Find experienced local fencing contractors near you

I'm hoping to have a high quality timber front fence installed with manual driveway gates, pedestrian gate and new brick / bluestone path created.

Hi 👋 I’m looking for someone to install a sturdy wooden post in my yard and mount/bolt a garden hose reel onto it. What needs to be done: • Supply and install a suitable treated timber post (happy to discuss options) • Dig footing and set post securely in concrete • Make sure the post is straight, level and solid • Bolt my existing hose reel onto the post • Clean up after the job When: Flexible – anytime in the next 1–2 weeks Tools/materials: Please bring required tools. Happy for you to supply materials or advise what to buy. Looking forward to your offers. Thanks! please refer to images. These are two posts one is loose and the other is off the ground. Looking for reliable job to be done.

Looking for an experienced handyman to install a small garden fence and gate along the front edge of the artificial grass, 2 posts on soil and 2 posts on decking ( not to be installed on the turf itself) Ground along the fence line is slightly sloped. Fence and gate need to be solid and rigid! Material already purchased and provided: - 3 metal fence panels - 4 posts - Hinges - Brackets Notes: Anchors/bolts/ concrete not yet purchased (please include supply of required fixings in your quote)

90m aluminum fence monument colour

2 x side gates purchase and install Block off both sides of the home to keep dog secure $400+ materials you supply receipts for

Hi! I’m looking for a skilled handyman or fencing professional to remove my old garden gate and install a new picket-style gate. I will paint the gate myself, so I only need supply and installation of the gate. I'll also dispose of the old gate myself. Details: - Gate size: approx 1.5m wide x 1.8m high - Style: picket fence gate (timber preferred, but open to advice) - Needs to include: hinges, latch, posts (if required), and all hardware - The site is easily accessible - Flexible with timing Thanks!

I have a wood garden gate with a latch on inside and a lever on the outside to open when not Locked. I need to have groove cut so that I can open the gate from the outside with the key when the gate is locked with a padlock

Put up wood fence............

Remove existing dilapidated brushwood fence and replace with 1200 h green coated metal tubular fencing similar to other existing fencing on property. Main run is approx 10m with 3m return. Return section from boundary to house to include a pedestrian gate. Access is available from both sides. Task includes removal and clearing away of existing fence, installation of new posts with concrete footing. 2 photos show existing brushwood fencing and other fencing on property 2 photos are examples of fencing type required, - current fence has ‘fleur de lis’ tops but these are not prefered for new section

Replace 2 sections of fencing similar to existing fence. • horizontal treated pine slats 65mm/12mm gaps • remove and recycle existing fence • painting not required • photos attached with details and measurements Please include cost of labour and materials in your offer

We have a 1.8 x 0.6M wooden garden fence panel on our balcony that needs to be securely attached to the concrete wall, probably with 4, maybe 5 anchor points. A photo of the panel and wall piece is attached.

Latch on garden gate needs to be replaced. I have bought new latch so its just the labour

Need to replace the lock of backyard garden gate. Pics see below.

W'e're looking for an experienced handyman/carpenter to relocate a garden gate. * Remove existing gate and fence section from current position (photo) * Re-install the same gate a short distance away (see photo of plan) * Re-hang and level the gate so it swings and latches properly * Re-install or adjust hinges/latch as needed * If required: install new fence section and/or set posts in new position (happy to cover cost of concrete and materials)

Looking for someone to attach our garden gate. The fencing people attached the hinges to the hollow post without a timber sleeve or anything for the screws to grip into. The screws came loose in the wind over time until the gate fell off. You will need to provide the wood.

Hi guys, One piece of my raised garden retaining wall timber is rotten, and need replaced! Need you to source and replace for me. Timber size is 2310mm * 200 mm * 55mm Please see pictures

Pour concret slab ( or a mix of slab and pavers ) to consolidate garden fence. As per the picture, the concrete around the fence’s posts is now above ground. I’m open to any other ideas. Please supply all materials.

My small garden has a wooden fence and several of the planks are falling off. I reckon I need less than 1 hour of a handyman's time to nail the planks back where they should be. Have received a quote for a colorbond replacement but WOW that's expensive! So looking for a cheap quick fix.

My dog is trying to dig under the fence to escape - wanting to somehow secure it.

Hi there, We have just rendered and painted our external wall and had to remove our garden gate in the process. We have restored the gate and now want to reinstall. The brackets are very old so we may need to buy new hardware and a lockable latch. We are away and have Airbnb guests coming Sunday. We would love for you to go and look at the gate to see what hardware is needed, then go to Bunnings to purchase, the come back to install. We will of course pay for the required hardware. Would love for you to install tomorrow :-)

I need install gate on my container .need to cut and gate install on it

Small gaps and holes in fences where the dogs can get under. Small sausage dogs so they can fit under small gaps. Just need it bricked up or possibly some wooden planks installed

Re attach Drop Rod and repair Ground Stopper/Catcher of a gate

I am looking for someone to put up two dog gates that will need to be weatherproof as they are outside. Open to ideas on materials.

