Find an experienced handyman in North West Melbourne

I fixed a small hole in my bathtub with epoxy, but it doesn’t look smooth or original. Now I need someone to finish it properly.

Hi, I need a someone to install a new Sandleford Magnum Black Post Letterbox in Greenvale (3059). I have already bought the letterbox and assembled it. Post Installation: Dig a hole (approx. 30cm deep) and set the letterbox post. Please use concrete (approx. 10cm) to ensure it is perfectly stable and level (include it in your quote). Numerical Attachment: Screw on 2x Sandleford 60mm Stainless Steel Numerals to the front face. Finishing: Level the surrounding soil so it's ready for mulching. Please bring your own tools (post-hole digger/shovel, spirit level, and drill).

Have to drill the wall to fix the following items: 1. A clock 2. Wall Ledges 3. A wooden name board

Set up gym smith machine

We are looking for a skilled maintenance person or carpenter to replace three (3) handrail brackets at a professionally managed property in Glenroy. Location: Glenroy, VIC 3046. Requirements: Must have your own tools and hardware (brackets, heavy-duty wall anchors, etc.). Prior experience in property maintenance or carpentry. Ability to provide a fixed quote after seeing photos or a quick site visit. Must provide a receipt/invoice for owner records.

Fix paint chips from taking picture off wall

Hi there, I am looking for someone to come and install: - 6x Wired Cameras (wiring have already been done, but the ends need to be clipped to RJ45) - 1x Aqara Door Handle (to the main door) - 1x Smart Door Handle (to the master bedroom door)

We need a small sized doggy door installed through brick/veneer. Need to see a few options on the product, happy to supply it myself or you to source. Want a professional finish and quality product only.

The door is jammed because wood has expanded. May need sanding and/or realignment.

Please provide a quote in your message. The renter has reported that the garage roller door is currently malfunctioning. The door needs to be manually pulled down, and when attempting to operate it via the remote control, the unit emits a continuous beeping sound without completing the closing function. This issue appears similar to one that was raised approximately five years ago, which your team previously attended to and resolved. Based on the current symptoms, it is likely a recurrence of a similar fault. From my initial review of the video provided, I believe the following may be contributing to the malfunction: Signal / Receiver Issue (most likely) The motor appears to have power; however, it may not be receiving the signal from the remote. Possible causes include: Disconnected or damaged antenna wire Fault with the receiver module (control box not communicating correctly) Interference from any added devices (e.g. WiFi/smart automation setup)

Rails on drawer broken. Doesnt slide properly and drawer itself doesnt line up properly either anymore. Lots of little beads fell out. I have collected them all.

My mixer on my tap snapped off and has come loose. I would need a tap replacement by a plumber. Please contact me for more info

Need handyman for installation for wooden bead (corner) x 10m Frame corner on sink slab x2m Blind replacement x 1 One small patch work job if you can do it. Wooden floor gaps filling / silicon as required ALL MATERIAL PROVIDED. ONLY LABOUR & TOOLS NEEDED.

Garage door no longer responds to remote controls or wall panel control. Have tried resetting remotes & limits but still no response. Model is Steel line SD-800

Sliding door to bathroom is jammed and needs realignment to allow smooth open and close. Every time I do it it reverts in a few weeks. Keen to find someone with experience in this issue

1 year old security door I want to someone to fix

Roller door jams. Motor seems to work okay. Door just needs a shove to get it to open or close, so needs repair.

I need to get a pet door installed on a wooden laundry door. I will supply the pet door. Refer to the photos. Also there was a pet door before this and the last tenants have patched it. So we need to remove the patch and install the door.

I have two doors. One is already up but doesn’t close properly. I need it adjusting and I need a handle put on the door and drilled as it doesn’t have the hole at the moment. I also need my garage door put up. It’s an entry door fibreglass it needs to be put on the hinges and the door cut out for the hole and a handle.

Two small area for rendering