Find a local electronics repairer in Melbourne

Experienced handyperson to seal and paint gaps at the bottom of 3 window frames in my 1930s apartment before a building inspection this Monday morning. Tasks required: • Clean out old, loose sealant or debris from the gaps on 3 windows. • Supply and apply appropriate flexible gap filler (e.g., Selleys No More Gaps). • Use a foam backing rod if any gaps are deeper than 6mm. • Paint matching: I do not have paint. Please help me match the white/trim colour and apply a neat coat of paint over the filler once it skins over. Timing: Ideally completed Friday (tomorrow) or Saturday morning so it can dry fully before Monday. I will reimburse the cost of the gap filler and a small sample pot of paint upon presentation of the Bunnings receipt. Any advice from an expert welcome!

Works needed: - quick waterbased painting touch-ups – not full walls, no sanding, just basic cover up for areas with bad stains, light water stains, marks, scuffed corners. - minor surface repair and sanding in a ceiling corner that has had water damage (less than 1 sqm) We're looking to just refresh the apartment for quick sale. Looking for someone with an eye for detail that can do these types of touchups well. IMPORTANT - PLEASE READ BEFORE RESPONDING: - When you reply, please provide an itemised quote, with labour and material costs shown separately. Please also clarify if your quote includes GST or Airtasker fees. - I will not be supplying paint. That needs to be included in your quote. You need to pick a paint that matches the existing walls as best as possible, both in terms of colour and finish.

Need repair of logitech pro x 2 lightspeed. Right side went completely silent all of a sudden when working completely normal before

Fix chipped floor boards

CUSTOM MADE GLASS TOPS BEDSIDE TABLES NEED CUSTOM CUT GLASS FOR TOPS NEED DONE ASAP!!!!!

Repair plasterboard / wall damage & repaint Looking for someone experienced with plasterboard repairs and painting to repair several areas of wall damage before we move house. Work includes: Areas where adhesive has pulled away paint and the top layer/paper of plasterboard, including one larger horizontal section and a bedroom wall A handful of screw/anchor holes Several smaller nail/picture holes Remove/scrape any loose material Seal exposed plasterboard where required Fill/skim, sand and prime all repairs Repaint repaired areas/walls for a clean finish We already have the matching wall paint for all areas. Happy for you to supply the remaining repair materials (filler/joint compound, sealer, primer etc.) and include them in your quote. Photos attached show the main damage. Nothing structural — mainly surface/plasterboard and paint repairs. Looking for a professional finish where the previous damage/repairs aren't visible.

4-6 chips to white and blue/grey wallpaper and paint

Need 2 blind cord clips to be installed on a brick/cement window frame. First photo is what needs to be done.

Grouting needing to be redone in shower

Looking for a handyman to install 4 child safety cord clips/cleats for my roller blinds to meet Victorian rental compliance standards - 2 x timber, 2 x cement/brick. I already have the official safety clips, but they need to be drilled securely into the walls. Screws for timber fittings provided (x 2). Will need you to provide screws for cement/brick (x 2).

Tap handle is worn out, needs replacing.

Need washing machine water puors connected to Communal laundry that has one set of taps. Appears to require connectors.

Looking for someone experienced with plumbing to replace the sinks taps in the bathroom, I don't have replacement taps yet as im not sure which to buy, so the person who accepts the job can find the suitable ones, cheers

I need help replacing the lamp shade on my hanging lamp with a paper lantern. The lamp is suspended over a stairwell with no easy way to access it You will need to bring your own ladder/equipment

Need help to jumpstart my car now

-Report (emergency last week and couldn’t get done) -4 magnolia little gem stumps to be removed. -7cm to 15vm approx diameter. They were cut down to 15cm above ground 12 months ago. -on raised garden bed.

Looking for a licensed electrician to carry out an electrical safety inspection and issue a Certificate of Electrical Safety (COES) for two small, adjoining retail shops (25 m² each) in Melbourne CBD. Power has been disconnected during vacancy, and the distributor requires an official COES to turn it back on. Exactly What Needs to Be Done Switchboard Assessment: Inspect circuit breakers, RCD safety switches, earthing, and main switches for both units. Electrical Safety Testing: Perform mandatory testing (insulation resistance, polarity, earth loop impedance, and continuity). Visual Inspection: Quick visual check of power points, lighting, and accessible wiring across both 25 m² spaces. Main Switch Protocol: Ensure main switches remain safely turned OFF ready for distributor reconnection. What Is Required at the End Official ESV Lodgement: A Certificate of Electrical Safety lodged directly through ESVConnect (Energy Safe Victoria). PDF Copy: A digital copy sent immediately so it can be provided to the energy provider.

Tap Needs replacing in the wash basin ; Apartment in first floor

Install a bidet hose and tap for the toilet Replace/replumb the hot and cold water mixer under the bathroom sink Replace the shower taps All parts and fittings have already been purchased.

We’re moving out of our South Yarra apartment and want to get it inspection-ready to secure our bond back. Looking for a general handyman to come give the place a once-over and patch up minor marks and damage before our final inspection. What we need: • Walk through the apartment and touch up scuffs, marks and small dents on walls and ceilings (paint colour matching where needed) • Fill and patch a few small gouges/chips (wall corner, architrave, wall dents) • Supply and fit a cover plate for a double power point that’s missing its faceplate • If possible, repair a small chip in a floor tile — happy for you to take a look, but not a dealbreaker if it can’t be done Please bring your own filler, paint/touch-up supplies and a standard power point cover. If you need us to confirm the paint colour or socket brand beforehand, just message us. Melbourne / South Yarra. Flexible on timing except for Monday as the cleaners will be there — let us know your availability and quote. Thanks!