Find an experienced flooring expert in VIC

Materials supplied. Rip up old warped vinyl, remove skirting boards, lay new underlay and vinyl boards down. All major materials (boards/underlay etc) purchased by me prior. Toilet will be removed, just need to leave the cutout for the new toilet to be installed Total room dimensions (Inc toilet room) is 2600x1600

200sqm house needing to install timber flooring, on top of tiles and concreate in bed rooms and living room areas

Install timber flooring for 2 rooms small bed rooms

Any type flooring any one need I can install hybrid laminate harringbone And plus decking I’m here to help

Hi friends I'm flooring installar I can work different kind of flooring if you need a labar I can work for you guys thank you so much

Installation of vinyl roll flooring and prepping for hallway, pictured attached. One section is concrete, one section timbre flooring. Vinyl supplied by us, only prepped and installation is needed.

Looking for flooring installer to supply and install hybrid click-lock flooring in a 1-bedroom apartment in Oakleigh. Living/dining room and Bedroom Estimated total area approximately 30–35m². Scope of Works: Remove and dispose of existing carpet Supply hybrid flooring Install flooring throughout living area and bedroom Clean up and remove waste The apartment is on the second level - no lift. Apartment is vacant and ready for installation

Install approx 60m² of commercial loose lay vinyl flooring to pizza shop in Torquay laying over existing tiles.  Works include picking up flooring materials from Dandenong, transporting them to site, preparing the floor, laying and fitting the vinyl flooring, and cleaning up upon completion. Price includes labour, travel, collection of materials, installation and disposal of installation waste.

Hybrid flooring installation in 4 bedrooms and WIR. See attched image for the room sizes. I haven’t bought flooring yet. I can buy from your preferred supplier. Rest of the house is tiles and rooms are carpet. I have taken carpet out from one room already and is fully ready to install the flooring. Remove the carpet from other rooms and take it with you

Remove carpet and install hybrid floor

Remove some existing boards to match up the lengths, remove some quad along the window wall to fit in boards and match up, install floor boards into and through small room 3m x 1.5m. Underlay and boards provided.

Install deck in backyard

I have 25m2 of hybrid parquetry flooring i need installed as well as 10 linear m of skirting.

I have 10mm Hybrid floor already installed by myself. I need approximately 40 linear meters of quads installed. Each quads is 2.4M. I have 24quads. Want all the quads done with 45 degrees angle in corners and wherever necessary. Installed with NAIL GUN not liquid nails.

I need somebody who has previous experience to install hybrid clip in floorboards to the ground of my yoga studio. As you can see in the photo we have the floorboards lay out- there’s more to complete the space.

Good day guys. I recently had a wall removed and I’d like to have an old piece of floorboard installed to cover the hole. Please advise how you you think is fair for a job like this.

Supply and install of laminate flooring. Hope to beat the prices at bunnings for the supply. Need work on removing existing floor tiles. Need quote for both a) with removing existing tiles and b) not removing tiles. See photos attached, need work on the kitchen and living areas only, rooms have timber floors already, total approx 70sqm to cover. Thanks

Install SPC flooring for a shop in Geelong. Area is 46m2 and flooring will be supplied by us. Need to be done on 12th of April See attached pictures of area

I need 130m2 skirting done before 4th of April

I want to install HYBRID flooring in my apartment living room + bedroom area. I have also given the exact dimensions of the area in the attachment. Need someone to do the complete job including the flooring and installation and removal of old carpet and disposal. The apartment is on Level 5 with lift access. Parking I can provide inside the building parking premises. Dont want any hidden costs so need somebody to do the complete job. And especially who has experience in doing such work in strata buildings to follow the norms. Price should also include the cost of floating tiles. As per my estimation the area is 34sqm. Also uploaded a bunnings flooring for reference only.

Some minor scratches in a few different areas. The floorboards timber is 12 years old. I need it professionally. Done to look like new.

Less than 1 sqm floorboards that need sanding/staining and polishing to match the rest of the floor

Ripped up carpet to find floorboards. Looking to have it sanded and polished and maybe tint. Carpet tac strips have left holes to be filled.

Hi there, I have about 45sqm of flooring that needs polishing only. With Bona floor refresher. And cleaned . Thank you

Sand and clear polish to floorboards as per floor plan attached. Total area highlighted in yellow requires sand and polish. Where I have added some blue lines is the area with wear and scratches the rest of the floor is in good condition. Floors are hardwood. House is empty of furniture and ready for the task.

- Chevron timber flooring - Good condition, just dull in areas - No sanding required, clean + polish only - Empty house, easy access - Need done before move-in Looking for someone experienced with timber floors.

