Find a professional computer repair service in VIC

Custom-built PC was working fine before moving. Since reconnecting it, it’s making a loud noise, running extremely slow, crashing with “Your device ran into a problem” and shutting down/restarting by itself. Looking for someone to diagnose and repair it at my home.

Our latest investigation has revealed that the fault lies within the internal patching between the NBN (National Broadband Network) port and your designated customer port within the building. To resolve this issue, we kindly request your assistance in contacting your building management. The internal patching between the NBN port and your customer port needs to be examined and rectified by professionals who specialize in building infrastructure.

Repair Epson docket/receipt printer is not connecting

I have all the parts and everything wired it just don’t boot up

Need to arrive on site at 5am to assist people in using a new system. Very simple task, must be punctual. 5am-8. 30am. Time is fixed. Must complete 10 min induction anytime prior the day. Needs closed shoes, preferably steel cap boots.

Need to repair the OSD joystick on the monitor, manufacturer has offered a limited refund to find a repair from a local technician, they believe it is only a short circuit in the button mechanism as the monitor is otherwise functional. would need the back cover popped off and then diagnosing and correcting the short

I have just purchased a new printer as per the photo. I would like someone to come and set this up and connect to my PC’s etc.

Epson ET-2820 not turning on. When it was on the scanner wasn’t working and was showing error message 100016

Need someone who is very experienced with computers to diagnose why my motherboard is not working. I have taken off the CPU check the pins re-put the cooling paste on and the cooler rebooted. It re-ran the bios to the initial state. I need someone who knows what they’re doing to have a look to see whether I need to buy a new motherboard or not.

Hi, I have just built a brand new PC and I need help getting it working. Looking for someone experienced with PC building, Intel systems, DDR5 memory, and BIOS troubleshooting. The PC powers on, but I cannot get any display output or enter BIOS. I need someone who can troubleshoot the issue and help fix it (including BIOS update if required). specifications: * Motherboard: MSI PRO B860M-A WIFI * CPU: Intel Ultra 5 250K Plus * AIO: Arctic Liquid Freezer III 240 * RAM: V-Color Manta XSky RGB DDR5 6000MHz CL36 32GB (2x16GB) * GPU: Using IGPU * SSD: Lexar NM620 256GB PCIe Gen3x4 M.2 2280 * PSU: Corsair RM650e (2025) Fully Modular Current issue: When pressing the power button, the PC does not display anything on the monitor. Originally, the startup sequence was: 1. CPU red debug light flashes briefly (~1 second) 2. DRAM yellow debug light turns on for around 3–4 seconds 3. PC stays on for around 30 seconds 4. CPU red light flashes again 5. PC restarts automatically This reboot cycle repeated around 5 times, then sometimes the PC would stay powered on: * RAM RGB on * Arctic AIO running * Case fans running * No debug LEDs staying lit * But monitor still shows “No Signal” Troubleshooting already attempted: * Cleared CMOS multiple times using motherboard Clear CMOS button * Tested both RAM sticks separately (one stick at a time) * Reseated RAM multiple times * Removed RAM completely to test motherboard DRAM detection * Reseated CPU * Tried different HDMI cables * Tried different monitors * Tried to enter BIOS using Delete key Additional info: * I do not have a wired keyboard, only a wireless keyboard with USB receiver * The mb does not appear to have a BIOS Flashback / Flash BIOS button, so I cannot update the BIOS myself without the system successfully POSTing. * I also tested the system with no RAM installed: * DRAM yellow debug light stays on continuously * No reboot loop occurs * No display output * No beep (no motherboard speaker connected)

My laptop is an HP with an Intel Core Ultra 7 processor. My monitor is an HP P244, which supports 1920 × 1080 @ 60 Hz. Connecting them is straightforward. Option 1: USB-C (Recommended) Many newer HP laptops with Intel Core Ultra processors support video output through USB-C. 1. Look for a USB-C port on your laptop (small oval-shaped port). 2. If it has a ⚡ (Thunderbolt) or DP (DisplayPort) symbol, it can usually drive an external monitor.

I have an issue in my Yoga 7 14irl8 laptop key board as some keys are not working. Need a replacement of the keyboard.

Hi I am currently going through domestic violence. I secured some cameras through orange door ect but I am having issues connecting to the wifi. Is there any kind souls who might be able to help me set this up asap. So I can feel a bit safer. Thanks so much 😇

I've recently bought some MoCA adapters to try and get wired internet to one other room. My house has foxtel and some other coax ports all over the house but when I connect the MoCA adapter, they can't find each other (MoCA connection light stays off). I know the adapters are working as they can be connected directly with a coax cable and the light comes on. I believe the problem is to figure out whether the coax cabling/foxtel ports are actually connected throughout the house and how to connect them if they are not. I need someone who may be able to help with solve this issue and get the wiring/internet fixed in the other room. Thank you.

Currently having an issue with internet not connecting. Currently connected to wifi and we checked with nbn and kogan and network is fine. The belong modem always opens on the modem/router login page

My Desktop PC will not boot into Windows. I can get into the BIOS but not start in Safe Mode. It is currently booting into the Motherboard manufacturer image. I do not understand enough of the BIOS to know if I can do anything there. I would appreciate someone coming over ASAP and getting it booting properly again please. I need my PC to find and apply for jobs.

Need an experienced IT technician to set up a new office internet and phone system. Tasks: * Install and configure a NetComm NF18MESH router * Connect and test NBN and Wi-Fi * Set up Yealink VoIP phones * Patch and test existing office network outlets * Confirm incoming and outgoing calls work Existing network cabinet and cabling are already installed. Equipment supplied. Location: Dandenong South Timing: ASAP Please include your experience, availability and price.

Need help troubleshooting connection of my printer and also my new computer screen. Screen keeps going to sleep and is not talking to laptop.

I need a hard drive installed into a gaming computer. The hard drive is a iron wolf and I understand that I will just need to be connected to the cables

Existing network need help to reset and set up on new computer and add one outdoor device. At the moment we have 3 access points Templestowe location