Find experienced local carpenters in West Melbourne

I have a large wooden desk from Mark Tuckey. It looks a little tired and needs (I think) a oil finish and fixing of some recent damage to a corner of a drawer. It will need to be done in place (it is too large to move) - Due date: Flexible

I would like to get recycled/reclaimed timber floorboards installed. The site is a first floor warehouse conversion apartment. Very open plan - basically one room and a raised platform for the bedroom. Approximately 70m2. Currently the flooring is engineered boards installed over vapour barrier on concrete slab. I've included a picture of the look I'm after - happy for it to be somewhat rustic/have nail holes, thinking reasonably narrow boards perhaps 80mm wide. Parking is not an issue right out the front but there is no lift so access will be somewhat difficult. This will be done as part of a larger renovation and therefore all furniture will be removed from the apartment. Would like a quote for installation including finishing and sealing and a rough idea of ball park for materials - I realise this will depend on the boards actually chosen. I would be keen to get this done in late march. Price on this task is for coming and quoting. - Due date: Before Friday, 31 March 2023

I have designed and had the pieces CNC cut for 5 wall cabinets (1200x400x300) out of birch ply. I need someone to assemble these including sourcing and installing hinge hardware and finish them off - sanding and painting. I would ideally like the corner detail as shown in the third image (pieces have been cut on 45degree angle) The pieces are at my place in West Melbourne and ideally you would be able to collect them tomorrow morning (or I could drop them off if you're located in the inner north or western suburbs as I'll be driving out to Ballarat tomorrow. Price is exclusive of hardware/paint ect - Due date: Flexible

Extend existing bench approx 90cm & install 2-door cupboard under. Match existing benchtop & cabinets as much as possible. - Due date: Flexible

Build 2 shelves with hinges. Shelves need to be able to lay flat against the wall as access to switchboard is needed (see pic). For shelves to stay up, there should be a holding mechanism right opposite (see pic) Please include material costs in your offer Dimensions: 10cm thick for holding mechanism 90x150cm for shelving boards - Due date: Before Friday, 16 December 2022

Apply deck cleaner and apply three stains stains and deck cleaner provided - Due date: Needs to be done on Wednesday, 7 December 2022

My bike tires left stains on my light colored wooden floors and I’ve been unable to remove them. I’ve tried using magic eraser sponges with minimal success. I need someone with more experience to help me remove the stains. The stains themselves aren’t large and are limited to two places. - Due date: Before miércoles 23 de noviembre de 2022

I have a freezer display ( https://ozcoolers.com.au/products/liebherr-flat-glass-slide-lid-chest-freezer-efe-1152?currency=AUD&utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping&gclid=Cj0KCQiAgribBhDkARIsAASA5buDlMM4TvQtGNZPju54v15dq-lrYr4lXzNOiGYHDqdiXYaKy1zRkXwaAustEALw_wcB ) I need welder to build up a stainless steel stand with movable bars in it to fit the ice cream tubs, who also needs to find a material suplier. The material and work fee are included in the price. Thank you

Need a stain removed from the carpet - Due date: Needs to be done on Friday, 4 November 2022

I have two maintenance tasks to be done in my kitchen. 1. One of the cupboard doors has fallen off and the hinge broken. Here is the information on the cupboard according to fixtures and fittings schedule. Type: Laminate Finish: Satin Black Brand: Golden Home 2. There is a light strip along the backsplash that keeps falling down on one side. You can see my pictures for more info. - Due date: Flexible

Hi, We have two Ikea PAX wardrobes (brand new, not yet assembled). The wardrobe frames and shelves are particle board. Carpenter needs to cut 2cm off frame and shelving pieces, plus drill holes. To be done ASAP. Day and time to be arranged. **no drawers or metal pieces. No doors. See attached image. Builtin Wardrobe area: length is 149.5cm and the PAX wardrobe 150cm in length. Builtin Wardrobe area: depth is 57.5cm, and the PAX wardrobe 58XM deep. Hence we require the frame and shelves to be cut by 1-2cm. One of the frame pieces will be discarded and holes to be drilled to one of the other frame pieces, to make the width reduce by 1.5cm. So some holes need to be drilled in the particle board sheets too. Have a drill and can drill the holes and install if someone just wants to cut the sheets, but would prefer the full service of install.

Extension of an existing kitchen bench - Due date: Flexible

Hi, We are in the middle of a kitchen renovation in an apartment on Queens Rd. Easy parking and close access to elevators. The original cabinet maker has made the carcasses and installed most of the drawers. As we wanted Elton Group boards for doors and drawer fronts (which have already been purchased), we were advised to seek a cabinet making company with the requisite machinery for the cutting, edging and installation of these doors. It’s a large kitchen with a 3m island. We can supply photos, scale diagrams and detailed information about works already done as well as works to be done, but first wanted to reach out to see if you are able to take on this project. If so, please let us know if you require more information, and / or when you could inspect the site for a quote. Kind Regards, Lindsay Gravina

Hi. I just leased a 2.9 metre * 4.6 metre shop. I need someone to put 2.4 metre high slatwall throughout the shop with drawers on the base. also need a custom repair table made 1.6 m long and 0.8 high with some drawers

I’m looking for someone to repair skirting board edges. There are 4 separate sides that need to be repaired. Please refer the photos attached. - Due date: Flexible

reposted!!! as previous airtasker ghosting me after accepting the job. basically i need this drawer front panels replace with similar materials. as currently its damages (still working fine, just the look i am not happy with) looking for someone reliable no time waster pls. (just two drawers front panels not the entire draw) location: west melb near flagstaff garden - Due date: Flexible

Small shed to be assembled in courtyard in West Melbourne. 1500x780x1800Hmm Had another air tasker start the task today but unfortunately had a family emergency to attend to. Silver edging has already been put on sheets (sides). See images for details of shed. Please provide quote.

Hey Zac Hope you’re having a good day off! I’m about to purchase a few kitchen floor cupboards (no overhead cupboards) and I’m wondering if you might be able to remove the existing cupboards (same number) and install the new ones? I’ve attached the IKEA drawings to give you an idea of the work involved. Looking forward to hearing from you. I’m in West Melbourne 3003

To replace 2 x display panels on a display frame. Flat concrete base for ladder. - Due date: Needs to be done on Tuesday, 15 March 2022

2x plinths at skirting board height to be built to allow x2 built small wardrobes from ikea to fit into space. wardrobes will also need to be lifted/fitted on top. - Due date: Flexible