Timber Floor Colour Matching & Full Floor Polish – Office (80–100m²) Looking for an experienced timber flooring specialist to repair and refinish our office timber floor. Scope of work: A wall has recently been removed, leaving a visible colour difference in the timber flooring where the wall previously stood. Need the exposed section colour-matched and blended with the existing floor. polish the entire office floor area (approximately 80–100m²) to achieve a consistent finish throughout. Requirements: Experience with timber floor sanding, staining and polishing. Ability to match existing timber floor colour and blend repaired areas seamlessly. Supply all necessary equipment and materials.

Sand and polish old Baltic boards. All nails have been punched in. Total floor area. Total= <75-80m2 Price negotiable within reason.

I need a guy who can sand and polish the timber floor. I have all tools with me. One of my guy is away for few days.

Need to sand and polish existing work out wooden floor boards

Sand and oil garden deck. There is a heavy table on deck that would need to be taken off

Looking for someone to Sand and Polish the floors in a 3 bedroom house in Bass.

Timber Floor Sanding & Polishing (Living Room) Looking for an experienced professional to sand, prime, and finish my living room timber floors with 2K water-based polyurethane. Floors are currently in good condition. Scope: Sand back to raw timber Light surface prep if needed Primer + 2–3 coats of 2K water-based polyurethane Clean, high-quality finish Details: Location: Warranwood Flexible timing About 60-70 sqm

Requiring sanding and polishing of floorboards

Light buff of floors and polish in a 3 bedroom townhouse. Boards are floating floorboards and in good condition, they have faded in some areas from sunlight and we want to touch them up prior to sale. Location: Seaholme, VIC Objective: Restore flooring to near-new presentation suitable for sale campaign Buff & Recoat with water based matte polyurethane (good quality) Meals area is 3.3x4.1m, living area is 4.8x5

sand and polish an existing timber floor in a two bedroom unit

Looking for someone to sand and polish timber floorboards in my unit. • Timber appears to be cypress pine Please mention how much the quote is going to cost • Floors are in decent condition, just need sanding and resealing

Sand and polish around 40 Sqm fooor

Need to sand and polish 5 bedrooms, two living , rumpus , walkways. Need to retain the patterns. Refer to photos

Need a sand and polish of 27 sqm of wood flooring

The deck that came with our house was poorly finished. It needs the old finish stripped and a new finnish applied.

3 bedrooms house in wantirna, hardwood floor needs sanding and coating. Not sure how much it cost, quote on site? or square meter price?

We are putting our house up for sale and need some help replacing with some damaged floorboards. And also stopping other floorboards squeaking in the hallway. There are some other odd jobs I'd love some help with. We can discuss if we meet up.

Want a slightly darker/less orange colour that will not show as much dirt and not scratch so easily. The treatment on the floor currently is not enough for the foot traffic we get in the store. Scratching in one room but minimal scratching in the other. Both about 6x4 rooms

We have Baltic pine floorboards that need refinishing (sanding and polish) They are currently overlaid with vinyl flooring which will be removed before works commence 2 rooms at roughly 30sqm total

Refinishing of timber floors (downstairs) in a Reservoir townhouse. Approx 40m2. Refer floorplan I've highlighted in blue the extent. There are some gaps between boards that need to be filled in a few areas. Sand and refinish floors to new condition. Use hardy sealer / polyurethane coat. House has been recently painted and new carpets etc so dust suppression must be used.

Looking for an experienced tradie to fully sand back and properly refinish internal timber stairs. Anytime between 20th and 25th Jan Details: Approx 14 timber treads (including winders) Existing finish is worn on nosings with a few scuffed areas 2 small gouges to be repaired with timber filler Require full sand back to bare timber (not just a light scuff) Refinish with a high-quality stair-grade clear varnish or polyurethane Minimum 3 coats, suitable for stairs (durable, non-yellowing) Materials to be supplied by you and included in the price Clean, tidy job with proper prep and cleanup Please include in your offer: What product/finish you will use (brand + water/oil based) How many coats Estimated timeframe and drying time between coats Examples of similar stair work if available Home is occupied, but I will be out each day, however walls have just begun painted , so clear communication and care with dust and drying is important. I’ll check quotes later today, will reply then.

