Find experienced local carpenters in Melbourne

I need a carpenter that can put one skirt on. 3.2 mt long. Also repair a front window , bottom section only as it’s rotten. Exterior door warped down below needs to looking at. I have a number of jobs on a regular basis through a high profile Real Estate agent. But you will deal directly with the owners. Thank you

Hi, I’m looking for a carpenter/handyman to build a freestanding wall in my warehouse, covering the area shown in the attached photo (approx. 5.7m wide × 3.35m high). Here are the key requirements: The wall should cover as much of the surface as possible with Birch plywood panels, creating a clean and warm “wall-like” appearance. It must be a freestanding wall (not fixed into the concrete wall), but I don’t want it to be too thick, as I’d like to save the space behind. Ideally, it can be made slim (approx. 50–60mm depth) but still stable and safe. Optional: Adding wheels/casters for mobility would be a bonus, but they must not be visible from the front. Needs to be finished neatly so it looks like a proper wall for showroom/product photography. Labour + materials both required – please include supply and delivery of Birch plywood like the attached image Tasker should come to measure the site accurately before building, then return to install. welcome any suggestions.

We are seeking a skilled joiner/shopfitter to fabricate and install custom cabinetry and shelving for a retail store. All work is based on shop drawings (provided) and reference images showing the intended style, finish, and quality. Scope of Works 1. Drawer Unit / Island Section Fabricate and install central island unit as per drawings. Doors: 18mm Surano profile (Polytec). Finish: Prime Oak Woodmatt. End panels: flat profile with 30mm radius, laminated in Prime Oak Woodmatt. Carcass: 16mm white HMR melamine. Benchtop: 18mm Prime Oak Woodmatt, 2500mm x 850mm, tight 30mm radius. Above bench: 2x tiered display boxes, laminated Prime Oak Woodmatt. Joinery includes 2 equal cabinets per side, each with 3 drawers (12 drawers total). Handles: knob or pull handles (design TBC, from Touch Handle Catalogue, up to $15). Note: benchtop and tier box edges will require a laminate join. 2. Shelving Unit Low-line carcass in 16mm white HMR with solid 16mm backing. Doors and panels: 18mm flat Polytec in Prime Oak Woodmatt. Overhead shelving with 1x tier box, colour matched. Solid backing included for overhead shelving for support and weight-bearing. Overall shelving width: 3500mm (split into two sections for strength and installation). Materials & Finishes Polytec Prime Oak Woodmatt for all visible surfaces. 16mm white HMR melamine for internal carcasses. 18mm Surano profile doors. All radiused corners 30mm as per drawings. Drawings & References Detailed CAD drawings with approx plan, elevation, and section views provided (see attached). Photos of the blank wall space, 3D mock-up, and existing joinery in another store included to show desired finish and quality. Additional Notes Allow cut-outs for cable access and future lighting fixtures as marked on drawings. Ensure joinery aligns with site conditions (wall/floor power outlets, stair clearance). Delivery and installation required.

We require someone to supply and fit a marine plywood timber frame/door around our dilapidated timber mdf box. fyi mdf (main distribution frame) only has phone cables, so nothing electrical needs to be done and the job is perfectly safe for any handyman to do fyi2 the inner mdf ceiling and floor are perfectly fine (ie dry and solid), its just the frame is worn out. so this will be just removing the existing door and fitting the frame around the frame. it will need a site visit first to measure up

I need a craft shelving unit cut down to size the bulkhead extended in height and plastered ready for paint. The goal is to be able to install a split system AC on the face so of course framing behind the plaster is required.

Need a new kitchen, keen to understand costs and get a quote. Site access tomorrow.

Sand/stain floorboards for 2 units. Include kitchen area which is lino that needs to be pulled up - need to come to site tomorrow ideally and provide a quote

Wall is shown in the picture, it has bamboo on it. I have the stain but you would need to bring application equipment

Timber door frame column has worn and needs replacing. I have removed the rotten wood but just needs replacing. Balcony door hinges are in good condition but will need lining up so the door is operational.

Remove middle cabinets to install washing machine may require plumbing electrical and cutting laminate to reach under sink I leave pictures but please contact me once you accept and I say yes

Need 3 weatherboards changed at approx 670mm wide each. You will need to pick up 1 weatherboard from bunnings and I will reimburse

Carpentry work for apartment renovation including: 1. Installing new skirtings boards. Approx 60LM (skirtings provided) 2. Install cased opening for living room entrance (Tassie oak hardwood provided) 3. Install transition pieces for back door, bathroom and powder room. (Trade to supply hardwood Tassie oak) 4. Hang new door and hardware for balcony door (door and hardware provided) 5. Replace hinges and handles on 4 existing internal doors and rehang existing doors (hardware provided) 6. Install new deadlock on front door (lock provided) 7. Cover sliding cavity in kitchen no longer used with piece of MDF (trade to supply) Job to be completed before Thursday 18/07

Internal hollow timber door (3.5cm thickness) 1 x cat flap door installation

Blocks to sit on and pick up.Able to be stacked. Made of plywood -- and painted white -- 16 of them -- please let me know whether you will be providing wood/screws/glue/paint as your offer, as I have set the high price to include equipment/materials -- but if you are only providing labour I would expect a lower offer.

Install floating floor boards & IKEA wall cabinets. Floor Boards, drop saw & assembled cabinets supplied. You will need a stud finder & battery small tools.

I need this built "Sharptoo 3 x 1.5m Height Garage Shelving Steel Warehouse Shelf Rack with Adjustable Shelves Black"

Need help with a home project. Creating a behind sofa sideboard with ikea ‘trones’ shoe racks. All I need is the top of the table. If you have a spare piece of wood this could be a quick buck. You’ll need to provide the wood. I need a piece cut to 122cm x 21cm with a curved edge. Thickness at least 2cm. Stained black.

Looking to have hung 2x 2100mm 10kg stainless steel shelves into a drywall 2x 600mm 4kg stainless steel shelves into brick Wall has two studs separated 1200mm apart centred however these will not work for the shelf brackets. Could drill holes into the back of shelves. You will need to: Supply appropriate heavy-duty anchors Properly mount shelf ensuring it's level and secure

Replacement of water damaged door frame in a bathroom Must be a carpenter and complete the job this week. Ideally supply the door frame but can be supplied if need be. Price will be for labour only.