Find an experienced ceiling fan installation professional in NSW

Need to remove 2 ceiling fans

I need an electrician (will need evidence of this) to take out 2 light fittings and put in 2 ceiling fans

5 ceiling fan installation

Celling fan is not working also the light is not turning on. Need help to fix it.

1 - Install ceiling fan, in place of existing down light (centre of room) Fan is remote. 2 - Install 4 new down lights to existing switch (will supply) 3 - Test and Replace Smart Switch (Fibaro with Shelly) will supply Shelly Switch. Roof access (Skillion)power can be taken from the existing light or a power cable supporting other fans in the roof. Must be certified electrician. Gyprock ceiling / walls, I’ll to provide the wooden battens and cut to size once measured.

To replace existing fan in Hair Salon

New installation of ceiling fan with led light and remote control, no need to use the switch light. The fan needs to be assembled.

Remove the existing ceiling fan and install a new one. I provide the fan with a remote and light. The current fan switch is a regulator, will need to replace that as the new one will be controlled by remote.

• Fans are already supplied and on site (link to product below) • Both bedrooms currently have 6 led downlights but no central light where the fans will go • No manhole in one room but not the other (different roof linde) • Fans are DC fans with remote controls • Located in caringbah south • free standing house- Easy access and parking available in driveway or street directly out the front Must be a licensed electrician Fans purchased- https://www.templeandwebster.com.au/Alina-132cm-DC-Smart-Ceiling-Fan-with-Remote-Control-AART1643.html

Remove light fixture and Install 10 inch rod with 3 blade 44 inch dc fan with integrated light and wifi module on a concrete ceiling. HAIKU L fan supplied. Onsite parking.

Need to replace 2 existing ceiling fans

In need of a ceiling fan to be installed. I have the fan.

Ceiling fan is not working need to fix it

Hi, I need a DC ceiling fan (Eglo, Seacliff 52") installed in my unit in Dulwich hill. It's and older unit, so it's a concrete ceiling. There is an existing light fitting and a switch on the wall 2 metres away from the light fitting.

I require a licensed electrician (with current NSW registration if applicable) to carry out the following work: Connect four ceiling fans (each with integrated lighting) to the existing lighting circuits/final subcircuits. The fans are already assembled and securely mounted to the ceiling joists using appropriate fan-rated brackets/supports. The previous light fittings have been removed, leaving the existing ceiling roses or junction boxes ready for connection. Each fan includes a light kit, and the supplied remote control receiver/handset allows independent operation of the fan motor and the lights (i.e. separate switching/control via remote). Supply and install two double GPOs (general purpose outlets / power points) in the attic/roof space. This will involve running appropriate TPS cable from the nearest existing circuit or distribution point in the roof space (or as determined on site), installing two flush-mounted or surface-mounted double socket outlets in suitable locations, complete with architrave brackets or wall boxes, attaching to a single timber frame/joist as required, and making safe connections back to the existing cabling. The attic has a catwalk/platform with carpet underlay, allowing comfortable and safe access without risk of falling through the ceiling. Please see the attached photos showing the existing ceiling wiring/rose and the fan's wiring diagram/label for reference.

We have set up a new bunk bed in my daughters room so need to move the ceiling fan to another spot.

Install 2x ceiling fans. These are Stradbroke 52" DC Ceiling Fan Black LED Light

I bought a fan and had it installed without the light. I can't seem to clip it in myself

need 3 x ceiling fan installed - I have the ceiling fans purchased, just need them to be fitted. Noting, this is not a replacement so will be a new install / all rooms have ducted and light fixtures (down lights). Apartment - second floor. Apartment building with plasterboard ceiling • Access to switchboard inside the unit • Current down lights will require to run seperate to new fans as the current down lights are on a dimmer switch / require separate wall controllers in 3 rooms. • May need to also Install a fan-rated support bracket

I am looking for a licensed electrician to complete the following work: • Install one ceiling fan (ceiling fan already supplied) • Install one double power point (to be supplied by the electrician) • Install one new wall switch with two switches to operate the ceiling fan - if you need a second switch for isolation, it does have a remote (to be supplied by the electrician) The fan has a light on it and a remote control. There is no roof access I also have additional electrical jobs that I would like to have completed separately, which we can discuss once the job is underway. Please quote for labour and supply of the power point and wall switch. Proof of licence and insurance required.