I need a small section of timber floorboards (doorway area – see photos) sanded back and refinished to match the surrounding treated floorboards as closely as possible. The area was previously covered by tiles and has old adhesive/paint residue and uneven finish. I’m after a professional result that blends in with the existing floor. Scope of work: • Sand back the existing timber boards to bare timber • Remove all residue/old finish • Prepare surface properly (fill if required) • Stain/colour match to existing floorboards • Apply suitable clear protective coat (polyurethane or similar) • Clean up after job • Supply and apply all required materials Details: • Area size: approximately 1100mm x 1100mm • Location: indoor hallway / door threshold • Access is easy • Photos attached Requirements: • Experience with timber floor sanding & finishing • Own tools and materials preferred • Ability to colour match existing floor as close as possible

Hi there! I'm looking for someone to restore the back deck of my house in Heathmont, Melbourne (approx. 22m2, including steps and balustrades). The job includes: Sanding the deck back to bare timber (currently weathered/old finish) Smoothing edges, steps, and tight spots Cleaning & preparing the surface for finish Applying deck oil or stain (supplied or agreed upon) Requirements: Own equipment (random orbital sander, vacuum attachment, brushes/rollers) Experience with timber decking restoration Ability to complete efficiently and neatly Reliable, punctual, and professional Timing: Flexible - hoping before Christmas but understand if that’s not possible. Payment: Open to quotes. Please provide your estimate

I am seeking an experienced and professional flooring specialist to complete a high-quality refinishing of my indoor solid hardwood flooring and spiral staircase. This project requires proper equipment, attention to detail, and the ability to deliver a smooth, uniform, premium finish. Scope of Work 1. Timber Floor Refinishing (Approx. 40 m²) Sanding & Surface Preparation Fully sand timber floors back to bare wood using professional-grade sanding machinery Precision edge sanding and detailed finishing at corners, skirting boards, and transitions Surface preparation including: • Filling minor gaps where required • Smoothing sanding marks and imperfections • Levelling surface to ensure an even base prior to coating 2. Application of Premium Clear Coatings Apply 2–3 coats of high-quality, non-toxic, water-based clear varnish Light sanding between coats (if required) to achieve a smooth, uniform finish Materials can be supplied by me, or you may provide a quote inclusive of all materials and labour 3. Final Protective Seal Apply a final non-toxic protective sealer for enhanced durability and scratch resistance Ensure a consistent, even, high-quality finish across the entire floor area Maintain and highlight the natural timber grain and tone 4. Spiral Staircase Refinishing (14 Timber Steps) Careful machine or hand sanding of each step, including treads and risers Precision detail finishing on edges, corners, and curved spiral sections Application of matching varnish/stain and final protective sealer Consistent finish to match the main flooring area Extra attention to drip prevention, smooth transitions, and edge accuracy Additional Requirements: Use of dust-minimizing sanding equipment preferred Clean and tidy workspace during and after completion Professional workmanship with consistent coating results Clear communication throughout the process Option for on-site inspection before finalizing the price

Existing timber floor requires sanding back and refinishing with water based coating system. Approx 147m2 in total Quotes welcome

Floorboards need refinishing - looking for quotes

Seeking someone to buff/polish roughly 40 square metres of floorboards. (Wormy chestnut) Per the floor plan only the hallway and living area. Bedrooms and bathrooms are carpet or tile. Floors were fully sanded back 3 years ago with water based clear coat applied. Floors are in good condition with light scratch marks. I am not seeking perfection. Some marks may remain. But I won’t have a full re-sand done so soon as one was only done 3 years ago. I am seeking quotes. I will remove and replace my own furniture. Thanks

Open plan Living Kitchen Hallway -- wood flooring - needs sanding back and then varnished again

Sand old polish off and refinish floor boards in one medium sized room, one small room, small corridor and small foyer

We’re moving into a new office space that has 110m2 of existing engineered timber flooring. The current finish is too dark so we would like the floor sanded back to oak and then re-stained in a light lime wash finish. All existing furniture items in the space will be removed prior to works commencing.

Require sand refinish with satin varnish 80sqm of timber flooring

Bamboo flooring has a couple of marks that need refinishing 1. heat from the fridge has led to a scorch mark (see image) 2. water marks in other areas from pot plants 3. scratched floor from a desk chair

Urgent time sensitive. Need asap start. Just bought house, have 10 days before need to move in. Floors need work. Description of task: EXISTING FLOOR: - have 46 square meters of chevron timber floor in apartment. Don’t like the colour - need floor sanded and refinished to match lighter Color of timber flooring in bedroom Install New Timber Floors in Bedrooms - have all materials purchased - would like to remove carpet in each bedroom (each room is 10 square meters) and install new timber flooring (materials provided) - the living room refinishing of floor should match the new floors for the bedroom as close as possible - plank installation concrete stick - linear pattern (not chevron) Whoever can start first is who I will book Cost being offered based on what I have been quoted by a company but they can’t start until later New floor installation: 50 per square meter - 20 square meters = approx 1000 AUD Existing floor sand and refinish 34 per square meter - 46 square meters = approx 1,500 Happy to negotiate Need someone who can start asap

25sqm living room area timber floor. There are stains soaked in so it needs sanding + staining + coating. Maybe just half of the area as the rest are covered by sofa and carpet.