Find experienced local carpenters in Melbourne

I have a kitchen cupboard which needs to be cut down to size. We have recently purchased a new fridge and require the cabinet above the fridge to be cut.

Looking for an experienced carpenter or shopfitter to inspect and quote for a commercial fit-out job in Brunswick. Budget is negotiable. We’re currently looking for quotes and different solutions. A site inspection is preferred before providing a quote, as the existing conditions are easier to assess on site than from photos. Scope: * Enclose the gaps around an existing train carriage. * Build a timber frame (or recommend a suitable structure). * Install cladding/panels to match the existing white weatherboard wall as closely as possible. * Custom cutting required to follow the train carriage profile. * Looking for recommendations on the best materials, quote, and estimated installation time. Site inspection preferred before quoting. Please let me know if you’ve completed similar commercial or shopfitting projects.

I'm looking for an experienced cabinetmaker/joiner to build and install a new commercial café front counter at #8 Coffee in St Kilda. This is the first stage of a complete café refurbishment. If we're happy with the workmanship, there will be a second stage (4.46m rear workbench) for the same cabinetmaker. Front Counter Approx. 2000mm wide x 600mm deep x 900mm high Commercial laminate cabinetry (or optional engineered stone benchtop if competitively priced) Recessed 550mm SAYL pastry display Integrated Polar CX574 display fridge Commercial quality suitable for daily café use Soft-close doors/drawers preferred Important Concept drawings supplied. Site measure required before final quote. Looking for someone who can also suggest improvements to the design. Installation required. Experience with café, retail or commercial joinery preferred. Please include Photos of similar work. Approximate timeframe. Whether you manufacture yourself or outsource. Warranty on workmanship/ Budget shown is indicative only. Final price will depend on site measure, materials (commercial laminate or optional engineered stone), and agreed design.

I have a solid timber buffet cabinet that is approximately 5–10 mm too wide to fit into an alcove in my apartment. The cabinet body fits—the issue is the decorative timber moulding around the base. I’ve already started removing part of the moulding (see photos), but the timber is much harder than expected and I’d rather have someone with the right tools finish it cleanly. I’m looking for someone experienced with woodworking/cabinetry who can: * carefully trim/remove the required section of decorative moulding * keep the visible cabinet looking neat * test-fit the cabinet into the alcove * stop once it slides in cleanly The cabinet does not need to be rebuilt or repaired—only the moulding needs trimming. Please bring your own tools (oscillating multi-tool, planer, router, chisels, etc.—whatever you think is most appropriate). I’d love this completed today or tomorrow if possible. Photos attached.

Need help with installing shelves inside a cupboard and shoe cabinet. Need someone to assist with sourcing the shelves as well as installation (7 shelves inside total)

Want a Room Divider Wall Panel 100-240cm for an apartment.

I would like the three bookcases (in the first photo) to be built in from floor to ceiling so as it looks like a permanent fixture (similar to what is shown in the second photo).

Carpentry works required to finish off house 1. Existing skirting to be installed - 25Lm to laundry, back door section and study. 2. Existing laundry door to be fitted with new screws. Hinges existing (May need adjusting as new flooring has been installed with floor prep 3. Rectify damaged weatherboards. Ideally and if it would look nice to cut and replace damaged sections to reduce cost (6Lm of actual damage) to LHS of property and (500mm of actual damage to) 1 section to RHS of property. If the entire length of weatherboard needs to be replaced then lengths amount to 33Lm. 4. Replace damaged plinth board to LHS of property - 9.5Lm All materials to be supplied by carpenter and happy to include in your cost.

Looking for an experienced handyman/carpenter to remove a built-in timber wall cabinet from the living room. Please note the cabinet is attached to a brick wall. I am expecting some patching and painting afterwards, but I would like removal to be as neat as possible. Please remove cabinet carefully to minimise damage to the brick wall and surrounding areas.

Need cabinet work done where an old gas unit once was. Need this area covered/protected but can also be removed for future maintenance.

I have small window section has timber that’s rotten. Needs to be removed replaced and painted . If you can help with this please reach out. Located in Windsor . This is the small piece on both side that needs to be removed and replaced I have attached a photo . Happy to agree on a price

Remove only the bottom shelf of this bathroom cabinet. Appears to be stuck on rather than attached with screws etc Would like to keep it in tact to reattach later if possible. Need to ensure the other sides are not damaged. I assume it's a chisel and hammer type job.

Remove Existing Laundry Shelf & Install IKEA BESTÅ Wall Cabinet Looking for an experienced handyman or cabinet installer to remove an existing wall-mounted shelf in our laundry and install an IKEA BESTÅ wall-mounted cabinet. Cabinet details: * IKEA BESTÅ Wall-Mounted Cabinet * Dimensions: 1200mm W x 420mm D x 640mm H * Cabinet supplied by us Scope of works: * Remove existing wall-mounted shelf/cubby unit * Assemble IKEA cabinet * Securely mount cabinet to wall above laundry sink and washing machine * Ensure cabinet is level and professionally installed Location: Port Melbourne Photos of the existing shelf and new cabinet attached. Looking forward to hearing from you and thank you in advance!

I need a cabinet-maker to build 2 custom wardrobes in my apartment. I want the same design as the ikea ones but custom sizes. Happy to discuss price if needed

Bathroom wall has stains on it. We need to repaint the whole wall or fix the stains. Refer the pictures.

Needing a good floorer to sand and stain floors in rooms as photographed. Hope you can start on Saturday. We want to bring the floors back to natural colour of timber and stain would be clear coat matt finish. Please note this includes the steps on the stairs as well

1) Remove old kitchen bench, draws and cupboards. 2) Build and install IKEA kitchen draws, cupboard, dishwasher alcove 3) Cut sink hole and fit into benchtop 4) Drill hole for mixer tap and fit to bench top

Leg needs to reattached to TV cabinet. It is the rear leg and it will not be visible. Here are the details from the West Elm site https://www.westelm.com.au/mid-century-media-console-large-h418 Simple and sophisticated. The Mid-Century Console's beveled edges, warm acorn colour and bronze-finish hardware celebrate the timeless style of 1950s and '60s modernism. Fitted with three drawers and two cabinets, each with a shelf and wire cutouts, it's the perfect perch for your flatscreen. 147 cm w x 48 cm d x 76 cm h. Made from sustainably sourced wood certified to FSC® standards. Learn more. Made in a Fair Trade Certified™ facility. Solid eucalyptus wood base, acacia wood veneer body; Acorn-stained finish. Antique Bronze-finished hardware. Three drawers open on smooth metal glides. Imported.