Find trusted local electricians in NSW

I need mesh put around solar panels on roof to stop birds nesting. 2 story house.

2 ceiling downlights have stopped working in my apartment: • 1 × Laundry • 1 × Master bedroom corridor Existing lights are Warm White (approx. 3000K) supply & replacements to match existing colour and brightness as closely as possible. Looking for a licensed electrician who can supply and replace both with suitable matching LED downlights. Easy access, standard apartment ceiling lights. Photos attached. Prefer someone local who can fit this in between jobs.

Replace or fix a in a airbnb unit

I need the light fitting replaced. Please note that it is above stairs.

I need to remove two air conditioners and from a house next door and install it inside my house And make sure it is working

My outdoor light fixture is broken and I need it replaced. I have the new one to replace it with I just need someone to come and connect it

Looking for a licensed electrician to complete three specific pieces of installation work in my home. Materials (power outlets and Ethernet cable) will be provided—you just need to bring the tools, expertise, and standard mounting accessories. Scope of Work: 1. New Power Outlet #1: Install a new power point less than 0.5m below from an existing power source. Network box 2. New Power Outlet #2: Install a second new power point on the back-to-back/opposite side of the wall, drawing from the same nearby source. Laundry Room 3. Ethernet Cable Run (~10m): Run the provided Ethernet cable from an existing RJ45 port, up through the wall cavity, across the ceiling space (~10m run across one bedroom, note there is ceiling insulation), and down to an alarm panel location. Note: The alarm panel is already tested and ready to connect.

Lawn Mowing & Yard Clean Up (Overgrown Grass - Front & Back) Hi everyone, I’m looking for an experienced gardener/tasker to tidy up the lawn and yards for a property that has been unoccupied for about 6 months. The grass and weeds have become quite overgrown and need a thorough cleanup to get back in shape. Scope of work includes: Lawn Mowing: Front yard, driveway strip, and a larger backyard section (as shown in the floor plan). Whipper Snipping & Edging: Trimming edges along fences, paths, garden beds, the garage, and shed. Cleanup: Blowing and cleaning up pathways, driveways, and the porch area after mowing. Green Waste: Option A: Please take the green waste away with you (tip run). Option B: All green waste can be left in the green bin on-site. I have attached a floor plan showing the green/grass areas for your reference. Please let me know your offer and whether you can include waste removal. Thanks!

Looking for a licensed electrician to do a small lighting job in a salon/treatment room in Paddington. I need: • Existing hanging/pendant light removed • Replaced with a recessed LED downlight to match the existing downlight in the room as closely as possible • Existing light switch changed to a dimmer switch • Please make sure the new downlight is dimmable and compatible with the dimmer • Ideally I’d like the finished result to look neat and flush with the ceiling I’ve attached photos of the existing light, nearby downlight and switch. Need you to supply the downlight/dimmer — please include materials in your offer. Must be a licensed electrician.

We have an outdoor light that won’t work and need an electrician to come have a look at it.

We have a commercial food steamer imported from China. The machine is rated: 220V 3000W / 3kW Approx. 13–14A operating current It currently has a Chinese 16A large-pin plug which we have been using through an adapter into a dedicated Australian 15A wall socket. The adapter has now broken, so rather than replacing the adapter, we would like a licensed electrician to remove the existing Chinese plug and install a proper Australian 15A plug directly onto the appliance cable. Would also like you to: Inspect the existing cable/termination for any heat or electrical damage Install a suitable heavy-duty Australian 15A plug Test the appliance after installation to confirm it is safe and operating correctly The existing dedicated 15A wall socket is already installed — no new power point or wiring is required. Please include the 15A plug/material in your offer if possible. Must be a licensed electrician. Budget: $130

Looking for someone experienced with rangehood or appliance repairs to diagnose and repair a lighting fault. Both lights have stopped working. I don’t know whether the problem is the bulbs, light fittings, power supply or another part of the lighting system. Rangehood model shown on the label: IRI6SE1. Photos of the rangehood, lights and inside of the unit are attached. $120 budget for diagnosis and repair labour. If parts are required, happy to discuss the cost before going ahead.

I need this plug socket moved about 30 centimetres across to the right as I’m going to have a built in wardrobe installed and don’t want it inside the wardrobe. I also have a table lamp I need someone to look at. It keeps flickering.

My outdoor sensor light which is controlled by a switch is turning off and on at night unexpectedly even when switch is off. When it is switched off, it still turns on/off and there is no way of turning it off at night. I believe it might be a faulty switch or sensor.

We have two ceiling lights that have never turned on and we want to assess whether its just the bulbs or a wider wiring issue. We need more light in this room so ideally want to change the ceiling bulbs and shades but currently have these very heavy, dated covers attached. Initial fee is for callout and assessment and we can negotiate total cost when we know what the issue is

We have about 6 downlights in our office that need the globes changing over. You will need to supply the globes. Our office is located in Surry Hills and is open between 9am-4pm.

The RCD labelled “Protected Power” (C20, 30mA) trips the instant I switch it on, so all power points are dead. Lighting circuit is fine. Cause is known: insecticide spray went into one power point and the tripping started immediately after. The RCD has been off since and I haven’t touched the outlet. What I need: the affected outlet inspected and replaced, and the circuit tested.

Electrician / Pump Specialist Needed: Rainwater Pump Tripping Fuse Description: When I turn on my rainwater tank pump, it immediately trips the electrical fuse/circuit breaker. I need a licensed electrician or pump specialist to diagnose the issue and repair it

Wiring issue while painting and house electricity has shorted. Need electrician. Only quote if available today please . Prefer hourly quote.

Run new wire from doorbell to electrical box No existing wire Transformer will be provided