Find an experienced flooring expert in VIC

Need to lay new vinyl in kitchen. Masonite is good underneath old Lino. Appx 4m x3 m $200

I need someone to install the floor boards in my house 200 square meters i will supply the floorboards. Thanks

Install one room of hybrid floors on clean concrete slab ready to go approx 30 square metre’s

Remove carpet and install wooden floors

Vinyl plank and sheet installer needed to assist with upcoming jobs which include floor preparation and installing vinyl. Need someone with experience and day rate will depend on experience. Please advise what you are able to do. Thank you

Need a 3x2 deck installed

Need a treated pine deck subframe installed. The area size is 6 x 7 meters, across the concrete area shown on the image - refer to the 3 x 3 blocks. We will source composite decking and would require that installed as an option as well. Provide the cost to source and install separately.

16 stairs and 155 m^2 flooring. please only quote for installation hybrid flooring including the stairs.

Need to remove and install hybrid floor board, at least 9mm 25 sqm apartment unit, 5th floor

Hi - Looking for a person to install laminate hybrid flooring for the missing patches with scotia. Will provide scotia & flooring. See photos for details. Thanks

Install 3.3 x 3.6 small room with laminate flooring. All laminate flooring and underlay at site, just needs installation with relevant materials. Shouldn’t take too long to complete small job

Install hybrid flooring.

Hey, I need carpet removed and floorboard installed in two bedrooms. Each room is 2.7m x 3x total 16.2m2. There is concrete underneath the carpet. Remove carpet and underlay Remove tack and smooth edge and staples Dispose of carpet and underlay Install floorboards Cut around doorways Installations where needed Leave rooms clean and tidy I will supply the floorboards. Let me know if quote includes disposal, trims, underlay and moisture barrier if required and any flooring prep. Looking for someone with experience and the right tools.

I need someone to install hybrid flooring in a bedroom; see circled room in the attached floor map.. roughly 4x4 Old carpet has been ripped off and floor is concrete.. just need sanding to remove old carpet glue. I'll provide the hybrid flooring materials

Hybrid flooring installation in 4 bedrooms and WIR. See attched image for the room sizes. I haven’t bought flooring yet. I can buy from your preferred supplier. Rest of the house is tiles and rooms are carpet. I have taken carpet out from one room already and is fully ready to install the flooring. Remove the carpet from other rooms and take it with you

Remove carpet and install hybrid floor

Remove some existing boards to match up the lengths, remove some quad along the window wall to fit in boards and match up, install floor boards into and through small room 3m x 1.5m. Underlay and boards provided.

Install deck in backyard

I have 25m2 of hybrid parquetry flooring i need installed as well as 10 linear m of skirting.

I have 10mm Hybrid floor already installed by myself. I need approximately 40 linear meters of quads installed. Each quads is 2.4M. I have 24quads. Want all the quads done with 45 degrees angle in corners and wherever necessary. Installed with NAIL GUN not liquid nails.

Looking for wood floor sanding and polishing for a property in Altona. Approx. 50 sqm. indoors

Need concrete floor polished in kitchen/living area. Measurements 6.6 x 5.1m

I want to polish my boards

Looking for an experienced timber floor sanding and polishing professional. The job includes 4 bedrooms, lounge, living room, meals area, kitchen, hallway and entry. There is an old fireplace area where the fireplace was removed that may require blending into the existing floor. Please inspect, advise if any repairs are required, and provide a quote for a natural matte finish. Previous experience and photos of similar work are preferred.

Floors need sanding and polishing some is newly laid some is slightly stained. Tasmanian ok on yellow tongue will need some prepping ?

Need couple of floor to be replaced,fix the floor and sand and polish , I want to know how much I get charge per sqm

We have hardwood floors polished and don’t want to redo we just want to make them look super tidy and clean/shinny.

**Looking for two quotes** 1. We have one carpeted room with floorboards underneath. Area 16m2. Please provide quotes for sanding and polishing floorboards both with and without carpet removal. 2. The rest of the house has no carpet, please provide another quote for sanding and polishing the whole house which is about 80m2.

cleaning and polishing 200sq metres of timber flooring

I have new tenants moving in on Saturday. All areas of the house have original floorboards except the kitchen area. It's vinyl on top of Masonite board nailed down to existing floorboards. I need the vinyl removed to expose original floorboards. Sanded and polished. Other renovations underway will be completed today.

