Find an experienced gas fitter in Melbourne

Hello! I'm looking for a licensed plumber/gas fitter to disconnect a two-burner gas cooktop, sink and tap, then return to reconnect everything once I've installed a new kitchen benchtop. I am located in quite a large apartment building in the Melbourne CBD

Task Summary: I need a licensed gas fitter / gas plumber to replace the thermocouple on the front-left wok burner of my 90cm Smeg freestanding cooker (Model: BA9066XS) in Brunswick East. The Issue: The wok burner ignites fine, but the flame turns off immediately as soon as the control knob is released. I have already cleaned the thermocouple tip and checked the knob clearance, so the internal flame failure safety device (thermocouple) likely needs to be replaced. Scope of Work: Supply (or source/fit) and install a compatible replacement thermocouple for a Smeg BA9066XS wok burner. Important Requirements: Must be a licensed Gas Fitter / Gas Plumber (VBA registered/licensed or equivalent state certification).

Need someone to cut and fix a beer pipe. Job: Beer line is leaking / damaged. Need to cut out the bad section and fix/rejoin with proper fitting

Hi, I’m looking for a qualified technician to inspect and repair two issues with my gas cooktop and kitchen rangehood. 1. Gas Cooktop Ignition Issue * The ignition on the largest gas burner is not working. * The other three smaller burners are working perfectly. * Only the ignition on the largest burner needs to be inspected and repaired. 2. Rangehood Exhaust Fan Issue * Fan speed settings 1, 2, and 3 are not working. * Only the highest fan speed is functioning properly. * The fan controls need to be inspected and repaired. Location: Melbourne, VIC 3000 (Vision). I’m looking for an experienced technician who can diagnose and repair both issues. Please provide a quote, including call-out fees, labour, and any potential replacement parts. Thank you

Trying to upgrade gas pressure at my boarding house in richmond with alinta, and heres what they need: Details of all gas appliances, including the MJH load of each appliance. The plumber's details, including: Plumber's name Plumber's licence number Certificate of Compliance (CoC) number The total gas pressure in kPa. Can a plumber pls come to help?

Need a licensed gas plumber to remove a gas connection to a wall mounted Rinnai heater unit, and the gas line to the heater capped. Ideally you can also dispose of the unit.

I have a bbq connected to the house gas and I need to replace the existing with a new valve so I can turn it on/off.

I'm looking for a licensed pro to complete the legally required Victorian rental compliance checks for a small unit in Melbourne. The Job: • Gas Safety Check: 2-yearly check including CO spillage & negative pressure testing. Only 1 (gas cooker/oven combo). • Electrical Safety Check: 2-yearly check to AS/NZS 3019 standards. • Smoke Alarm Check: Annual test, battery change, and decibel check. • Documentation: Official digital compliance reports + Certificate of Electrical Safety (CoES) required upon completion. Future Work: I own a second unit in the area with checks due in July 2027. Do a great job on this first one at a fair price, and the second property is yours. Requirements (Please don't bid unless you have these): • Active A-Grade Electrician / REC license. • Licensed Plumber/Gasfitter with the Type A Gas Appliance Servicing Endorsement (required by CAV). • Public Liability Insurance. • Willing to provide VBA / ESV license details before starting. Please drop your all-inclusive price and next availability below. Thanks!

NEED A PLUMBER TO DO GAS SAFETY CHECK AS PER ENERGY SAFE VIC CHECKLIST FOR A 3 bedroom House ; Gas stove Gas water heater

I am in the process of starting a Minimum Stands Inspection Business A licensed electrician and gas plumber trades are required. Looking for potential work availability and interest. Not all areas have been finalised but need to start building a team.

Trying to upgrade gas pressure at my boarding house in richmond with alinta, and heres what they need: Details of all gas appliances, including the MJH load of each appliance. The plumber's details, including: Plumber's name Plumber's licence number Certificate of Compliance (CoC) number The total gas pressure in kPa. Can a plumber pls come to help?

Gas cooktop not igniting as per photo , 1 not working can hear lighting sound, need to hold it for using. Need a repair

I am abolishing the gas connection at my property and need to disconnect the existing freestanding gas oven and stove cook top prior. The gas abolishment is booked for Thurs 27/8, would be ideal to do it tonight Tues 25/6 or Wed 26/6

We require a licensed and insured gas fitter to attend a residential property in St Kilda to safely disconnect an existing 54cm freestanding natural-gas oven and stove. Scope of work: Disconnect the existing appliance from the gas supply Safely isolate and cap the gas connection Test the connection to confirm there are no gas leaks Leave the existing appliance ready for removal by the new appliance delivery team Provide an invoice and evidence of the appropriate gas-fitting licence Provide any required compliance documentation following completion The appliance does not need to be removed or disposed of, as this will be handled separately by the delivery team. Please include all labour, materials and Airtasker fees in your offer. Kindly also confirm your availability and whether you can return on a separate date to connect and commission the replacement gas appliance. We will need you to re-attend the site to connect the new appliance - Westinghouse 54cm Freestanding Gas Cooker + Grill - White Model: WLG510WCH Ipn: 835081 Quote for both in the comment!!

Need kitchen sink, gas cooktop and tap disconnected for kitchen demolition and complete removal. Need them all completely removed to within wall cavity. Please note that gas has been fully disconnected from the property, so there is actually no gas running to the cooktop. It just needs to be removed to any point within the wall.

Require a gassfitter or plumber with gasfitting endorsement to safely disconnect oven gas line etc in order for kitchen to be removed and line made available for next kitchen install.

Oven not staying on when on low setting

Hi there, Calling all gas Braemar central heating specialists - following attached errors have come up . Could be simple or more involved - also gas fireplace has stopped working too. Guessing just pilot light needs relighting But actual gad supply has been confirmed - gas to house cooking and hot water is AOK FYI PAYMENT $200 including call out fee and 1 hour labour included in this listing +separately $120/hour on top thereafter

We are moving out and need our gas stove disconnected.

cap gas as gas stove top to be replaced by induction