Install cat gate on veranda/porch, preventing the cats from escaping Have no equipment or tools, nor the gate TENSION gate preferred (able to reverse it if needed) Examples below W 175 cm x L 200cm

Install wire fencing to star pickets to approx 150m2

Need help installing a dog gate. Gate is already assembled — just need two posts fixed securely to the floor and gate attached/aligned. Must be level and sturdy. Looking for someone with the right tools and experience.

2 x side gates purchase and install Block off both sides of the home to keep dog secure $400+ materials you supply receipts for

I'd like a fence constructed, similar to what is pictured, 25 meters (give or take).

Just moving into.a flat and I need 2 basic dog fence/gate at each end to keep him in and safe. Nothing to expensive or fancy as im on a pension.

Fabricate / Weld custom site access frame and gate as per attached design. Supply all materials. Steel to be HDG Please discuss with me suitable steel thickness before build. Gate to swing both ways

Build an area for my dogs to play while being protected by snakes

We have a partially built dog fence, star pickets are in place and the first role of dog fencing is attached but two roles to go. Also we have a gate that needs to be fixed.

I need to build pet enclosure in backyard - timber frame - wire on side (i have it) - colorbond roof (i have it) I need it done soon

Finish putting together steel Dog kennel. Needs an impact driver.

Need new cattle fencing installed - 100m on one side and 200m on another place of the property. Need someone to do it all.

My dog is trying to dig under the fence to escape - wanting to somehow secure it.

I will need to have a wire barrier installed underneath the house, to keep the dogs from getting out. I have two metal gates which might be good option, they will need to cut to size. It will need to be secured to the piers.

I have the fence and most of the materials including the gate. I just need it all put up. I’m happy to go get any more materials needed. There’s also a wooden gate one the other side that I want to ensure is secure. This is all to keep dogs secure. I need to not damage the garage though in any way.

Make a proper door for dogs between 2 unit .

Just after a back gate put in my colourbond fence.

Colour bond fence repair Or replace the panel if easier Refer to photos needs to be fixed Location in earlwood flexible when it can be done Photos provided from both sides can provide more if needed

One of the colorbond fence posts need replaced. Post and old concrete need removed. Then a new shale grey fence post needs put in with new concrete. Also need side green fence temporarily fixed as the pressure of a tree has popped one of the panels out. Home is occupied by a tenant. And is currently on market for a new tenant, so need this done asap. Grey fence is at front of property and green fence is at side between neighbour. Thanks

im looking at getting an 1800h colorbond fence installed. color to be ironstone. I will have existing fence removed, so price is just for supply and install of roughly 9 meters of fence.

The colourbond fence posts are attached to the timber retaining wall. Steel stiffners need to be added to each attachment point, to prevent fence movement.

Super Six fence leaning over. Needs to be straitened up and supported

I need to install a colour bond gate, both sides have brick, the area is 1.25 m long

hatch needs repair as it has broken due to the winds on colourbond fence

3 metres width Colourbond gate needs to be replaced with something less expensive. The gates are damaged. This area is prone to high wind.

Replace panels of colourbond fence - View all the details of this offer: https://www.airtasker.com/offers/01KCAQSX8WKQFJ4M4SA6F6FP8E

Close gap in fence with colourbond sheeting (already have). About 50cm x 100cm space

2.1 metre high Colourbond fence - 4 metres section , damaged by fallen gum tree ( tree now removed ) . Have purchased new Colourbond fence panels with sheets rails posts and screws . Just require installation only . Must have fencing experience

One fence panel needs fixing

Need 8 l/m fencing installed at my gravatt. 3 holes dug all materials onsite incl rapid set 2-3 hours work

The sheet of colourbond has come away from the frame and need it either fixed or replaced asap . Happy to negotiate

One colourbond panel needs to be removed and replaced with new one. Panel will be provided. Labour only

We have an existing 17m wooden fence which is falling down. I need someone to remove (and dispose of) that fence and install a new Colourbond fence (also 17m). I've bought the fence already, but will need you to supply concrete etc for the posts

Will need to carefully remove existing post footings which were cemented in after the Travertine tiles and brick fence behind (see red arrows in picture attached on posts to replace) - may need small jack hammer or hammer drill. Then install both new posts and re-attach fence.

I have a matrix fence extension and the legs for assembly. I need someone to attach it to the fence top. Length is only 2400mm