Find experienced local carpenters in Melbourne

I poured bleach on the wood floors and need someone to fix the damage

Need a carpenter to build one timber A-frame throw game from a drawing. Photos and PDF attached. What to build Face: 18 mm structural plywood, 1000 mm wide × 1700 mm high Frame: dressed pine 70 × 35 2 × front legs 1850 mm 2 × rear legs 1600 mm 1 × stay 420 mm, fitted 400 mm off the floor 4 × feet 120 mm A-frame, about 15° lean, footprint 450 mm Two M8 bolts at the crown so the unit folds flat for a car Five holes, holesaw then sand. Centres from the top-left of the face: 50 top — Ø120 — X 500 — Y 380 20 left — Ø150 — X 280 — Y 720 20 right — Ø150 — X 720 — Y 720 10 left — Ø200 — X 300 — Y 1180 10 right — Ø180 — X 740 — Y 1180 Matte black after the holes are cut White 8 mm ring at each hole Score numbers 50 / 20 / 10 painted under each hole No logo and no vinyl graphic — that comes later

Hi, Per photo have some missing skirting in a bedroom in the CBB apartment that I would like to try and get fixed ! Also would like to replace bathroom door handle. Thanks, Lucas

I need a combination of draws and hanging storage built in our master bedroom WIR that is 145 x 145 cm in size. Unfortunately ikea pax is not suitable, so looking for something custom built.

I have 2 boys staying in a 7-8m2 bedroom and need wooden bunk beds built to fit the space. I have custom mattresses 172cm long, 80cm wide at head and 70cm wide at foot. (See diagram attached) Looking to have someone build a set of wooden bunks to fit the space and those mattresses. The measured space is 173cm long in the room. Will need to remove a bench top and part of book case to free the space (see photos) as part of it. The bunk is to sit where the bench top is in the photo. The bunk beds should be wooden with a ladder to top bunk, with a safety rail (one side only) on top bunk. It should have 25cm clearance under bottom bunk for storage for their school bags, basketballs and shoes. Both boys to have enough clearance in their beds to sit up. If someone can do a nice job it will free up space for the boys and give them a bed they are happy and proud of. We live in a 43m2 apartment so space is limited. Would likely ask you about further work including additional small wardrobe and raised shelves above couch area etc to extend our storage options but today it is about building a bunk bed for the kids in a confined space. Cost is for labour. You are expected to have your own necessary tools. Materials cost to be passed on separately

Remove bulkhead above cupboards to open up the area above to the ceiling.

the bed frame long side timber is broken, either replace with that long side/support piece with a stronger piece of timber, or reinformce the broken section by attaching another solid timber length underneath it

Cabinet finishing and installation – side panel + 2 doors labour only I’m looking for someone to finish an existing cabinet carcass with: * 1 side panel * 2 doors, including hinges and installation * All necessary fitting and adjustments Cabinet dimensions: 770W × 700D × 2700H mm The cabinet sits in a corner of the room. The back wall is slightly out of square, with approximately 20mm variation, so some on-site scribing/adjustment will be required for a neat finish. I’m happy to choose the finish from Laminex, or use whatever board/material you recommend as the most practical and cost-effective option. Ideally, I’m looking for someone experienced in cabinetry who can measure, manufacture and install the panels and doors, ensuring everything is properly aligned and finished. Please include labour only in your quote, and let me know if you need additional measurements or photos before quoting.

Quality builder/carpenter/handyman needed to put up internal architraves at home in Cremorne. Three rooms only - medium/small rooms approx 5x3, 3x4 and 3x2- ceiling, floor skirting, and three windows. NOTE: the larger room dosent require ceiling, only floor skirting. All material onsite and ready to go. Profile is lambstongue from bunnings If you can come today this would be great.

Looking for help with the following: 1) cupboard underneath sink has sagging middle shelf as it has been bearing too much weight. Require requires a fix or replacement plank. Replacement plank would require a hole in it for pipes. 2) there is some minor rusting around the pipe that connects the dishwasher outlet to the plumbing. I would like that replaced. 3) reattach a cupboard door in front of hot water system using hinges provided See photos and please ask more questions if required

Replace the hinges and latches on a 2-door vanity cabinet beneath the bathroom sink. All replacement hardware (hinges, latches, screws) is fully supplied. Remove four existing flush-mount cabinet hinges (two per door) and fit new ones. Remove two existing double ball latches (top and bottom strike plates & catches) and install new replacements. Make sure the doors are properly aligned, swing freely, and catch securely. Access under the sink is straightforward; photos attached show the current hardware and cabinet layout.

Carpenter Required – Replace Damaged/Rotten Door Architrave & Timber Trim Task Description We require an experienced carpenter/handyman to repair and replace damaged timber architrave/trim around an internal doorway. Sections of the existing timber have deteriorated, particularly around the bottom corners and along the lower/side sections of the door frame. Please refer to the attached photos and measurements. Scope of works: * Remove the damaged/rotted sections of existing timber architrave/trim. * Supply and install replacement timber of a matching or closest available profile and dimensions. * Check the surrounding timber to ensure all deteriorated material is removed. * Cut and join replacement sections neatly into the existing architrave. * Fill nail holes, gaps and joins. * Sand and prepare repaired areas. * Caulk where required for a clean finish. * Prime and paint the new/repaired timber white to match the existing finish. * Remove and dispose of all damaged timber and waste. * Leave the work area clean and tidy. The attached photographs include measurements of the affected areas; however, the successful Tasker should confirm all dimensions on site before purchasing/cutting materials. We are looking for a neat, professional repair rather than a temporary patch.

Timber courtyard door at an apartment in Richmond has become tight and is sticking/rubbing against the frame, particularly around the latch side. It takes more force than it should to open and close and can make quite a bit of noise when closing. Looking for someone to inspect and adjust the door so it opens and closes smoothly. It may need to be planed/shaved slightly and the exposed timber resealed, or otherwise adjusted as appropriate. Ideally looking to have this done fairly soon as the apartment is about to be made available for a long-term tenant.

1 mirrored bathroom cabinet to be installed

Two floorboards are damaged and need replaced. The replacement boards don't need to perfectly match (this is coming ahead of a later renovation), but a close stain would be great.

Help, my bathroom cabinet has fallen off and is in need of desperate repair.

We are adding carpet to 3 bedrooms and we need someone to shave the bottom of 12 doors (3 bedrooms and 9 wardrobe doors). The doors have been removed and labeled. We need the doors cut onsite which can be done outside or in our garage and then rehung the same day. The house is in Essendon.

A kitchen cabinet door - perspex - about 114cm high (so a bit heavy and bulky) needs to be rehung on 3 existing hinges - we have the fixing screws. The cabinet is above a benchtop. There are two other kitchen cabinet doors where the hinges need adjusting and another hinge on a laundry cupboard that needs to be re-clipped.

I wish to fit a robo vacuum under kitchen sink cabinet. This would require cutting the existing shelves and giving support.

I need a clean circular hole cut into the side of this steel cupboard. I cut a rough hole in it myself to feed the washine machine hose through, but I need a cleaner hole cut in before I move out. The laundry cupboard has one of those slim stainless-steel laundry troughs with a storage cabinet underneath, next to the washing machine. The washing machine will be moved out of the apartment on Friday 7 Aug so I'd like someone to come on Saturday 8 Aug.