Find a fence installation professional in Melbourne

We have a fence that we need the cyclone fencing repaired. We don't need a new fence. Just the barbwire cyclone part needs replacing - about 30 mts required. Unsure of the going rate please quote.

Install lattice on top of existing fence

The gate needs to match the existing horizontal slat fence (see photos). I’ll be reusing the current slats, so the job involves building a new timber frame and attaching the slats to it. What’s required: * Build a sturdy timber gate frame (materials provided) * Install diagonal bracing to prevent sagging * Reattach existing horizontal timber slats to match fence spacing * Install and align hinges onto existing metal posts * Install gate latch/handle * Ensure gate opens/closes smoothly and is properly aligned Materials provided: * Timber for frame * Screws * Hinges * Gate latch You will need to bring: * Tools (drill, level, saw, etc.) * Any additional fixings required for mounting to metal posts Notes: * Gate width approx: 900mm * Height approx: 1600mm * Posts are metal, so experience fixing into metal is important * Want a clean, professional finish so it blends with the existing fence Attached is a mock up of the design we are looking for

I have bought the timber and need a 1.5m fence built in my front garden

Supply and install pedestrian gate. Will need post and/or trims or angles supplied as well. Will need to measure exact before fabrication. Desired finish attached Batten appearance on both sides of gate with keyed access. Approx 900mm wide and 2100 high

Need someone with the experience and tools of installing and fixing fences, to install approx 14m of timber fence plinth boards along the side of the house on existing fence. Also, to stabilise one wobbly fence pole and fix the indoor fence latch. Plinth boards are already purchased Easy access and unlimited free parking at the house

Description: Looking for an experienced handyman/shopfitter to supply and install a movable shopfront gate. Requirements: * Gate can be sliding or folding (open to suggestions) * Must be able to fully open and secure/lock against the wall (so shopfront is clear during trading) * Must have a secure locking system when closed * Suitable for commercial use (durable & safe) Other details: * Please advise on best design and materials * Quote should include supply + installation * Happy for you to inspect site before quoting Photos/reference can be provided.

Supply/install of a treated timber fence, including posts. Current fence is rotten. 4.2m length x 1.91m height (approx). To be installed between 2 ground floor units. Easy access. We work from home so can accept you any day/time. (Fee is for timber & install. No requirement for rubbish removal. I will dispose of the old fence)

Hinge has snapped on steel gate -supply hinge, screws and all tools/materials -grind off old hinge - screw in new hinge and square up gate

Looking to replace an existing side boundary fence along a laneway (about 19 metres long). Current fence is roughly 2.7m high on the laneway side and about 2.4m on my side. Happy to keep the same height/profile. Job includes: Remove and dispose of existing timber fence Supply and install new timber paling fence I’ll remove all vines/vegetation beforehand so fence will be clear and accessible. What I’m after: Total height around 2.7m from laneway side (including plinth) H4 treated pine plinth (150–200mm) 100x100 H4 posts, concreted in (around 700mm deep) Posts max 2.4m apart 3 rails minimum (prefer 4 given the height) Solid paling lower section with simple lattice or similar on top Access is a bit tight down the side but there is laneway access. Just after a clean, straight, standard job — nothing fancy. Please include removal and disposal in the quote. First two photos are the current fence, last photo is the style I’m after.Happy to consider similar simple options if there’s a better/stronger way to build it at a similar price point

Our timber side gate is still attached, however when the fence was replaced a few years ago the supporting gate post was removed and never properly reinstalled. We need someone to: * reinstall / secure the gate post into the ground * align the gate properly * make sure it opens and closes correctly * check latch is working (or advise if replacement needed) We’re hoping to get this done as soon as possible, as we’ve recently got a new puppy and need the side access securely closed again. Located in Pascoe Vale South. This week would be great Please quote including materials if a new post/concrete is needed.

Part 1 Leaning Fence - Reset crooked wooden fence post(s) and straighten fence Part 2 Drywall fixes - Approx. 20 cracks (and one bulge around window frame) throughout the house need patching, many can be filled but several will require a new piece of drywall to be installed

Old timber fence has started to fall over. Looking for a new fence with extra height. Hoping to reuse current gate. Current fence is approx 6 metres including gate and 190cm tall. Include taking away old fence please.

Looking for a carpenter/handyman to supply materials and complete a gate job at my property in Malvern. Scope of work: 1. New Gate (Main Job) * Cut opening in existing timber paling fence * Supply and install 2 new posts * Build and install timber gate * Include all hinges, latch and drop bolt * Match existing fence as best as practical * Doesn’t need to be high-end — just solid and functional 2. Fix Existing Side Gate Side gate currently not closing properly Needs adjustment Requirements: All materials supplied by you Must be sturdy and built to last Previous experience with similar work

Rotten and broken fence picket x 1 needs repainting and replacing

Replace rotten timber frame with 90x45 treated pine. Size is 1m x 2.5m. Reuse existing corrugated tin. Timber and fasteners to be supplied by tasker. No concrete pouring required, frame can be attached to existing shed wall and to corner post.

Install a new gate latch and lock (provided) on a metal gate and wooden post. Metal gate will need some new holes drilled.

I need a new latch supplied and installed on an existing timber gate. The current latch is broken. The job will involve: • Removing the existing latch hardware • Supplying a suitable replacement latch (strong, weather-resistant, suitable for an external timber gate) • Aligning and installing the new latch so the gate closes and secures properly Photos of the gate and existing latch are attached.

Pool gate was taken off by previous owner and we wish to have it rehung. Screws and brackets still exist, just need a professional to hang it

Need the back fence only replaced my fence is 3 metres in length