Sanding and polishing a parquet floor 3 bedroom house

I’m looking for a professional floor sander to try and sand back and polish 2 section of damaged flooring for a property that’s going to be sold. I understand it won’t be 100% just need it looking better I’m hired to fix up the house for sale, this is a job of mine and not my house. This job is located in Coburg

I’m REQUEST FOR QUOTE – FLOOR SANDING & POLISHING Hi, I’m currently seeking a quote for sanding and polishing approximately 108m² of hardwood floorboards. At this stage, I’m after an approximate quote only, as I do not yet have access to the property to arrange a site inspection. I’m happy to answer any questions promptly if needed. Scope of Works: * 3 x Bedrooms * 1 x Hallway * 1 x Lounge room * 1 x Dining room (In the picture I’ve provided you can see the areas marked in green on the floor plan.) Job Details: * Property is vacant * Carpets have already been removed * All staples, tacks, and trims have been cleared * Floors are in great condition * Areas are fully accessible and ready for work Finish Requirements: * High-quality water-based satin finish * Durable, long-lasting product (no low-grade materials) * Clean, professional result with attention to detail * Must be completed using modern equipment and experienced tradespeople.

- Chevron timber flooring - Good condition, just dull in areas - No sanding required, clean + polish only - Empty house, easy access - Need done before move-in Looking for someone experienced with timber floors.

Sand and oil garden deck. There is a heavy table on deck that would need to be taken off

Task: Floorboard Prep Sanding & Polishing Brief description: Lightly sand, prepare (take out any random staples/leftover nails from carpet removal if any, fill any cracks or holes), and polish floorboards of 3/4 of a house (see floor plan red circle area). Please apply x3 coats of polyurethane as per usual standard. Details: • Location: Doncaster • Access: Easy driveway access, single story, no furniture or obstacles • Tools/materials: You’ll need your own tools and products for prepping, sanding, polishing. Scope: • 3/4 of house (see picture floorplan) • Vacuum/clear up sanding dust before polishing Timing: Around 12 - 21 June. Please quote your total price and confirm availability around 12 - 21 June. Experience with similar timber floor jobs required.

Light buff of floors and polish in a 3 bedroom townhouse. Boards are floating floorboards and in good condition, they have faded in some areas from sunlight and we want to touch them up prior to sale. Location: Seaholme, VIC Objective: Restore flooring to near-new presentation suitable for sale campaign Buff & Recoat with water based matte polyurethane (good quality) Meals area is 3.3x4.1m, living area is 4.8x5

sand and polish an existing timber floor in a two bedroom unit

Looking for someone to sand and polish timber floorboards in my unit. • Timber appears to be cypress pine Please mention how much the quote is going to cost • Floors are in decent condition, just need sanding and resealing

Sand and polish around 40 Sqm fooor

The deck is in good condition. It has begun to show traffic patterns and the finish is showing wear and tear. Prep and finish application is the job to be done. No woodwork or repair is otherwise required

Need someone to sand and refinish the floor.

I need my floor boards sanded down and refinished with similar stain. Part of my floor has some water damage - see photo.

Looking for an experienced floor sander to sand and refinish approx 70 m² of timber flooring (living + dining) in a two‑bed apartment in Melbourne. Goal: bring floors up to rental standard (durable, even finish, safe for tenants). Scope: - Sand the whole area (approx. 70 m²), including edges - Repair minor issues (nail pops, small gaps, replace/secure loose boards if needed) — please note major replacements will be quoted separately - Fill and prepare joints/holes, tidy jump/transition strips - Apply stain if requested (note any colour options) and 2 x coats of high‑traffic, water‑based polyurethane (or advise best durable finish for rental) - Clean up and remove dust; minimise dust (dust‑extraction preferred) - Leave site ready for tenants (no strong lingering odours) Location & access: Altona North, ground-floor apartment Timing: - Preferred start date: 5th July 2026 - Please include estimated days on site and drying times

The deck that came with our house was poorly finished. It needs the old finish stripped and a new finnish applied.

3 bedrooms house in wantirna, hardwood floor needs sanding and coating. Not sure how much it cost, quote on site? or square meter price?

We are putting our house up for sale and need some help replacing with some damaged floorboards. And also stopping other floorboards squeaking in the hallway. There are some other odd jobs I'd love some help with. We can discuss if we meet up.

Want a slightly darker/less orange colour that will not show as much dirt and not scratch so easily. The treatment on the floor currently is not enough for the foot traffic we get in the store. Scratching in one room but minimal scratching in the other. Both about 6x4 rooms

We have Baltic pine floorboards that need refinishing (sanding and polish) They are currently overlaid with vinyl flooring which will be removed before works commence 2 rooms at roughly 30sqm total

Refinishing of timber floors (downstairs) in a Reservoir townhouse. Approx 40m2. Refer floorplan I've highlighted in blue the extent. There are some gaps between boards that need to be filled in a few areas. Sand and refinish floors to new condition. Use hardy sealer / polyurethane coat. House has been recently painted and new carpets etc so dust suppression must be used.

