Find an experienced letterbox replacement expert in NSW

Install a letterbox on a slatted fence. Letterbox has four holes on the rear. Fence will need holes drilled to accommodate screws (provided). When attached, it will look like this (see photo - that’s the neighbours but our fence and letterbox look the same)

Supply n install clothesline. Letterbox, site levelling

I need an experienced handyman or landscaper to remove my old letterbox and replace it with a new post-mounted setup dug into the ground. What needs to be done: Removal: Dig out and remove the existing old letterbox post and its concrete footing from the soil, disposing of it properly. Digging & Prep: Dig a new post hole in the soil (approx. 30cm deep x 10 c.m wide). Assembly & Installation: Assemble the new Sandleford letterbox head onto the Sandleford mounting post using the provided nuts and bolts. Concreting: Set the post securely into the soil using quick-set concrete, ensuring it is level, plumb, and aligned perfectly. Product Details: Letterbox & Post: Sandleford Ripple/Epic mailbox body with a Sandleford Economy metal mounting post (bolt-on top plate). Fixing Surface: Outdoor garden bed / soil What I will provide: The brand-new Sandleford letterbox, post, and assembly hardware. What you need to bring: Shovel / post-hole digger / crowbar (to get the old concrete footing out of the soil). Quick-set concrete bags Please let me know your availability and if you have any questions. Thanks!

Product link: https://www.milkcan.com.au/products/parcel-pal-2-pillar-letterbox-black-charcoal?variant=52825928532280&gad_source=1&gad_campaignid=23384208616&gbraid=0AAAAAC2jNO6nMner0vVOxCwi5AmM7wceP&gclid=CjwKCAjwn67VBhBnEiwAXUIN1ScYS46M9MpTALEMaIGUq65tcj8PeJG-u7Jv5I8y_1C2RiJR3xI-gBoCurgQAvD_BwE Picture of the place where it needs to be installed.

rendering a letter in st cair

Sandleford 75cm White Matte York Parcel Letterbox Installation, need leveled cement base. Link to product below: https://www.bunnings.com.au/sandleford-75cm-white-matte-york-parcel-letterbox_p0520539

Hang pictures, install letter box on a post, replace some rotted timber decking (about 5 panels). Replace timber at back of house above pergola

Install a post mounted letterbox Letterbox, house numbering and post supplied. Will need cement to secure post. Will need bolts(fasteners) to secure letterbox to post. Will need to apply house number to letter box

Hi We have a letterbox pillar which is in one side of the entrance and needs moving to other side. Letterbox is bricked with rendered and painted. Move from left to right

My front open brick insert letterbox was hit by a reversing car and has detached from cavity. The stainless steel opening front needs to be fixed (internal flap hinge has broken) and reattached to stone mount cavity. If you had a small dollop of standard mortar to fix the small pieces of the stone base that have cracked that would be perfect

I need this letterbox installed into my picket fence. See photos of fence and intended location, installation instructions and example of how it should look. https://www.milkcan.com.au/products/palazzo-fence-letterbox?variant=49700163191096

I need a masonry letterbox built on a concrete pad in Macnamara, ACT and compliant with Ginninderry requirements i.e. built with PGH Whirlwind brick (same as facing)

Attach a retractable garden hose to brick letterbox pillar

Remove old letterbox properly. Lay concrete, attached new letterbox

Replace my existing letterbox with a new one. The new letterbox is to be made from timber sleepers (only 2) as shown in picture. The space for the letterbox is roughly 1200w by 1000h. Better that you supply the material so you know how to work with it. Letterbox should have the standard mail sleeve and a cylinder for junk mail. Ideally paint finish can be Murbau

Install either a free standing letter box including the concrete slab required for installation, or free standing post letter box installation including cement fixation

Buy and install a letterbox

Need to have the letterbox removed (level with bricks next to it) so a new front fence can be installed. Thanks

I need a letterbox (wall mounted) - attached to a rough sandstone wall - so that it is flat/level, ie. accounding for the uneven surface. Also the stick-on numbers applied to box. Ideally it will be placed where the current house number is - which may require removing the house number.

Based In Waverley (NSW) the app doesn’t let me update the address so I wanted to clarify. Small metal letterbox to mount onto my wooden fence. All screws and assembly materials included in the box, but bring your own tools.