the vertical space. Please include cost to cut a hole as well if required on the day. Job #2 - I think the pressure of my outside tap is too strong as my Holman timer keeps leaking or coming off. I need a solution. I was thinking some sort of mechanism to reduce the pressure. Job #3 (optional) - I also don't like how the outside tap is somewhat facing downwards as my timer is a bit bulky and doesnt get enough space to fit on. I have a swivel thing attached which I guess dows the trick but ideally I don't want attachments if theres a better option out there. Interested in solutions here too Let me know if you need any further information

About 40 cm is broken, however, might need to replace longer part.

Need to install a shower head to replace a broken one

We need a plumber to connect kitchen & laundry sinks to the drainage pipe under. There is no need for the tabs or sinks to be connected. All materials are reimbursed or provided.

Plumber fix 2 leaking taps and slow filling toilet cistern. The flexi pipe yo the cistern seems to be twisted making the toilet fill extremely slowly. The bathroom and laundry taps are leaking - tap head falling off easily.