Looking for an experienced tradie to fully sand back and properly refinish internal timber stairs. Anytime between 20th and 25th Jan Details: Approx 14 timber treads (including winders) Existing finish is worn on nosings with a few scuffed areas 2 small gouges to be repaired with timber filler Require full sand back to bare timber (not just a light scuff) Refinish with a high-quality stair-grade clear varnish or polyurethane Minimum 3 coats, suitable for stairs (durable, non-yellowing) Materials to be supplied by you and included in the price Clean, tidy job with proper prep and cleanup Please include in your offer: What product/finish you will use (brand + water/oil based) How many coats Estimated timeframe and drying time between coats Examples of similar stair work if available Home is occupied, but I will be out each day, however walls have just begun painted , so clear communication and care with dust and drying is important. I’ll check quotes later today, will reply then.

I need a small section of timber floorboards (doorway area – see photos) sanded back and refinished to match the surrounding treated floorboards as closely as possible. The area was previously covered by tiles and has old adhesive/paint residue and uneven finish. I’m after a professional result that blends in with the existing floor. Scope of work: • Sand back the existing timber boards to bare timber • Remove all residue/old finish • Prepare surface properly (fill if required) • Stain/colour match to existing floorboards • Apply suitable clear protective coat (polyurethane or similar) • Clean up after job • Supply and apply all required materials Details: • Area size: approximately 1100mm x 1100mm • Location: indoor hallway / door threshold • Access is easy • Photos attached Requirements: • Experience with timber floor sanding & finishing • Own tools and materials preferred • Ability to colour match existing floor as close as possible

Hi there! I'm looking for someone to restore the back deck of my house in Heathmont, Melbourne (approx. 22m2, including steps and balustrades). The job includes: Sanding the deck back to bare timber (currently weathered/old finish) Smoothing edges, steps, and tight spots Cleaning & preparing the surface for finish Applying deck oil or stain (supplied or agreed upon) Requirements: Own equipment (random orbital sander, vacuum attachment, brushes/rollers) Experience with timber decking restoration Ability to complete efficiently and neatly Reliable, punctual, and professional Timing: Flexible - hoping before Christmas but understand if that’s not possible. Payment: Open to quotes. Please provide your estimate

I am seeking an experienced and professional flooring specialist to complete a high-quality refinishing of my indoor solid hardwood flooring and spiral staircase. This project requires proper equipment, attention to detail, and the ability to deliver a smooth, uniform, premium finish. Scope of Work 1. Timber Floor Refinishing (Approx. 40 m²) Sanding & Surface Preparation Fully sand timber floors back to bare wood using professional-grade sanding machinery Precision edge sanding and detailed finishing at corners, skirting boards, and transitions Surface preparation including: • Filling minor gaps where required • Smoothing sanding marks and imperfections • Levelling surface to ensure an even base prior to coating 2. Application of Premium Clear Coatings Apply 2–3 coats of high-quality, non-toxic, water-based clear varnish Light sanding between coats (if required) to achieve a smooth, uniform finish Materials can be supplied by me, or you may provide a quote inclusive of all materials and labour 3. Final Protective Seal Apply a final non-toxic protective sealer for enhanced durability and scratch resistance Ensure a consistent, even, high-quality finish across the entire floor area Maintain and highlight the natural timber grain and tone 4. Spiral Staircase Refinishing (14 Timber Steps) Careful machine or hand sanding of each step, including treads and risers Precision detail finishing on edges, corners, and curved spiral sections Application of matching varnish/stain and final protective sealer Consistent finish to match the main flooring area Extra attention to drip prevention, smooth transitions, and edge accuracy Additional Requirements: Use of dust-minimizing sanding equipment preferred Clean and tidy workspace during and after completion Professional workmanship with consistent coating results Clear communication throughout the process Option for on-site inspection before finalizing the price

Existing timber floor requires sanding back and refinishing with water based coating system. Approx 147m2 in total Quotes welcome

Floorboards need refinishing - looking for quotes

Seeking someone to buff/polish roughly 40 square metres of floorboards. (Wormy chestnut) Per the floor plan only the hallway and living area. Bedrooms and bathrooms are carpet or tile. Floors were fully sanded back 3 years ago with water based clear coat applied. Floors are in good condition with light scratch marks. I am not seeking perfection. Some marks may remain. But I won’t have a full re-sand done so soon as one was only done 3 years ago. I am seeking quotes. I will remove and replace my own furniture. Thanks

Open plan Living Kitchen Hallway -- wood flooring - needs sanding back and then varnished again

Sand old polish off and refinish floor boards in one medium sized room, one small room, small corridor and small foyer

We’re moving into a new office space that has 110m2 of existing engineered timber flooring. The current finish is too dark so we would like the floor sanded back to oak and then re-stained in a light lime wash finish. All existing furniture items in the space will be removed prior to works commencing.