Find experienced local carpenters in Melbourne

I need a custom built table to run along the wall of my studio. I have drawings made up but its just a guide. I'm open to design ideas, but I'm thinking marble look laminate. No power required to the table. Fixed to the wall. Budget friendly. (I already have the mirrors) Measurements 8535w x 750 h x 700 d Renovations are starting on 15 June and will take around 3 weeks. Table will need to be installed around first week July.

I need a bookshelf removed from a house. It is an ikea type bookshelf, connected to the wall with some screws - not built into the wall. I need it taken off the wall and removed from the house - to be put in our back shed

Disassemble joinery in display suite and relocate to Fairfield.

Face of joinery drawer has fallen off and needs repair.

joinery for wardrobes. offer solution and ideas before ordering doors and panels. Then to intall. 3 x bedrooms with 2 wardrobes in each room. Photo below shows layout of all 3 rooms. Close up on the complete skirting boards/ gaps between wall and fireplace. (wardrobes are yet to be secure)

Hello. We have recently had floorboards installed in our house. We need someone to cut the carpet and connect to where the floorboards finish underneath x2 doors. Attached two photos. One is our current situation and the second is what we would like.

I'm looking for an experienced handyman or carpenter to help improve a small outdoor courtyard area in Balaclava. Scope of work includes: 1. Outdoor cupboards: Existing timber cupboard doors are rotting and a couple have fallen off. Need to replace all doors with weatherproof materials (open to recommendations) 2. Remove freestanding bench: Separately, there is a freestanding bench that we would like to dismantle and remove 3. Improve nook area: Removing the freestanding bench will create a nook where we would like to install a built-in bench seat (possibly with storage underneath) 4. General tidy-up, including pressure washing the area (including the deck and stone benchtop) Notes: - Open to recommendations - Open to quotes (please include time and materials) - Happy to facilitate site visits

I have a small storage space under stairs at work, that I want a VERY basic storage sollution that feels more organised / neat. The microwave and fridge need to stay in, but down for new ideas. I have a small business, so I dont have a huge budget, but want help organising it / making it better. I would also obvs cover costs of materials.

Install pre-made cabinet in cavity near pool area. Will need to cleanly cut an opening for pool pump in rear of cabinet. Install cladding over existing timber structure in style of reference procure. All materials including cabinet will be supplied. Installer will need to supply own tools, and fixings. Quality chippies / experienced apprentice only please.

_Finished wall size: 1120x965x150 _Subframe + 18mm Premium Birch Plywood Panelling _Ideally built off-site as there is not much manoeuvring space in the apartment _install on site includes fixing to existing wall and existing kitchen counter top _site measure required _birch plywood can be supplied Potentially other joinery items to follow after this wall installation.

I need some wood reattached to a wall, there is a table attached to it so that has come loose as well.

We have a cabinet door which has come undone and needs glass replacement. All pieces are available just need the glass. And the joinery of the wood. The last photo shows how it is supposed to look.

I need to install a Vertio shelving system from King Living in a ground floor home office. The shelves come as a flat pack but need to be assembled and attached to the wall. Preference for someone experienced with heavy wall/ceiling mounted shelves. I've attached the configuration with measurements.

Supply and install additional black joinery shelf to existing cabinet, including all fixings. Refer attached photos for what the cabinet looks like, and tape measure against the dimensions. Shelf needs to be approximately 470mm deep x 705mm wide x 16mm thick (to match existing). I will remove all of the glassware and storage items and re-put them back myself once new shelf is installed. Let me know if you need any additional info.

Restaurant renovations, all joinery work. Budget is flexible.

Needing Silver Wall Panels Installed ** Quote on labour only. Material will be supplied (attached). To be pressed to MDF by joiner. Supply and Install Wall Paneling 2.7m High with 10mm Shadow line joins Description: Roughly 40 LM. 100 Sq2 Glue and press laminate wall paneling. (Laminate to be provided by client). Fabricate 2x curved walls in same laminate. Inclusive of Laminating supplied doors.

I have a gap alongside my fridge approx ~185cm x ~20cm which I want to be covered by a hinged wood cupboard front made from spare cabinet fronts to match the rest of the kitchen. I need a cabinetmaker or woodworker to: - cut supplied spare ikea cabinets to size - remove the existing square border edging on the cabinets and re-glue onto the cut side - put a backing on the cabinets to enable the required length to be reached (spare cabinets are not long enough to use a single item) - install the new cabinet front on simple hinges (not supplied) in the space allocated. Please note the budget ive set is just a placeholder, I would need a breakdown from qualified taskers to know how to price this item. .

Seeking joiner who can use our GoCabinets flatpack account to create shop drawings, finalise design, order custom joinery in flat pack and then install. Labour only required. We will provide all material.

Joinery Installation Kitchen, Bathroom, Powder, Laundry, 6 x robes

Need an LED strip light with diffuser installed inside a recess that is 18 wide x14 deep x 950mm long